• Ubuntu无线网络问题


    Version:Ubuntu 16.10

    Computer: Acer ASPIRE 4750G

    Wireless adapter: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev01)

    问题描述:重启或者重新安装系统后,检测不到Wi-Fi。具体表现为右上角Wi-Fi网络连接的图标是空的,没有半圈半圈的线。点击能够启动联网和启动Wi-Fi,但是就是检测不到任何的Wi-Fi。

    问题分析:在终端输入 sudo lshw -C network ,提示无线网络不可用,得到的结果类似于:

    *-network DISABLED
       description: Wireless interface
       product: AR9287 Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications INc.
       physical id: 0
       bus info: pci@0000:06:00.0
       logical name: wlan0
       version: 01
       serial: the-number
        64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list enternet physical wireless
       configureation: broadcast=yes driver=ath9k driverversion=2.6.38-8-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       resources: irq: 17 memory:d0200000-d020ffff

    解决方法:

    Try blacklisting the  acer-wmi  kernel module.

     sudo gedit /etc/modprobe.d/blacklist.conf 

    add  blacklist acer_wmi  as a new line at the bottom of this file.

    Then reboot.

    原理:

    edit:

    The acer-wmi kernel module enables you to control the following:

      • the wireless LAN card radio
      • inbuilt Bluetooth adapter
      • inbuilt 3G card
      • mail LED of your laptop
      • brightness of the LCD panel

    With regards to wireless, all  acer-wmi  does is enable the radio on the card. It is not responsible for the wireless LED - once the radio is enabled, this is down to the wireless driver for your card.

    However for some acer laptop models - there is a conflict between the Acer firmware and the kernel implementation. This is why you need to blacklist.

    参考: Wubi install cannot see/connect to any wifi?

    一些网络调试的命令和方法,参考自无法联接无线网(已解决!)

    uname -a
    
    lspci
    
    sudo lspci -vvnn
    
    sudo lshw -C network
    
    iwconfig //查看网络配置文件
    
    dig www.baidu.com
    
    sudo iwlist scanning //扫描电脑周边所有可看到的无线网络
    
    ls -l /etc/NetworkManager/system-connections //查看已有的无线网络的配置文件
  • 相关阅读:
    vs2015驱动开发中使用RtlStringCchPrintfW()报错
    windbg双机调试配置
    修改Windows默认调试器
    kong配置service和route实现简单API代理
    konga的初步使用
    Kong Admin API — 核心对象
    Kong的API管理方式
    kong的管理UI选择-konga
    Kong 安装
    关于kong | API Gateway
  • 原文地址:https://www.cnblogs.com/puran/p/6067329.html
Copyright © 2020-2023  润新知