Suppose that you are given the following simple database table called Employee that has 2 columns named Employee ID and Salary:
| Employee ID | Salary |
| 3 | 200 |
| 4 | 800 |
| 7 | 450 |
Write a SQL query to get the second highest salary from the table above. Also write a query to find the nth highest salary in SQL, where n can be any number.
The easiest way to start with a problem like this is to ask yourself a simpler question first. So, let’s ask ourselves how can we find the highest salary in a table? Well, you probably know that is actually really easy – we can just use the MAX aggregate function:
select MAX(Salary) from Employee;
Remember that SQL is based on set theory
You should remember that SQL uses sets as the foundation for most of its queries. So, the question is how can we use set theory to find the 2nd highest salary in the table above? Think about it on your own for a bit – even if you do not remember much about sets, the answer is very easy to understand and something that you might be able to come up with on your own.
Figuring out the answer to find the 2nd highest salary
What if we try to exclude the highest salary value from the result set returned by the SQL that we run? If we remove the highest salary from a group of salary values, then we will have a new group of values whose highest salary is actually the 2nd highest in the original Employee table.
So, if we can somehow select the highest value from a result set that excludes the highest value, then we would actually be selecting the 2nd highest salary value. Think about that carefully and see if you can come up with the actual SQL yourself before you read the answer that we provide below. Here is a small hint to help you get started: you will have to use the “NOT IN” SQL operator.
Solution to finding the 2nd highest salary in SQL
Now, here is what the SQL will look like:
SELECT MAX(Salary) FROM Employee WHERE Salary NOT IN (SELECT MAX(Salary) FROM Employee )
Running the SQL above would return us “450″, which is of course the 2nd highest salary in the Employee table.
Subscribe to our newsletter for more free interview questions.
An explanation of the solution
The SQL above first finds the highest salary value in the Employee table using “(select MAX(Salary) from Employee)”. Then, adding the “WHERE Salary NOT IN” in front basically creates a new set of Salary values that does not include the highest Salary value. For instance, if the highest salary in the Employee table is 200,000 then that value will be excluded from the results using the “NOT IN” operator, and all values except for 200,000 will be retained in the results.
This now means that the highest value in this new result set will actually be the 2nd highest value in the Employee table. So, we then select the max Salary from the new result set, and that gives us 2nd highest Salary in the Employee table. And that is how the query above works.
An alternative solution using the not equals SQL operator
We can actually use the not equals operator – the “<>” – instead of the NOT IN operator as an alternative solution to this problem. This is what the SQL would look like:
select MAX(Salary) from Employee WHERE Salary <> (select MAX(Salary) from Employee )
How would you write a SQL query to find the Nth highest salary?
What we did above was write a query to find the 2nd highest Salary value in the Employee table. But, another commonly asked interview question is how can we use SQL to find the Nth highest salary, where N can be any number whether it’s the 3rd highest, 4th highest, 5th highest, 10th highest, etc? This is also an interesting question – try to come up with an answer yourself before reading the one below to see what you come up with.
大意：上边我们已经写了从表Employee中查找第二高薪水的查询了，然而面试中更普遍的问题是查找第N高的薪水。
The answer and explanation to finding the nth highest salary in SQL
Here we will present one possible answer to finding the nth highest salary first, and the explanation of that answer after since it’s actually easier to understand that way. Note that the first answer we present is actually not optimal from a performance standpoint since it uses a subquery, but we think that it will be interesting for you to learn about because you might just learn something new about SQL. If you want to see the more optimal solutions first, you can skip down to the sections that says “Find the nth highest salary without a subquery” instead.
大意：下面我们先给出一个可行解，然后再解释为什么。注意，这个解由于使用了子查询，所以，从性能角度来看，它可能不是最优解。但是，这将是有趣的，因为你会学到一些有关SQL的新知识（correlated subquery ：大概是相关子查询）。如果想直接看更优秀的方法，可以直接看下一节Find the nth highest salary without a subquery。
The SQL below will give you the correct answer – but you will have to plug in an actual value for N of course. This SQL to find the Nth highest salary should work in SQL Server, MySQL, DB2, Oracle, Teradata, and almost any other RDBMS:
大意：下面就是正确答案，但是需要用确定的值来替换N。
SELECT * /*This is the outer query part */ FROM Employee Emp1 WHERE (N-1) = ( /* Subquery starts here */ SELECT COUNT(DISTINCT(Emp2.Salary)) FROM Employee Emp2 WHERE Emp2.Salary > Emp1.Salary)
How does the query above work?
