• bell gx260


    frontpanel 的针序

    Dell certainly doesn't make it easy to upgrade their computers.

    I did find a partial pinout description that might help you:
    here's a diagram of the connector on the motherboard:

    33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
    o o o o o o x o o o o o o o o o o
    o o o o o o o o o o o o o o o o o
    34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2

    The 34-pin ribbon cable runs to a small sub-board for the front panel, which includes a 16-pin(2x8) header which gets another ribbon cable that goes to the "sub-sub-baord" for the actual poanel light and switches.

    The table below shows the functions of the pins on the 34-pin connector, plus where they connect to on the 16-pin "sub-board" header.

    34-Pin function 16-Pin
    1 GND 3, 7, 15, 16
    2 ?
    3 ?
    4 ?
    5 ?
    6 ?
    7 ?
    8 ?
    9 GND
    10 ? 11
    11 GND
    12 ?
    13 ?
    14 GND
    15 ?
    16 GND
    17 ?
    18 ?
    19 GND
    20 Pwr Switch 2
    21 “KEY”
    22 HD LED 4
    23 PWR LED - 5
    24 ? 13
    25 GND
    26 ?
    27 PWR LED + 9
    28 ? 8
    29 GND
    30 GND
    31 ?
    32 GND
    33 ?
    34 ?
    用400元买了一个gx260的pc裸机,不配显示器
    拆了玩玩
    机箱小, 散热不是很好
    拆了, 准备不要不用前端的usb接口,音频输出, 电源指示灯, 硬盘指示灯, 启动开关,小外响,机箱是否盖好的检测器,等
    想直接启动cpu
    在网上找了一下及尝试了一下 短接一下 19-20针可以启动机器, 凑合着使吧
  • 相关阅读:
    rabiitmq 消息丢失处理
    后端返回文件流和json格式的方式进行文件下载导出
    elasticsearch 安装
    docker-compose 命令
    艾孜尔江的部分影视作品
    游戏作品:万里同风
    Unity设置计时器
    Unity项目中VS Code部分功能出现问题解决思路
    Unity接收FFmpeg的UDP推流
    SVN Basics
  • 原文地址:https://www.cnblogs.com/kwingmei/p/3660280.html
Copyright © 2020-2023  润新知