CTreeCtrl和CListCtrl失去焦点时高亮选中项

设置CTreeCtrl的Always Show Selection:True
CListCtrl的Always Show Selection:False
在NM_CUSTOMDRAW事件中添加如下代码：

void CHighLightDlg::OnNMCustomdrawTree1(NMHDR *pNMHDR, LRESULT *pResult)
{
    LPNMCUSTOMDRAW pNMCD = reinterpret_cast<LPNMCUSTOMDRAW>(pNMHDR);
    // TODO: 在此添加控件通知处理程序代码
    *pResult = 0;

    LPNMTVCUSTOMDRAW pDraw=(LPNMTVCUSTOMDRAW)pNMHDR;
    DWORD dwDrawStage=pDraw->nmcd.dwDrawStage;
    UINT uItemState =pDraw->nmcd.uItemState;
    //
    *pResult=CDRF_NOTIFYITEMDRAW;
    //|CDRF_NOTIFYPOSTPAINT|CDRF_NOTIFYSUBITEMDRAW|CDRF_NOTIFYPOSTERASE;
    CDC* pdc=CDC::FromHandle(pDraw->nmcd.hdc);
    CRect rc;
    HTREEITEM hItem=(HTREEITEM) pDraw->nmcd.dwItemSpec;
    m_tree.GetItemRect(hItem,&rc,TRUE);//FALSE);text only
    CString txt=m_tree.GetItemText(hItem);
    if((dwDrawStage & CDDS_ITEM) && (uItemState & CDIS_SELECTED))
    {//
        pdc->FillSolidRect(&rc,RGB(49,106,197));//clr);
        //
        pdc->SetTextColor(RGB(255,255,255));//white
        pdc->SetBkColor(RGB(49,106,197));//clr);
        //

        CFont* pfnt=pdc->GetCurrentFont();
        //
        pdc->TextOut(rc.left+2,rc.top+2,txt);
        pdc->SelectObject(pfnt);

        *pResult |= CDRF_SKIPDEFAULT;
        // afxDump << "1 ";
    }
    else // without these ,1st blue !
    {
        pdc->FillSolidRect(&rc, GetSysColor(COLOR_WINDOW));
        pdc->SetTextColor(GetSysColor(COLOR_WINDOWTEXT));
        pdc->TextOut(rc.left+2, rc.top+2, txt);
        // afxDump << "2 ";
    }
}

void CHighLightDlg::OnNMCustomdrawList2(NMHDR *pNMHDR, LRESULT *pResult)
{
    LPNMCUSTOMDRAW pNMCD = reinterpret_cast<LPNMCUSTOMDRAW>(pNMHDR);
    // TODO: 在此添加控件通知处理程序代码
    *pResult = 0;

    //This code based on Michael Dunn's excellent article on
    //list control custom draw at http://www.codeproject.com/listctrl/lvcustomdraw.asp

    NMLVCUSTOMDRAW* pLVCD = reinterpret_cast<NMLVCUSTOMDRAW*>( pNMHDR );

    // Take the default processing unless we set this to something else below.
    *pResult = CDRF_DODEFAULT;
    // First thing - check the draw stage. If it's the control's prepaint
    // stage, then tell Windows we want messages for every item.
    if ( CDDS_PREPAINT == pLVCD->nmcd.dwDrawStage )
    {
        *pResult = CDRF_NOTIFYITEMDRAW;
    }
    else if ( CDDS_ITEMPREPAINT == pLVCD->nmcd.dwDrawStage )
    {
        // This is the notification message for an item.  We'll request
        // notifications before each subitem's prepaint stage.

