• 飞思卡尔IMX6启动信息


    U-Boot 2014.04 (May 26 2015 - 12:41:13)
    
    
    CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
    
    CPU:   Temperature 33 C, calibration data: 0x5b14f47d
    
    Reset cause: POR
    
    Board: MX6-SabreSD
    
    I2C:   ready
    
    DRAM:  1 GiB
    
    MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
    
    *** Warning - bad CRC, using default environment
    
    
    No panel detected: default to Hannstar-XGA
    
    Display: Hannstar-XGA (1024x768)
    
    In:    serial
    
    Out:   serial
    
    Err:   serial
    
    Found PFUZE100 deviceid=10,revid=11
    
    mmc1 is current device
    
    Net:   FEC [PRIME]
    
    Normal Boot
    
    Hit any key to stop autoboot:  0 
    
    mmc1 is current device
    
    reading boot.scr
    
    ** Unable to read file boot.scr **
    
    reading zImage
    
    5930344 bytes read in 278 ms (20.3 MiB/s)
    
    Booting from mmc ...
    
    reading imx6q-sabresd.dtb
    
    42235 bytes read in 19 ms (2.1 MiB/s)
    
    Kernel image @ 0x12000000 [ 0x000000 - 0x5a7d68 ]
    
    ## Flattened Device Tree blob at 18000000
    
       Booting using the fdt blob at 0x18000000
    
       Using Device Tree in place at 18000000, end 1800d4fa
    
    switch to ldo_bypass mode!
    
    
    Starting kernel ...
    