The query above can be quite confusing if you have not seen anything like it before – pay special attention to the fact that “Emp1″ appears in both the subquery (also known as an inner query) and the “outer” query. The outer query is just the part of the query that is not the subquery/inner query – both parts of the query are clearly labeled in the comments.
大意：如果以前没见过类似的查询，你可能会感到很疑惑，注意，Emp1在子查询和外部查询都出现了。
The subquery is a correlated subquery
The subquery in the SQL above is actually a specific type of subquery known as a correlated subquery. The reason it is called a correlated subquery is because the the subquery uses a value from the outer query in it’s WHERE clause. In this case that value is the Emp1 table alias as we pointed out earlier. A normal subquery can be run independently of the outer query, but a correlated subquery can NOT be run independently of the outer query. If you want to read more about the differences between correlated and uncorrelated subqueries you can go here: Correlated vs Uncorrelated Subqueries.
大意：上边的SQL语句中的子查询是子查询的一种特殊类型，叫做相关子查询。它被叫做相关子查询，是因为子查询的where条件中使用了外部查询的值.在这个SQL语句中，这个值是Emp1，它是外部指定一个表的别名。一般的子查询可以独立的执行，但是相关子查询不行，详细了解请点击上面的连接。
The most important thing to understand in the query above is that the subquery is evaluated each and every time a row is processed by the outer query. In other words, the inner query can not be processed independently of the outer query since the inner query uses the Emp1 value as well.
大意：要理解上面的查询，首先要明确，当外部查询某一行时，子查询就会执行，每一行都是如此。换句话说就是，子查询不能被单独处理，因为它要用到外部查询的值。（接着看下去就会明白）
Finding nth highest salary example and explanation
Let’s step through an actual example to see how the query above will actually execute step by step. Suppose we are looking for the 2nd highest Salary value in our table above, so our N is 2. This means that the query will look like this:
大意：让我们通过一个明确的例子来看看这个查询实际上是怎样一步步执行的。假设我们在查询第二高薪水，那么，SQL语句就会变成这样：
SELECT * FROM Employee Emp1 WHERE (1) = ( SELECT COUNT(DISTINCT(Emp2.Salary)) FROM Employee Emp2 WHERE Emp2.Salary > Emp1.Salary)
You can probably see that Emp1 and Emp2 are just aliases for the same Employee table – it’s like we just created 2 separate clones of the Employee table and gave them different names.
大意：Emp1和Emp2都是同一个表Employee的别名，就像创建了Employee的两个独立的副本一样。
Understanding and visualizing how the query above works
Let’s assume that we are using this data:
| Employee ID | Salary |
| 3 | 200 |
| 4 | 800 |
| 7 | 450 |
For the sake of our explanation, let’s assume that N is 2 – so the query is trying to find the 2nd highest salary in the Employee table. The first thing that the query above does is process the very first row of the Employee table, which has an alias of Emp1.