        *pResult = CDRF_NOTIFYSUBITEMDRAW;
    }
    else if ( (CDDS_ITEMPREPAINT | CDDS_SUBITEM) == pLVCD->nmcd.dwDrawStage )
    {

        COLORREF clrNewTextColor, clrNewBkColor;

        int    nItem = static_cast<int>( pLVCD->nmcd.dwItemSpec );

        BOOL bSelect = FALSE;
        POSITION pos =m_lst.GetFirstSelectedItemPosition();
        while(pos)
        {
            int index = m_lst.GetNextSelectedItem(pos);
            if(index==nItem)
            {
                bSelect = TRUE;
                break;
            }
        }
        if(bSelect)
        {
            //clrNewTextColor = RGB(255,0,0);     //Set the text to red
            clrNewTextColor = RGB(0,255,0);     //Set the text to red
            clrNewBkColor = RGB(0,0,255);     //Set the bkgrnd color to blue
        }
        else
        {
            clrNewTextColor = RGB(0,0,0);     //Leave the text black
            clrNewBkColor = RGB(255,255,255);    //leave the bkgrnd color white
        }

        pLVCD->clrText = clrNewTextColor;
        pLVCD->clrTextBk = clrNewBkColor;

        // Tell Windows to paint the control itself.
        *pResult = CDRF_DODEFAULT;

    }
}

这个最近比较常用，记录一下。
需要源码的留下邮箱。
url:http://greatverve.cnblogs.com/p/ctreectrl-clistctrl-highlight.html

以下未经说明，listctrl默认view 风格为report

1. CListCtrl 风格

      LVS_ICON: 为每个item显示大图标
      LVS_SMALLICON: 为每个item显示小图标
      LVS_LIST: 显示一列带有小图标的item
      LVS_REPORT: 显示item详细资料

直观的理解：windows资源管理器，“查看”标签下的“大图标，小图标，列表，详细资料”

2. 设置listctrl 风格及扩展风格

      LONG lStyle;
      lStyle = GetWindowLong(m_list.m_hWnd, GWL_STYLE);//获取当前窗口style
      lStyle &= ~LVS_TYPEMASK; //清除显示方式位
      lStyle |= LVS_REPORT; //设置style
      SetWindowLong(m_list.m_hWnd, GWL_STYLE, lStyle);//设置style

      DWORD dwStyle = m_list.GetExtendedStyle();
      dwStyle |= LVS_EX_FULLROWSELECT;//选中某行使整行高亮（只适用与report风格的listctrl）
      dwStyle |= LVS_EX_GRIDLINES;//网格线（只适用与report风格的listctrl）
      dwStyle |= LVS_EX_CHECKBOXES;//item前生成checkbox控件
      m_list.SetExtendedStyle(dwStyle); //设置扩展风格

      注：listview的style请查阅msdn
      http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wceshellui5/html/wce50lrflistviewstyles.asp

3. 插入数据

      m_list.InsertColumn( 0, "ID", LVCFMT_LEFT, 40 );//插入列
      m_list.InsertColumn( 1, "NAME", LVCFMT_LEFT, 50 );
      int nRow = m_list.InsertItem(0, “11”);//插入行
      m_list.SetItemText(nRow, 1, “jacky”);//设置数据

4. 一直选中item

选中style中的Show selection always，或者在上面第2点中设置LVS_SHOWSELALWAYS

5. 选中和取消选中一行

    int nIndex = 0;
    //选中
    m_list.SetItemState(nIndex, LVIS_SELECTED|LVIS_FOCUSED, LVIS_SELECTED|LVIS_FOCUSED);
    //取消选中
    m_list.SetItemState(nIndex, 0, LVIS_SELECTED|LVIS_FOCUSED);

6. 得到listctrl中所有行的checkbox的状态

      m_list.SetExtendedStyle(LVS_EX_CHECKBOXES);
      CString str;
      for(int i=0; i<m_list.GetItemCount(); i++)
      {
           if( m_list.GetItemState(i, LVIS_SELECTED) == LVIS_SELECTED || m_list.GetCheck(i))
           {
                str.Format(_T("第%d行的checkbox为选中状态"), i);
                AfxMessageBox(str);
           }
      }