    
    Booting Linux on physical CPU 0x0
    Linux version 3.14.28-1.0.0_ga+g91cf351 (null@null-dev) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon May 25 17:25:16 CST 2015
    CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Freescale i.MX6 Quad SABRE Smart Device Board
    cma: CMA: reserved 320 MiB at 3c000000
    Memory policy: Data cache writealloc
    PERCPU: Embedded 8 pages/cpu @ab723000 s8896 r8192 d15680 u32768
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
    Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk2p2 rootwait rw
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 696472K/1048576K available (7209K kernel code, 394K rwdata, 6144K rodata, 328K init, 428K bss, 352104K reserved, 0K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
        vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
        lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
        pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
        modules : 0x7f000000 - 0x7fe00000   (  14 MB)
          .text : 0x80008000 - 0x80d12640   (13354 kB)
          .init : 0x80d13000 - 0x80d652c0   ( 329 kB)
          .data : 0x80d66000 - 0x80dc8a80   ( 395 kB)
           .bss : 0x80dc8a8c - 0x80e33d5c   ( 429 kB)
    SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Preemptible hierarchical RCU implementation.
    NR_IRQS:16 nr_irqs:16 16
    L310 cache controller enabled
    l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32070000, Cache size: 1024 kB
    Switching to timer-based delay loop
    sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x106dcfb8 - 0x106dd010
    CPU1: Booted secondary processor
    CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    CPU2: Booted secondary processor
    CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
    CPU3: Booted secondary processor
    CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
    Brought up 4 CPUs
    SMP: Total of 4 processors activated.
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    pinctrl core: initialized pinctrl subsystem
    regulator-dummy: no parameters
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor ladder
    cpuidle: using governor menu
    CPU identified as i.MX6Q, silicon rev 1.2
    Use WDOG2 as reset source
    syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
    vdd1p1: 800 <--> 1375 mV at 1100 mV 
    vdd3p0: 2800 <--> 3150 mV at 3000 mV 
    vdd2p5: 2000 <--> 2750 mV at 2400 mV 
    vddarm: 725 <--> 1450 mV 
    vddpu: 725 <--> 1450 mV 
    vddsoc: 725 <--> 1450 mV 
    syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
    syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
    bio: create slab <bio-0> at 0
    mxs-dma 110000.dma-apbh: initialized
    usb_otg_vbus: 5000 mV 
    usb_h1_vbus: 5000 mV 
    wm8962-supply: no parameters
    mipi_dsi_pwr_on: no parameters
    sensor-supply: 3300 mV 
    i2c-core: driver [max17135] using legacy suspend method
    i2c-core: driver [max17135] using legacy resume method
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    usbphy_nop1.12 supply vcc not found, using dummy regulator
    usbphy_nop2.13 supply vcc not found, using dummy regulator
    i2c i2c-0: IMX I2C adapter registered
    i2c i2c-1: IMX I2C adapter registered
    i2c i2c-2: IMX I2C adapter registered
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
    imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
    mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
    mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
    MIPI CSI2 driver module loaded
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.18
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource mxc_timer1
    NET: Registered protocol family 2
    TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP: reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    imx6_busfreq busfreq.16: DDR medium rate not supported.
    Bus freq driver module loaded
    futex hash table entries: 1024 (order: 4, 65536 bytes)
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
    fuse init (API version 7.22)
    msgmni has been set to 2000
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    imx-weim 21b8000.weim: Driver registered.
    backlight.29 supply power not found, using dummy regulator
    mxc_mipi_dsi 21e0000.mipi: i.MX MIPI DSI driver probed
    MIPI DSI driver module loaded
    mxc_sdc_fb fb.24: registered mxc display driver ldb
    imx-ipuv3 2800000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
    Console: switching to colour frame buffer device 128x48
    mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
    fbcvt: 1920x1080@60: CVT Name - 2.073M9
    mxc_sdc_fb fb.25: registered mxc display driver hdmi
