Pset_ProjectOrderMaintenanceWorkOrder

Pset_ProjectOrderMaintenanceWorkOrder

项目订单维护工作订单：维护工作订单是对要执行的维护工作的详细描述。请注意，当需要维护工单作为计划工单实例时，将使用维护工单的计划频率属性。

Name

Type

Description

ProductDescription

P_SINGLEVALUE / IfcText

Product Description

A textual description of the products that require the work.

WorkTypeRequested

P_SINGLEVALUE / IfcText

Work Type Requested

Work type requested in circumstances where there are categorizations of types of work task. It could be used to identify a remedial task, minor work task, electrical task etc.

ContractualType

P_SINGLEVALUE / IfcText

Contractual Type

The contractual type of the work.

IfNotAccomplished

P_SINGLEVALUE / IfcText

If Not Accomplished

Comments if the job is not accomplished.

MaintenaceType

P_ENUMERATEDVALUE / IfcLabel / PEnum_MaintenanceType

Maintenace Type

Identifies the predefined types of maintenance that can be done from which the type that generates the maintenance work order may be set where: ConditionBased: generated as a result of the condition of an asset or artefact being less than a determined value. Corrective: generated as a result of an immediate and urgent need for maintenance action. PlannedCorrective: generated as a result of immediate corrective action being needed but with sufficient time available for the work order to be included in maintenance planning. Scheduled: generated as a result of a fixed, periodic maintenance requirement.

FaultPriorityType

P_ENUMERATEDVALUE / IfcLabel / PEnum_PriorityType

Fault Priority Type

Identifies the predefined types of priority that can be assigned from which the type may be set where: High: action is required urgently. Medium: action can occur within a reasonable period of time. Low: action can occur when convenient.

LocationPriorityType

P_ENUMERATEDVALUE / IfcLabel / PEnum_PriorityType

Location Priority Type

Identifies the predefined types of priority that can be assigned from which the type may be set where: High: action is required urgently. Medium: action can occur within a reasonable period of time. Low: action can occur when convenient.

ScheduledFrequency

P_SINGLEVALUE / IfcTimeMeasure

Scheduled Frequency

The period of time between expected instantiations of a work order that may have been predefined.

##############################