7. 得到listctrl中所有选中行的序号

      方法一：
      CString str;
      for(int i=0; i<m_list.GetItemCount(); i++)
      {
           if( m_list.GetItemState(i, LVIS_SELECTED) == LVIS_SELECTED )
           {
                str.Format(_T("选中了第%d行"), i);
                AfxMessageBox(str);
           }
      }

      方法二：
      POSITION pos = m_list.GetFirstSelectedItemPosition();
      if (pos == NULL)
           TRACE0("No items were selected! ");
      else
      {
           while (pos)
           {
                int nItem = m_list.GetNextSelectedItem(pos);
                TRACE1("Item %d was selected! ", nItem);
                // you could do your own processing on nItem here
           }
      }

8. 得到item的信息

      TCHAR szBuf[1024];
      LVITEM lvi;
      lvi.iItem = nItemIndex;
      lvi.iSubItem = 0;
      lvi.mask = LVIF_TEXT;
      lvi.pszText = szBuf;
      lvi.cchTextMax = 1024;
      m_list.GetItem(&lvi);

      关于得到设置item的状态，还可以参考msdn文章
      Q173242: Use Masks to Set/Get Item States in CListCtrl
               http://support.microsoft.com/kb/173242/en-us

9. 得到listctrl的所有列的header字符串内容

      LVCOLUMN lvcol;
      char str[256];
      int   nColNum;
      CString strColumnName[4];//假如有4列

      nColNum = 0;
      lvcol.mask = LVCF_TEXT;
      lvcol.pszText = str;
      lvcol.cchTextMax = 256;
      while(m_list.GetColumn(nColNum, &lvcol))
      {
           strColumnName[nColNum] = lvcol.pszText;
           nColNum++;
      }

10. 使listctrl中一项可见，即滚动滚动条

m_list.EnsureVisible(i, FALSE);

11. 得到listctrl列数

int nHeadNum = m_list.GetHeaderCtrl()->GetItemCount();

12. 删除所有列

    方法一：
         while ( m_list.DeleteColumn (0))
       因为你删除了第一列后，后面的列会依次向上移动。

    方法二：
      int nColumns = 4;
      for (int i=nColumns-1; i>=0; i--)
          m_list.DeleteColumn (i);

13. 得到单击的listctrl的行列号

      添加listctrl控件的NM_CLICK消息相应函数
      void CTest6Dlg::OnClickList1(NMHDR* pNMHDR, LRESULT* pResult)
      {
           // 方法一：
           /*
           DWORD dwPos = GetMessagePos();
           CPoint point( LOWORD(dwPos), HIWORD(dwPos) );

           m_list.ScreenToClient(&point);

           LVHITTESTINFO lvinfo;
           lvinfo.pt = point;
           lvinfo.flags = LVHT_ABOVE;

           int nItem = m_list.SubItemHitTest(&lvinfo);
           if(nItem != -1)
           {
                CString strtemp;
                strtemp.Format("单击的是第%d行第%d列", lvinfo.iItem, lvinfo.iSubItem);
                AfxMessageBox(strtemp);
           }
          */

          // 方法二:
          /*
           NM_LISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;
           if(pNMListView->iItem != -1)
           {
                CString strtemp;
                strtemp.Format("单击的是第%d行第%d列",
                                pNMListView->iItem, pNMListView->iSubItem);
                AfxMessageBox(strtemp);
           }
          */
           *pResult = 0;
      }

14. 判断是否点击在listctrl的checkbox上

      添加listctrl控件的NM_CLICK消息相应函数
      void CTest6Dlg::OnClickList1(NMHDR* pNMHDR, LRESULT* pResult)
      {
           DWORD dwPos = GetMessagePos();
           CPoint point( LOWORD(dwPos), HIWORD(dwPos) );

           m_list.ScreenToClient(&point);

           LVHITTESTINFO lvinfo;
           lvinfo.pt = point;
           lvinfo.flags = LVHT_ABOVE;