    mxc_sdc_fb fb.26: registered mxc display driver lcd
    mxc_sdc_fb fb.26: ipu0-di0 already in use
    mxc_sdc_fb: probe of fb.26 failed with error -16
    mxc_sdc_fb fb.27: registered mxc display driver ldb
    imx-sdma 20ec000.sdma: no iram assigned, using external mem
    imx-sdma 20ec000.sdma: no event needs to be remapped
    imx-sdma 20ec000.sdma: loaded firmware 3.1
    imx-sdma 20ec000.sdma: initialized
    pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1
    pfuze100-regulator 1-0008: FAB: 0, FIN: 0
    pfuze100-regulator 1-0008: pfuze100 found.
    SW1AB: 300 <--> 1875 mV at 1150 mV 
    SW1C: 300 <--> 1875 mV at 1175 mV 
    SW2: 800 <--> 3300 mV at 3300 mV 
    SW3A: 400 <--> 1975 mV at 1500 mV 
    SW3B: 400 <--> 1975 mV at 1500 mV 
    SW4: 800 <--> 3300 mV at 3150 mV 
    SWBST: 5000 <--> 5150 mV at 5000 mV 
    VSNVS: 1000 <--> 3000 mV at 3000 mV 
    VREFDDR: 750 mV 
    VGEN1: 800 <--> 1550 mV at 1500 mV 
    VGEN2: 800 <--> 1550 mV at 1500 mV 
    VGEN3: 1800 <--> 3300 mV at 2800 mV 
    VGEN4: 1800 <--> 3300 mV at 1800 mV 
    VGEN5: 1800 <--> 3300 mV at 3000 mV 
    VGEN6: 1800 <--> 3300 mV at 3300 mV 
    Serial: IMX driver
    2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
    console [ttymxc0] enabled
    serial: Freescale lpuart driver
    imx sema4 driver is registered.
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized vivante 1.0.0 20120216 on minor 0
    brd: module loaded
    loop: module loaded
    ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
    ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
    ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
    ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
    ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
    ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
    ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
    scsi0 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
    m25p80 spi0.0: m25p32 (4096 Kbytes)
    spi_imx 2008000.ecspi: probed
    CAN device driver interface
    2188000.ethernet supply phy not found, using dummy regulator
    pps pps0: new PPS source ptp0
    libphy: fec_enet_mii_bus: probed
    fec 2188000.ethernet eth0: registered PHC device 0
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-mxc: Freescale On-Chip EHCI Host driver
    usbcore: registered new interface driver usb-storage
    2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
    ci_hdrc ci_hdrc.1: doesn't support gadget
    ci_hdrc ci_hdrc.1: EHCI Host Controller
    ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
    ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    mousedev: PS/2 mouse device common for all mice
    egalax_ts 1-0004: Failed to read firmware version
    egalax_ts: probe of 1-0004 failed with error -5
    input: EETI eGalax Touch Screen as /devices/soc0/soc.0/2100000.aips-bus/21a8000.i2c/i2c-2/2-0004/input/input1
    input: max11801_ts as /devices/soc0/soc.0/2100000.aips-bus/21a4000.i2c/i2c-1/1-0048/input/input2
    input: isl29023 light sensor as /devices/virtual/input/input3
    isl29023 2-0044: driver version 1.0 enabled
    i2c-core: driver [isl29023] using legacy suspend method
    i2c-core: driver [isl29023] using legacy resume method
    snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
    i2c /dev entries driver
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    mxc_v4l2_output v4l2_out.32: V4L2 device registered as video16
    mxc_v4l2_output v4l2_out.32: V4L2 device registered as video17
    mxc_v4l2_output v4l2_out.32: V4L2 device registered as video18
    mxc_v4l2_output v4l2_out.32: V4L2 device registered as video19
    mxc_v4l2_output v4l2_out.32: V4L2 device registered as video20
    mag3110 2-000e: check mag3110 chip ID
    ata1: SATA link down (SStatus 0 SControl 300)
    ahci-imx 2200000.sata: no device found, disabling link.
    ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
    input: mag3110 as /devices/virtual/input/input4
    mag3110 2-000e: mag3110 is probed
    i2c-core: driver [mag3110] using legacy suspend method
    i2c-core: driver [mag3110] using legacy resume method
    input: mma845x as /devices/virtual/input/input5
    imx2-wdt 20c0000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
    Bluetooth: HCI UART driver ver 2.2
    Bluetooth: HCI H4 protocol initialized
    Bluetooth: HCI BCSP protocol initialized
    Bluetooth: HCIATH3K protocol initialized
    usbcore: registered new interface driver bcm203x
    usbcore: registered new interface driver btusb
    Bluetooth: Generic Bluetooth SDIO driver ver 0.1
    usbcore: registered new interface driver ath3k
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc1: no vqmmc regulator found
    mmc1: no vmmc regulator found
    mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
    mmc2: no vqmmc regulator found
    mmc2: no vmmc regulator found
    mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
    mmc3: no vqmmc regulator found
    mmc3: no vmmc regulator found
    mmc3: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
    Galcore version 5.0.11.25762
    mmc2: new high speed SDHC card at address e624
    mmcblk2: mmc2:e624 SU08G 7.40 GiB 
     mmcblk2: p1 p2
    mmc3: new high speed DDR MMC card at address 0001
    mmcblk3: mmc3:0001 SEM08G 7.39 GiB 
    mmcblk3boot0: mmc3:0001 SEM08G partition 1 1.00 MiB
    mmcblk3boot1: mmc3:0001 SEM08G partition 2 1.00 MiB
    mmcblk3rpmb: mmc3:0001 SEM08G partition 3 128 KiB
     mmcblk3: unknown partition table
     mmcblk3boot1: unknown partition table
     mmcblk3boot0: unknown partition table
    mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
    mxc_vpu 2040000.vpu: VPU initialized
    caam 2100000.caam: Instantiated RNG4 SH0
    caam 2100000.caam: Instantiated RNG4 SH1
    caam 2100000.caam: device ID = 0x0a160100 (Era 4)
    caam 2100000.caam: job rings = 2, qi = 0
    caam algorithms registered in /proc/crypto
    caam_jr 2101000.jr0: registering rng-caam
    platform caam_sm: blkkey_ex: 4 keystore units available
    platform caam_sm: 64-bit clear key:
    platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
    platform caam_sm: 64-bit black key:
    platform caam_sm: [0000] f4 ff e7 22 84 f0 ba d4
    platform caam_sm: [0008] 85 8e 96 53 66 ab 8a 8f
    platform caam_sm: 128-bit clear key:
    platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
    platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
    platform caam_sm: 128-bit black key:
    platform caam_sm: [0000] 80 f2 9e 49 e1 ad e4 20
    platform caam_sm: [0008] 79 4f 59 aa e2 c2 0e a3
    platform caam_sm: 192-bit clear key:
    platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
    platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
    platform caam_sm: [0016] 10 11 12 13 14 15 16 17
    platform caam_sm: 192-bit black key:
    platform caam_sm: [0000] c6 d0 2d d2 0f 62 fa b9
    platform caam_sm: [0008] 90 69 72 16 04 77 70 d2
    platform caam_sm: [0016] f6 d2 0d 8e 6d dc 32 17
    platform caam_sm: [0024] c2 32 f6 67 ad b2 a6 9e
    platform caam_sm: 256-bit clear key:
    platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
    platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
    platform caam_sm: [0016] 10 11 12 13 14 15 16 17
    platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f
    platform caam_sm: 256-bit black key:
    platform caam_sm: [0000] 07 fe 1e 38 6f 60 b5 ee
    platform caam_sm: [0008] 2a b1 b0 13 ce 69 d6 e5
    platform caam_sm: [0016] fc 26 5c d2 f2 5f cf 77
    platform caam_sm: [0024] cd 30 ed d4 c1 14 bc 76
    platform caam_sm: 64-bit unwritten blob:
    platform caam_sm: [0000] 00 00 00 00 00 00 00 00
    platform caam_sm: [0008] 00 00 00 00 00 00 00 00
    platform caam_sm: [0016] 00 00 00 00 00 00 00 00
    platform caam_sm: [0024] 00 00 00 00 00 00 00 00
    platform caam_sm: [0032] 00 00 00 00 00 00 00 00
    platform caam_sm: [0040] 00 00 00 00 00 00 00 00
    platform caam_sm: [0048] 00 00 00 00 00 00 00 00
    platform caam_sm: [0056] 00 00 00 00 00 00 00 00
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 128-bit unwritten blob:
    platform caam_sm: [0000] 00 00 00 00 00 00 00 00
    platform caam_sm: [0008] 00 00 00 00 00 00 00 00
    platform caam_sm: [0016] 00 00 00 00 00 00 00 00
    platform caam_sm: [0024] 00 00 00 00 00 00 00 00
    platform caam_sm: [0032] 00 00 00 00 00 00 00 00
    platform caam_sm: [0040] 00 00 00 00 00 00 00 00
    platform caam_sm: [0048] 00 00 00 00 00 00 00 00
    platform caam_sm: [0056] 00 00 00 00 00 00 00 00
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 196-bit unwritten blob:
    platform caam_sm: [0000] 00 00 00 00 00 00 00 00
    platform caam_sm: [0008] 00 00 00 00 00 00 00 00
    platform caam_sm: [0016] 00 00 00 00 00 00 00 00
    platform caam_sm: [0024] 00 00 00 00 00 00 00 00
    platform caam_sm: [0032] 00 00 00 00 00 00 00 00
    platform caam_sm: [0040] 00 00 00 00 00 00 00 00
    platform caam_sm: [0048] 00 00 00 00 00 00 00 00
    platform caam_sm: [0056] 00 00 00 00 00 00 00 00
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 256-bit unwritten blob:
    platform caam_sm: [0000] 00 00 00 00 00 00 00 00
    platform caam_sm: [0008] 00 00 00 00 00 00 00 00
    platform caam_sm: [0016] 00 00 00 00 00 00 00 00
    platform caam_sm: [0024] 00 00 00 00 00 00 00 00
    platform caam_sm: [0032] 00 00 00 00 00 00 00 00
    platform caam_sm: [0040] 00 00 00 00 00 00 00 00
    platform caam_sm: [0048] 00 00 00 00 00 00 00 00
