freepbx 安装和配置

首先参见   asterisk manager api 的配置，然后根据freepbx的官方文档：

http://wiki.freepbx.org/display/HTGS/Installing+FreePBX+12+on+Ubuntu+Server+14.10

http://wiki.freepbx.org/display/L1/amportal+commands#amportalcommands-Chown

Initial System Setup

When installing the machine, at package selection make sure you pick - at least - OpenSSH Server, and LAMP Server. You may install others, if wanted.

Configure your root password.

sudo passwd root

Switch to the Root User

sudo -i

Update Your System

apt-get update && sudo apt-get upgrade -y 

Install Required Dependencies

apt-get install -y build-essential linux-headers-`uname -r` openssh-server apache2 mysql-server

  mysql-client bison flex php5 php5-curl php5-cli php5-mysql php-pear php-db php5-gd curl sox

  libncurses5-dev libssl-dev libmysqlclient-dev mpg123 libxml2-dev libnewt-dev sqlite3

  libsqlite3-dev pkg-config automake libtool autoconf git subversion unixodbc-dev uuid uuid-dev

  libasound2-dev libogg-dev libvorbis-dev libcurl4-openssl-dev libical-dev libneon27-dev libsrtp0-dev

  libspandsp-dev libiksemel-dev libiksemel-utils libiksemel3

 

Reboot server

This is to ensure you're running the kernel version that you're going to be building your kernel modules against. You may skip this step if you're sure your running kernel is the latest.

reboot

Install PearDB

pear uninstall db

pear install db-1.7.14

Install and Configure Asterisk

Download Asterisk source files.

cd /usr/src

wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz

git clone https://github.com/akheron/jansson.git

wget http://www.pjsip.org/release/2.2.1/pjproject-2.2.1.tar.bz2

Compile and install DAHDI and LibPRI

If you don't have any physical hardware you don't need to run these commands, however, it is still suggested to compile the modules, to allow you to add hardware later.

cd /usr/src

tar xvfz dahdi-linux-complete-current.tar.gz

tar xvfz libpri-1.4-current.tar.gz

rm -f dahdi-linux-complete-current.tar.gz libpri-1.4-current.tar.gz

cd dahdi-linux-complete-*

make all

make install

make config

cd /usr/src/libpri-1.4.*

make

make install

Compile and install pjproject

cd /usr/src

tar -xjvf pjproject-2.2.1.tar.bz2

cd pjproject-2.2.1

CFLAGS='-DPJ_HAS_IPV6=1' ./configure --prefix=/usr --enable-shared --disable-sound

  --disable-resample --disable-video --disable-opencore-amr

make dep

make

make install

Compile and Install jansson

cd /usr/src/jansson

autoreconf -i

./configure

make

make install

Compile and install Asterisk

cd /usr/src

tar xvfz asterisk-13-current.tar.gz

rm -f asterisk-13-current.tar.gz

cd asterisk-*

./configure

contrib/scripts/get_mp3_source.sh

make menuselect

You will be prompted at the point to pick which modules to build. Most of them will be enabled, but if you want to have MP3 support, you need to manually turn on 'format_mp3' on the first page.

After selecting 'Save & Exit' you can then continue

make

make install

make config

ldconfig

Install Asterisk-Extra-Sounds

Note that this installs the (8khz) 'wav' soundfiles and G722 (High Definition 'Wideband') audio.

mkdir -p /var/lib/asterisk/sounds

cd /var/lib/asterisk/sounds

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz

tar xfz asterisk-extra-sounds-en-wav-current.tar.gz

rm -f asterisk-extra-sounds-en-wav-current.tar.gz

# Wideband Audio download

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz

tar xfz asterisk-extra-sounds-en-g722-current.tar.gz

rm -f asterisk-extra-sounds-en-g722-current.tar.gz

Install and Configure FreePBX

Download and extract FreePBX.

wget http://mirror.freepbx.org/modules/packages/freepbx/freepbx-12.0-latest.tgz

tar vxfz freepbx-12-latest.tgz

Now create the Asterisk user and set ownership permissions.

useradd -m asterisk

chown asterisk. /var/run/asterisk

chown -R asterisk. /etc/asterisk

chown -R asterisk. /var/{lib,log,spool}/asterisk

chown -R asterisk. /usr/lib/asterisk

rm -rf /var/www/html

A few small modifications to Apache.

sed -i 's/(^upload_max_filesize = ).*/120M/' /etc/php5/apache2/php.ini

cp /etc/apache2/apache2.conf /etc/apache2/apache2.conf_orig

sed -i 's/^(User|Group).*/1 asterisk/' /etc/apache2/apache2.conf

service apache2 restart

Prepare MySQL

You now need to generate a secure password for FreePBX to use to talk to MySQL.

export ASTERISK_DB_PW=`dd if=/dev/urandom bs=1 count=32 2>/dev/null | base64 - | cut -c2-18`

That will generate a quasi-random 16 character long password, which should be secure enough for most things.  If you had set the MySQL 'root' password to be something when you were installing the machine, you will need to add a -pyourpassword flag to the following lines

Configure Asterisk database in MYSQL. 

mysqladmin -u root create asterisk

mysqladmin -u root create asteriskcdrdb

Set permissions on MYSQL database.

mysql -u root -e "GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"

mysql -u root -e "GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"

mysql -u root -e "flush privileges;"

Restart Asterisk and install FreePBX.

./start_asterisk start

./install_amp --installdb --username=asteriskuser --password=${ASTERISK_DB_PW}

amportal chown

amportal a ma installall

amportal a reload

amportal a ma refreshsignatures

amportal chown

Finally, one last mod and start FreePBX.

ln -s /var/lib/asterisk/moh /var/lib/asterisk/mohmp3

amportal restart

Start FreePBX

Navigate: 

Now FreePBX is installed, it will be available via Apache. Open up your web browser and visit:

    http://Address.Of.FreePBX.Server/admin