           UINT nFlag;
           int nItem = m_list.HitTest(point, &nFlag);
           //判断是否点在checkbox上
           if(nFlag == LVHT_ONITEMSTATEICON)
           {
                AfxMessageBox("点在listctrl的checkbox上");
           }
           *pResult = 0;
      }

15. 右键点击listctrl的item弹出菜单

      添加listctrl控件的NM_RCLICK消息相应函数
      void CTest6Dlg::OnRclickList1(NMHDR* pNMHDR, LRESULT* pResult)
      {
           NM_LISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;
           if(pNMListView->iItem != -1)
           {
                DWORD dwPos = GetMessagePos();
                CPoint point( LOWORD(dwPos), HIWORD(dwPos) );

                CMenu menu;
                VERIFY( menu.LoadMenu( IDR_MENU1 ) );
                CMenu* popup = menu.GetSubMenu(0);
                ASSERT( popup != NULL );
                popup->TrackPopupMenu(TPM_LEFTALIGN | TPM_RIGHTBUTTON, point.x, point.y, this );
           }
           *pResult = 0;
}

16. item切换焦点时(包括用键盘和鼠标切换item时)，状态的一些变化顺序

      添加listctrl控件的LVN_ITEMCHANGED消息相应函数
      void CTest6Dlg::OnItemchangedList1(NMHDR* pNMHDR, LRESULT* pResult)
      {
           NM_LISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;
           // TODO: Add your control notification handler code here

           CString sTemp;

           if((pNMListView->uOldState & LVIS_FOCUSED) == LVIS_FOCUSED &&
            (pNMListView->uNewState & LVIS_FOCUSED) == 0)
           {
                sTemp.Format("%d losted focus",pNMListView->iItem);
           }
           else if((pNMListView->uOldState & LVIS_FOCUSED) == 0 &&
               (pNMListView->uNewState & LVIS_FOCUSED) == LVIS_FOCUSED)
           {
                sTemp.Format("%d got focus",pNMListView->iItem);
           }

           if((pNMListView->uOldState & LVIS_SELECTED) == LVIS_SELECTED &&
            (pNMListView->uNewState & LVIS_SELECTED) == 0)
           {
                sTemp.Format("%d losted selected",pNMListView->iItem);
           }
           else if((pNMListView->uOldState & LVIS_SELECTED) == 0 &&
            (pNMListView->uNewState & LVIS_SELECTED) == LVIS_SELECTED)
           {
                sTemp.Format("%d got selected",pNMListView->iItem);
           }

           *pResult = 0;
      }

17. 得到另一个进程里的listctrl控件的item内容

http://www.codeproject.com/threads/int64_memsteal.asp

18. 选中listview中的item

Q131284: How To Select a Listview Item Programmatically
http://support.microsoft.com/kb/131284/en-us

19. 如何在CListView中使用CListCtrl的派生类

http://www.codeguru.com/cpp/controls/listview/introduction/article.php/c919/

20. listctrl的subitem添加图标

m_list.SetExtendedStyle(LVS_EX_SUBITEMIMAGES);
m_list.SetItem(..); //具体参数请参考msdn

21. 在CListCtrl显示文件，并根据文件类型来显示图标

      网上找到的代码，share
      BOOL CTest6Dlg::OnInitDialog()
      {
           CDialog::OnInitDialog();

           HIMAGELIST himlSmall;
           HIMAGELIST himlLarge;
           SHFILEINFO sfi;
           char cSysDir[MAX_PATH];
           CString strBuf;

           memset(cSysDir, 0, MAX_PATH);