    platform caam_sm: [0056] 00 00 00 00 00 00 00 00
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 64-bit black key in blob:
    platform caam_sm: [0000] 21 39 7a cb f1 a0 2b 46
    platform caam_sm: [0008] e6 f6 f2 0a 05 e4 73 d2
    platform caam_sm: [0016] 43 b5 ce 7c 98 70 2c 95
    platform caam_sm: [0024] 08 2d 9f 61 0e 08 b7 76
    platform caam_sm: [0032] 22 26 cc 8b c0 01 d3 7b
    platform caam_sm: [0040] 65 69 fe 91 db a8 09 51
    platform caam_sm: [0048] 3c 64 15 8b f9 56 8a 37
    platform caam_sm: [0056] 00 00 00 00 00 00 00 00
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 128-bit black key in blob:
    platform caam_sm: [0000] b5 26 f3 c8 a7 84 83 a8
    platform caam_sm: [0008] 50 d7 68 16 a7 6c 36 cc
    platform caam_sm: [0016] 91 dd 17 1c fb 80 04 1c
    platform caam_sm: [0024] b6 0d 46 71 36 86 f9 3c
    platform caam_sm: [0032] 74 e9 25 77 b4 c4 eb 5f
    platform caam_sm: [0040] 37 2c d6 92 c3 16 f7 b9
    platform caam_sm: [0048] d2 f6 63 e6 5c 2f e3 cb
    platform caam_sm: [0056] e0 78 28 38 77 d2 3b 47
    platform caam_sm: [0064] 00 00 00 00 00 00 00 00
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 192-bit black key in blob:
    platform caam_sm: [0000] 10 dc c0 bf f8 1f 57 ca
    platform caam_sm: [0008] 60 d5 03 6d ea da 59 4e
    platform caam_sm: [0016] 8c 74 ac d9 0d 0f 8b f2
    platform caam_sm: [0024] dd 90 c5 8b fc bb 9e 19
    platform caam_sm: [0032] 3f 84 8c 8c cc 4b e3 c1
    platform caam_sm: [0040] 81 5d 24 4d 09 46 bd 12
    platform caam_sm: [0048] 66 0b 44 c2 ec f4 a9 33
    platform caam_sm: [0056] 45 cc 63 5a a2 8e 40 9a
    platform caam_sm: [0064] 79 1f f8 a3 78 20 d3 3e
    platform caam_sm: [0072] 00 00 00 00 00 00 00 00
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: 256-bit black key in blob:
    platform caam_sm: [0000] 05 42 fc 73 92 7a 89 26
    platform caam_sm: [0008] 5c 94 ad a0 96 eb e6 f7
    platform caam_sm: [0016] 81 18 c3 33 54 57 26 7f
    platform caam_sm: [0024] a3 d6 e5 bb 2b c5 5e 5f
    platform caam_sm: [0032] 73 28 ce c9 86 10 ec 32
    platform caam_sm: [0040] 6a 6f a7 a9 9d 65 0a a5
    platform caam_sm: [0048] c4 72 41 6a 10 52 33 c1
    platform caam_sm: [0056] 36 d9 c7 c3 ca ba d8 e0
    platform caam_sm: [0064] ef 90 0c 43 f7 6d 4a 34
    platform caam_sm: [0072] 44 78 c2 f1 b1 9f 18 d5
    platform caam_sm: [0080] 00 00 00 00 00 00 00 00
    platform caam_sm: [0088] 00 00 00 00 00 00 00 00
    platform caam_sm: restored 64-bit black key:
    platform caam_sm: [0000] 92 ee cc 67 60 c8 a7 cc
    platform caam_sm: [0008] c2 f1 23 ad 05 97 46 82
    platform caam_sm: restored 128-bit black key:
    platform caam_sm: [0000] 80 f2 9e 49 e1 ad e4 20
    platform caam_sm: [0008] 79 4f 59 aa e2 c2 0e a3
    platform caam_sm: restored 192-bit black key:
    platform caam_sm: [0000] c6 d0 2d d2 0f 62 fa b9
    platform caam_sm: [0008] 90 69 72 16 04 77 70 d2
    platform caam_sm: [0016] ed a7 49 0a 0b 77 a7 11
    platform caam_sm: [0024] 8b ae 89 42 77 ee 37 47
    platform caam_sm: restored 256-bit black key:
    platform caam_sm: [0000] 07 fe 1e 38 6f 60 b5 ee
    platform caam_sm: [0008] 2a b1 b0 13 ce 69 d6 e5
    platform caam_sm: [0016] fc 26 5c d2 f2 5f cf 77
    platform caam_sm: [0024] cd 30 ed d4 c1 14 bc 76
    snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    wm8962 0-001a: customer id 0 revision D
    fsl-asrc 2034000.asrc: driver registered
    input: WM8962 Beep Generator as /devices/soc0/soc.0/2100000.aips-bus/21a0000.i2c/i2c-0/0-001a/input/input6
    imx-wm8962 sound.22: wm8962 <-> 202c000.ssi mapping ok
    imx-audio-hdmi sound-hdmi.23: hdmi-hifi <-> hdmi_audio.3 mapping ok
    NET: Registered protocol family 26
    TCP: cubic registered
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: BNEP filters: protocol multicast
    Bluetooth: BNEP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    8021q: 802.1Q VLAN Support v1.8
    Key type dns_resolver registered
    VGEN3: disabling
    VGEN2: disabling
    VGEN1: disabling
    SWBST: disabling
    SW4: disabling
    wm8962-supply: disabling
    usb_otg_vbus: disabling
    regulator-dummy: disabling
    imx mcc test is registered.
    input: gpio-keys.21 as /devices/soc0/gpio-keys.21/input/input9
    snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 2015-05-26 04:52:45 UTC (1432615965)
    ALSA device list:
      #0: wm8962-audio
      #1: imx-hdmi-soc
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (mmcblk2p2): using internal journal
    EXT3-fs (mmcblk2p2): recovery complete
    EXT3-fs (mmcblk2p2): mounted filesystem with ordered data mode
    VFS: Mounted root (ext3 filesystem) on device 179:2.
    devtmpfs: mounted
    Freeing unused kernel memory: 328K (80d13000 - 80d65000)
    
