• Linux


    ifconfig

    查看生效的ip信息。

    [root@local ~]# ifconfig
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.70.77  netmask 255.255.255.0  broadcast 192.168.70.255
            inet6 fe80::20c:29ff:fe6e:b72b  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:6e:b7:2b  txqueuelen 1000  (Ethernet)
            RX packets 7492  bytes 625846 (611.1 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 3334  bytes 451391 (440.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 0  (Local Loopback)
            RX packets 12  bytes 1020 (1020.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 12  bytes 1020 (1020.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
            ether 52:54:00:8c:58:59  txqueuelen 0  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    

    ifconfig 命令看不到网关和DNS。

    ifdown,ifup

    关闭和启动网卡

    [root@local ~]# ifdown lo
    [root@local ~]# ifconfig
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.70.77  netmask 255.255.255.0  broadcast 192.168.70.255
            inet6 fe80::20c:29ff:fe6e:b72b  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:6e:b7:2b  txqueuelen 1000  (Ethernet)
            RX packets 7600  bytes 634935 (620.0 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 3384  bytes 457849 (447.1 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
            ether 52:54:00:8c:58:59  txqueuelen 0  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    
    
    [root@local ~]# ifup lo
    [root@local ~]# ifconfig
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.70.77  netmask 255.255.255.0  broadcast 192.168.70.255
            inet6 fe80::20c:29ff:fe6e:b72b  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:6e:b7:2b  txqueuelen 1000  (Ethernet)
            RX packets 7647  bytes 638881 (623.9 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 3416  bytes 462387 (451.5 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 0  (Local Loopback)
            RX packets 12  bytes 1020 (1020.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 12  bytes 1020 (1020.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
            ether 52:54:00:8c:58:59  txqueuelen 0  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    

    netstat

    查看网络状态

    -t 列出tcp协议端口

    -u 列出udp协议端口

    -n 不使用域名与服务名,使用IP和端口

    -l 列出监听状态的网络服务

    -a 列出所有的网络连接

    -r 路由信息

    -p 列出pid,进程id

    [root@local ~]# netstat -rn
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
    0.0.0.0         192.168.70.70   0.0.0.0         UG        0 0          0 eno16777736
    192.168.70.0    0.0.0.0         255.255.255.0   U         0 0          0 eno16777736
    
    [root@local ~]# route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         192.168.70.70   0.0.0.0         UG    100    0        0 eno16777736
    192.168.70.0    0.0.0.0         255.255.255.0   U     100    0        0 eno16777736
    
    
    [root@local ~]# netstat -anp|grep :22
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      1185/sshd           
    tcp        0     52 192.168.70.77:22        192.168.70.33:58840     ESTABLISHED 2436/sshd: root@pts 
    tcp6       0      0 :::22                   :::*                    LISTEN      1185/sshd           
    [root@local ~]# netstat -an|grep :22
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN     
    tcp        0     52 192.168.70.77:22        192.168.70.33:58840     ESTABLISHED
    tcp6       0      0 :::22                   :::*                    LISTEN     
    
    
    [root@local ~]# netstat -tunl
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State      
    tcp        0      0 192.168.122.1:53        0.0.0.0:*               LISTEN     
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN     
    tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN     
    tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN     
    tcp6       0      0 :::22                   :::*                    LISTEN     
    tcp6       0      0 ::1:631                 :::*                    LISTEN     
    tcp6       0      0 ::1:25                  :::*                    LISTEN     
    udp        0      0 192.168.122.1:53        0.0.0.0:*                          
    udp        0      0 0.0.0.0:67              0.0.0.0:*                          
    udp        0      0 0.0.0.0:5353            0.0.0.0:*                          
    udp        0      0 127.0.0.1:323           0.0.0.0:*                          
    udp        0      0 0.0.0.0:46466           0.0.0.0:*                          
    udp6       0      0 ::1:323                 :::*           
    

    通过这条指令查看当前计算机开启了哪些服务。

    [root@local ~]# netstat -an|grep ESTABLISHED
    tcp        0     52 192.168.70.77:22        192.168.70.33:58840     ESTABLISHED
    

    查看正在连接我的计算机。

    [root@local ~]# netstat -an|grep ESTABLISHED |wc -l
    1
    

    通过两个管道可以统计出数量。

    网关不可以乱设置,如果设置多个,或者设置的网关地址不存在,很可能就无法上网了。

    nslookup

    查看DNS

    [root@local ~]# nslookup www.qq.com
    Server:		114.114.114.114
    Address:	114.114.114.114#53
    