大意：假设是在查Employee表中第二高薪水。上述查询要做的第一件事就是处理别名为Emp1的表的第一行数据。
The salary in the first row of the Employee table is 200. Because the subquery is correlated to the outer query through the alias Emp1, it means that when the first row is processed, the query will essentially look like this – note that all we did is replace Emp1.Salary with the value of 200:
大意：第一行数据中的salary是200.由于子查询通过Emp1而依赖于外部查询，所以当外部查询的第一行被处理时，这个查询就变成了下面这样，将Emp1.Salary变为200：
SELECT * FROM Employee Emp1 WHERE (1) = ( SELECT COUNT(DISTINCT(Emp2.Salary)) FROM Employee Emp2 WHERE Emp2.Salary > 200)
So, what exactly is happening when that first row is processed? Well, if you pay special attention to the subquery you will notice that it’s basically searching for the count of salary entries in the Employee table that are greater than 200. Basically, the subquery is trying to find how many salary entries are greater than 200. Then, that count of salary entries is checked to see if it equals 1 in the outer query, and if so then everything from that particular row in Emp1 will be returned. Note that Emp1 and Emp2 are both aliases for the same table – Employee. Emp2 is only being used in the subquery to compare all the salary values to the current salary value chosen in Emp1. This allows us to find the number of salary entries (the count) that are greater than 200. And if this number is equal to N-1 (which is 1 in our case) then we know that we have a winner – and that we have found our answer.
大意：所以，当外部查询的第一行数据被处理时发生了什么？子查询只判断Emp2.Salary是否大于200，并且将大于200的数量返回。然后外部查询再判断子查询返回的值是否等于N-1（这里是1），如果相等，那么就找到第N高的薪水了。
But, it’s clear that the subquery will return a 2 when Emp1.Salary is 200, because there are clearly 2 salaries greater than 200 in the Employee table. And since 2 is not equal to 1, the salary of 200 will clearly not be returned.
大意：当然，很明显这里不是正确答案，还会继续查询。
So, what happens next? Well, the SQL processor will move on to the next row which is 800, and the resulting query looks like this:
大意：所以，SQL处理器会继续处理下一行数据，查询会再次变成下面这样：
SELECT * FROM Employee Emp1 WHERE (1) = ( SELECT COUNT(DISTINCT(Emp2.Salary)) FROM Employee Emp2 WHERE Emp2.Salary > 800)
Since there are no salaries greater than 800, the query will move on to the last row and will of course find the answer as 450. This is because 800 is greater than 450, and the count will be 1. More precisely, the entire row with the desired salary would be returned, and this is what it would look like:
大意：当查询到450时，满足条件，返回值如下：
| EmployeeID | Salary |
| 7 | 450 |
It’s also worth pointing out that the reason DISTINCT is used in the query above is because there may be duplicate salary values in the table. In that scenario, we only want to count repeated salaries just once, which is exactly why we use the DISTINCT operator.
大意：这里之所以使用DISTINCT关键字，是因为表中的salary有可能会有相同的值，这种情况下要只判断一次相同值。
下面给出一个leetcode上的类似解，个人觉得更好一些：
SELECT e1.Salary
FROM (SELECT DISTINCT Salary FROM Employee) e1
WHERE (SELECT COUNT(*) FROM (SELECT DISTINCT Salary FROM Employee) e2 WHERE e2.Salary > e1.Salary) = N - 1
LIMIT 1 （这里使用limit我不理解，我觉得没必要，去掉后leetcode还是Acceped，下面没看就不翻译了）
A high level summary of how the query works
Let’s go through a high level summary of how someone would have come up with the SQL in the first place – since we showed you the answer first without really going through the thought process one would use to arrive at that answer.
Think of it this way – we are looking for a pattern that will lead us to the answer. One way to look at it is that the 2nd highest salary would have just one salary that is greater than it. The 4th highest salary would have 3 salaries that are greater than it. In more general terms, in order to find the Nth highest salary, we just find the salary that has exactly N-1 salaries greater than itself. And that is exactly what the query above accomplishes – it simply finds the salary that has N-1 salaries greater than itself and returns that value as the answer.
Find the nth highest salary using the TOP keyword in SQL Server
We can also use the TOP keyword (for databases that support the TOP keyword, like SQL Server) to find the nth highest salary. Here is some fairly simply SQL that would help us do that:
SELECT TOP 1 Salary
FROM (
SELECT DISTINCT TOP N Salary
FROM Employee
ORDER BY Salary DESC
) AS Emp
ORDER BY Salary
To understand the query above, first look at the subquery, which simply finds the N highest salaries in the Employee table and arranges them in descending order. Then, the outer query will actually rearrange those values in ascending order, which is what the very last line “ORDER BY Salary” does, because of the fact that the ORDER BY Default is to sort values in ASCENDING order. Finally, that means the Nth highest salary will be at the top of the list of salaries, which means we just want the first row, which is exactly what “SELECT TOP 1 Salary” will do for us!
