• kvm虚拟化关闭虚拟网卡virbr0的方法


    我们知道:kvm虚拟化环境安装好后,ifconfig会发现多了一个虚拟网卡virbr0
    这是由于安装和启用了libvirt服务后生成的,libvirt在服务器(host)上生成一个 virtual network switch (virbr0),host上所有的虚拟机(guests)通过这个 virbr0 连起来。默认情况下 virbr0 使用的是 NAT 模式(采用 IP Masquerade),所以这种情况下 guest 通过 host 才能访问外部。

    但是大多数情况下:
    我们虚拟机使用的是bridge(网桥)直接连到局域网里,所以这个 virbr0 不是必须的(注:不要搞混淆了,bridge 和这里的 virbr0 bridge 是互不相干的)。

    那么如何关掉这个 virbr0 呢?

    下面对关闭这个virbr0虚拟网卡的操作做一记录:

    总结为以下三步:
    1)首先net-destroy
    2)接着net-undefine
    3)最后重启libvirtd让设置生效

    [root@kvmserver ~]# ifconfig
    br0 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4F
    inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::ca1f:66ff:fef4:fc4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:135245 errors:0 dropped:0 overruns:0 frame:0
    TX packets:101444 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:13942261 (13.2 MiB) TX bytes:7634359 (7.2 MiB)

    em1 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4E
    inet addr:103.10.86.8 Bcast:103.10.86.63 Mask:255.255.255.192
    inet6 addr: fe80::ca1f:66ff:fef4:fc4e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1565647 errors:0 dropped:0 overruns:0 frame:0
    TX packets:433759 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:371869769 (354.6 MiB) TX bytes:332186615 (316.7 MiB)
    Interrupt:35

    em2 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4F
    inet6 addr: fe80::ca1f:66ff:fef4:fc4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1306151 errors:0 dropped:0 overruns:0 frame:0
    TX packets:95447 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:163400847 (155.8 MiB) TX bytes:7174405 (6.8 MiB)
    Interrupt:38

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:128908 errors:0 dropped:0 overruns:0 frame:0
    TX packets:128908 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:25188477 (24.0 MiB) TX bytes:25188477 (24.0 MiB)

    virbr0 Link encap:Ethernet HWaddr 52:54:00:E7:2D:22
    inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    [root@kvmserver ~]# brctl show
    bridge name bridge id STP enabled interfaces
    br0 8000.c81f66f4fc4f no em2
    virbr0 8000.525400e72d22 yes virbr0-nic

    [root@kvmserver ~]# virsh net-list
    Name State Autostart Persistent
    --------------------------------------------------
    br0 active yes yes
    default active yes yes

    [root@kvmserver ~]# virsh net-destroy default
    Network default destroyed

    [root@kvmserver ~]# virsh net-undefine default
    Network default has been undefined

    [root@kvmserver ~]# service libvirtd restart
    Stopping libvirtd daemon: [ OK ]
    Starting libvirtd daemon: [ OK ]
    [root@kvmserver ~]# virsh net-list
    Name State Autostart Persistent
    --------------------------------------------------
    br0 active yes yes

    [root@kvmserver ~]# brctl show
    bridge name bridge id STP enabled interfaces
    br0 8000.c81f66f4fc4f no em2

    再次ifconfig查看,发现virtbr0网卡已经消失了!
    [root@kvmserver ~]# ifconfig
    br0 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4F
    inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::ca1f:66ff:fef4:fc4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:161858 errors:0 dropped:0 overruns:0 frame:0
    TX packets:123581 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:15735341 (15.0 MiB) TX bytes:9481865 (9.0 MiB)

    em1 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4E
    inet addr:103.10.86.8 Bcast:103.10.86.63 Mask:255.255.255.192
    inet6 addr: fe80::ca1f:66ff:fef4:fc4e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1850577 errors:0 dropped:0 overruns:0 frame:0
    TX packets:696879 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:407720396 (388.8 MiB) TX bytes:592419489 (564.9 MiB)
    Interrupt:35

    em2 Link encap:Ethernet HWaddr C8:1F:66:F4:FC:4F
    inet6 addr: fe80::ca1f:66ff:fef4:fc4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1572393 errors:0 dropped:0 overruns:0 frame:0
    TX packets:115724 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:196738740 (187.6 MiB) TX bytes:8750347 (8.3 MiB)
    Interrupt:38

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:350174 errors:0 dropped:0 overruns:0 frame:0
    TX packets:350174 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:68170777 (65.0 MiB) TX bytes:68170777 (65.0 MiB)

  • 相关阅读:
    第三十一篇 玩转数据结构——并查集(Union Find)
    第三十篇 玩转数据结构——字典树(Trie)
    开发Electron可能用到的工具
    最新NetMonitor代码
    用C++/CLI搭建C++和C#之间的桥梁
    xaml实现无边框窗口
    用xaml画的带阴影3D感的圆球
    创作了一个xml的替代格式
    域名投资入门和技巧
    Compaq Visual Fortran生成静态库的方法及使用
  • 原文地址:https://www.cnblogs.com/kevingrace/p/5772589.html
Copyright © 2020-2023  润新知