    INIT: version 2.88 booting
    
    Starting udev
    udevd[208]: starting version 182
    camera ov5640 is found
    camera ov5640_mipi is found
    random: nonblocking pool is initialized
    FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    bootlogd: cannot allocate pseudo tty: No such file or directory
    ALSA: Restoring mixer settings...
    Found hardware: "wm8962-audio" "" "" "" ""
    Hardware is initialized using a generic method
    No state is present for card imxhdmisoc
    Found hardware: "imx-hdmi-soc" "" "" "" ""
    Hardware is initialized using a generic method
    No state is present for card imxhdmisoc
    
    INIT: Entering runlevel: 5
    
    Configuring network interfaces... fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1)
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    done.
    Starting Xserver
    Starting system message bus: dbus.
    Starting Connection Manager
    Starting Dropbear SSH server: dropbear.
    Starting rpcbind daemon...done.
    starting statd: done
    Starting advanced power management daemon: No APM support in kernel
    (failed.)
    NFS daemon support not enabled in kernel
    Starting syslogd/klogd: done
     * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
    [A[74G[ ok ]
    Starting Telephony daemon
    Starting Linux NFC daemon
    Starting OProfileUI server
    Starting autohdmi: 
    Running local boot scripts (/etc/rc.local).
    
    
    Poky (Yocto Project Reference Distro) 1.7 imx6qsabresd /dev/ttymxc0
    
    
    
    imx6qsabresd login: imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
    imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform imx-hdmi-audio: -22
    PU: Power-off latency exceeded, new value 54333 ns
    
    
    Poky (Yocto Project Reference Distro) 1.7 imx6qsabresd /dev/ttymxc0
    
    
    
    imx6qsabresd login: ls
    Password: 
    Login incorrect
    
    imx6qsabresd login: root
    root@imx6qsabresd:~# uname -a
    Linux imx6qsabresd 3.14.28-1.0.0_ga+g91cf351 #1 SMP PREEMPT Mon May 25 17:25:16 CST 2015 armv7l GNU/Linux
  • 相关阅读:
    Waiting for table flush 的原因及处理方法【转】
    oracle启动过程【转】
    Zookeeper运维总结【转】
    nginx禁用3DES和DES弱加密算法,保证SSL证书安全【转】
    firewalld的基础操作命令【转】
    yum安装nginx报错解决nginx: [emerg] unknown directive “stream“ in /etc/nginx/nginx.conf问题【转】
    Zookeeper升级新版本步骤【转】
    MySQL查询导出数据Excel【转】
    MySQL启动报错[ERROR] InnoDB: Trying to access page number 4294967295 in space 0, space name innodb_system, which is outside the tablespace bounds. Byte offset 0, len 16384, i/o type read【转】
    MySQL备库复制延迟的原因及解决办法【转】
  • 原文地址:https://www.cnblogs.com/yechuang/p/4530683.html
Copyright © 2020-2023  润新知