    Non-authoritative answer:
    Name:	www.qq.com
    Address: 180.96.86.192
    
    [root@local ~]# ping www.qq.com
    PING www.qq.com (180.96.86.192) 56(84) bytes of data.
    64 bytes from 180.96.86.192: icmp_seq=1 ttl=54 time=9.60 ms
    64 bytes from 180.96.86.192: icmp_seq=2 ttl=54 time=9.33 ms
    
    

    ping 命令

    查看是否可以通信

    [root@local ~]# ping -c 4 www.baidu.com
    PING www.a.shifen.com (180.97.33.107) 56(84) bytes of data.
    64 bytes from 180.97.33.107: icmp_seq=1 ttl=55 time=9.04 ms
    64 bytes from 180.97.33.107: icmp_seq=2 ttl=55 time=10.2 ms
    64 bytes from 180.97.33.107: icmp_seq=3 ttl=55 time=9.07 ms
    64 bytes from 180.97.33.107: icmp_seq=4 ttl=55 time=14.9 ms
    
    --- www.a.shifen.com ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3005ms
    rtt min/avg/max/mdev = 9.042/10.825/14.948/2.429 ms
    
    

    telnet

    远程管理,明文通信。数据包在互联网上不会被加密。建议少用。

    traceroute

    跟踪查看路由命令

    [root@local ~]# traceroute www.baidu.com
    traceroute to www.baidu.com (180.97.33.107), 30 hops max, 60 byte packets
     1  192.168.70.70 (192.168.70.70)  0.275 ms  0.274 ms  0.223 ms
     2  192.168.1.1 (192.168.1.1)  0.555 ms  0.604 ms  0.534 ms
     3  100.73.0.1 (100.73.0.1)  3.010 ms  3.316 ms  3.267 ms
     4  222.187.235.217 (222.187.235.217)  2.718 ms  2.646 ms  2.585 ms
     5  222.187.235.105 (222.187.235.105)  13.826 ms  13.559 ms  13.826 ms
     6  202.102.73.122 (202.102.73.122)  16.276 ms 202.102.73.126 (202.102.73.126)  19.856 ms 202.102.69.186 (202.102.69.186)  13.546 ms
     7  * * *
     8  180.97.32.130 (180.97.32.130)  13.049 ms 180.97.32.26 (180.97.32.26)  139.445 ms 180.97.32.2 (180.97.32.2)  10.769 ms
     9  * * *
    [root@local ~]# ping www.baidu.com
    PING www.a.shifen.com (180.97.33.107) 56(84) bytes of data.
    64 bytes from 180.97.33.107: icmp_seq=1 ttl=55 time=9.25 ms
    64 bytes from 180.97.33.107: icmp_seq=2 ttl=55 time=9.55 ms
    64 bytes from 180.97.33.107: icmp_seq=3 ttl=55 time=9.30 ms
    
    

    *** 表示ping不同的地址

    wget

    下载命令

    tcpdump

    抓包命令

    [root@local 桌面]# tcpdump -i eth0 -nnX port 22
    

    -i 指定监听的网卡

    -nn 将数据包中的域名与服务转为ip和端口

    -X 以16进制和ASCII码显示数据包内容

    prot指定监听的端口

    scp

    远程上传或者下载

    [root@localhost ~]# scp -r testscp/ root@192.168.70.77:/root
    The authenticity of host '192.168.70.77 (192.168.70.77)' can't be established.
    RSA key fingerprint is c1:d1:80:44:94:0b:e2:fb:b4:82:20:79:5f:94:5f:41.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added '192.168.70.77' (RSA) to the list of known hosts.
    root@192.168.70.77's password: 
    hello                                                                         100%   10     0.0KB/s   00:00 
    

    这个是上传。

    [root@localhost testscp]# scp -r root@192.168.70.77:/root/testscp /root
    root@192.168.70.77's password: 
    hello                                                                         100%   10     0.0KB/s   00:00    
    world                                                                         100%   12     0.0KB/s   00:00  
    

    这个是下载。

  • 相关阅读:
    MySQL对于数据库应该如何如何配置安全问题了
    对于改善 MySQL 数据装载操作有效率的方法是怎样
    MySQL与SQL比较有那些区别呢
    Centos6.5和Centos7 php环境搭建如何实现呢
    php单例模式是怎么实现的呢
    PHP编写的图片验证码类文件分享方法
    PHP中header函数的用法及其注意重点是什么呢
    java正则表达式四种常用的处理方式是怎么样呢《匹配、分割、代替、获取》
    PHP弱类型安全问题的写法和步骤
    vs2010 使用IIS EXPRESS出错.
  • 原文地址:https://www.cnblogs.com/jiqing9006/p/8321082.html
Copyright © 2020-2023  润新知