Find the nth highest salary without using the TOP keyword
There are many other solutions to finding the nth highest salary that do not need to use the TOP keyword, one of which we already went over. Keep reading for more solutions.
Find the nth highest salary in SQL without a subquery
The solution we gave above actually does not do well from a performance standpoint. This is because the use of the subquery can really slow down the query. With that in mind, let’s go through some different solutions to this problem for different database vendors. Because each database vendor (whether it’s MySQL, Oracle, or SQL Server) has a different SQL syntax and functions, we will go through solutions for specific vendors. But keep in mind that the solution presented above using a subquery should work across different database vendors.
Find the nth highest salary in MySQL
In MySQL, we can just use the LIMIT clause along with an offset to find the nth highest salary. If that doesn’t make sense take a look at the MySQL-specific SQL to see how we can do this:
SELECT Salary FROM Employee ORDER BY Salary DESC LIMIT n-1,1
Note that the DESC used in the query above simply arranges the salaries in descending order – so from highest salary to lowest. Then, the key part of the query to pay attention to is the “LIMIT N-1, 1″. The LIMIT clause takes two arguments in that query – the first argument specifies the offset of the first row to return, and the second specifies the maximum number of rows to return. So, it’s saying that the offset of the first row to return should be N-1, and the max number of rows to return is 1. What exactly is the offset? Well, the offset is just a numerical value that represents the number of rows from the very first row, and since the rows are arranged in descending order we know that the row at an offset of N-1 will contain the (N-1)th highest salary.
Find the nth highest salary in SQL Server
In SQL Server, there is no such thing as a LIMIT clause. But, we can still use the offset to find the nth highest salary without using a subquery – just like the solution we gave above in MySQL syntax. But, the SQL Server syntax will be a bit different. Here is what it would look like:
SELECT Salary FROM Employee ORDER BY Salary DESC OFFSET N-1 ROW(S) FETCH FIRST ROW ONLY
Note that I haven’t personally tested the SQL above, and I believe that it will only work in SQL Server 2012 and up. Let me know in the comments if you notice anything else about the query.
Find the nth highest salary in Oracle using rownum
Oracle syntax doesn’t support using an offset like MySQL and SQL Server, but we can actually use the row_number analytic function in Oracle to solve this problem. Here is what the Oracle-specific SQL would look like to find the nth highest salary:
select * from ( select Emp.*, row_number() over (order by Salary DESC) rownumb from Employee Emp ) where rownumb = n; /*n is nth highest salary*/
The first thing you should notice in the query above is that inside the subquery the salaries are arranged in descending order. Then, the row_number analytic function is applied against the list of descending salaries. Applying the row_number function against the list of descending salaries means that each row will be assigned a row number starting from 1. And since the rows are arranged in descending order the row with the highest salary will have a 1 for the row number. Note that the row number is given the alias rownumb in the SQL above.
This means that in order to find the 3rd or 4th highest salary we simply look for the 3rd or 4th row. The query above will then compare the rownumb to n, and if they are equal will return everything in that row. And that will be our answer!
Find the nth highest salary in Oracle using RANK
Oracle also provides a RANK function that just assigns a ranking numeric value (with 1 being the highest) for some sorted values. So, we can use this SQL in Oracle to find the nth highest salary using the RANK function:
select * FROM ( select EmployeeID, Salary ,rank() over (order by Salary DESC) ranking from Employee ) WHERE ranking = N;
The rank function will assign a ranking to each row starting from 1. This query is actually quite similar to the one where we used the row_number() analytic function, and works in the same way as well.
We’ve now gone through many different solutions in different database vendors like Oracle, MySQL, and SQL Server. Hopefully now you understand how to solve a problem like this, and you have improved your SQL skills in the process! Be sure to leave a comment if you have any questions or observations.
来源：http://www.programmerinterview.com/index.php/database-sql/find-nth-highest-salary-sql/