           GetWindowsDirectory(cSysDir, MAX_PATH);
           strBuf = cSysDir;
           sprintf(cSysDir, "%s", strBuf.Left(strBuf.Find("\")+1));

           himlSmall = (HIMAGELIST)SHGetFileInfo ((LPCSTR)cSysDir,
                      0,
                      &sfi,
                      sizeof(SHFILEINFO),
                      SHGFI_SYSICONINDEX | SHGFI_SMALLICON );

           himlLarge = (HIMAGELIST)SHGetFileInfo((LPCSTR)cSysDir,
                      0,
                      &sfi,
                      sizeof(SHFILEINFO),
                      SHGFI_SYSICONINDEX | SHGFI_LARGEICON);

           if (himlSmall && himlLarge)
           {
                ::SendMessage(m_list.m_hWnd, LVM_SETIMAGELIST,
                             (WPARAM)LVSIL_SMALL, (LPARAM)himlSmall);
                ::SendMessage(m_list.m_hWnd, LVM_SETIMAGELIST,
                             (WPARAM)LVSIL_NORMAL, (LPARAM)himlLarge);
           }
           return TRUE; // return TRUE unless you set the focus to a control
      }

      void CTest6Dlg::AddFiles(LPCTSTR lpszFileName, BOOL bAddToDocument)
      {
           int nIcon = GetIconIndex(lpszFileName, FALSE, FALSE);
           CString strSize;
           CFileFind filefind;

           // get file size
           if (filefind.FindFile(lpszFileName))
           {
                filefind.FindNextFile();
                strSize.Format("%d", filefind.GetLength());
           }
           else
                strSize = "0";

           // split path and filename
           CString strFileName = lpszFileName;
           CString strPath;

           int nPos = strFileName.ReverseFind('\');
           if (nPos != -1)
           {
                strPath = strFileName.Left(nPos);
                strFileName = strFileName.Mid(nPos + 1);
           }

           // insert to list
           int nItem = m_list.GetItemCount();
           m_list.InsertItem(nItem, strFileName, nIcon);
           m_list.SetItemText(nItem, 1, strSize);
           m_list.SetItemText(nItem, 2, strFileName.Right(3));
           m_list.SetItemText(nItem, 3, strPath);
      }

      int CTest6Dlg::GetIconIndex(LPCTSTR lpszPath, BOOL bIsDir, BOOL bSelected)
      {
           SHFILEINFO sfi;
           memset(&sfi, 0, sizeof(sfi));

           if (bIsDir)
           {
            SHGetFileInfo(lpszPath,
                         FILE_ATTRIBUTE_DIRECTORY,
                         &sfi,
                         sizeof(sfi),
                         SHGFI_SMALLICON | SHGFI_SYSICONINDEX |
                         SHGFI_USEFILEATTRIBUTES |(bSelected ? SHGFI_OPENICON : 0));
            return sfi.iIcon;
           }
           else
           {
            SHGetFileInfo (lpszPath,
                         FILE_ATTRIBUTE_NORMAL,
                         &sfi,
                         sizeof(sfi),
                         SHGFI_SMALLICON | SHGFI_SYSICONINDEX |
                         SHGFI_USEFILEATTRIBUTES | (bSelected ? SHGFI_OPENICON : 0));
            return   sfi.iIcon;
           }
           return -1;
      }

22. listctrl内容进行大数据量更新时，避免闪烁

      m_list.SetRedraw(FALSE);
      //更新内容
      m_list.SetRedraw(TRUE);
      m_list.Invalidate();
      m_list.UpdateWindow();

或者参考

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vclib/html/_mfc_cwnd.3a3a.setredraw.asp

23. listctrl排序

Q250614：How To Sort Items in a CListCtrl in Report View
http://support.microsoft.com/kb/250614/en-us

24. 在listctrl中选中某个item时动态改变其icon或bitmap

Q141834: How to change the icon or the bitmap of a CListCtrl item in Visual C++
http://support.microsoft.com/kb/141834/en-us

25. 在添加item后，再InsertColumn()后导致整列数据移动的问题

Q151897: CListCtrl::InsertColumn() Causes Column Data to Shift
http://support.microsoft.com/kb/151897/en-us

26. 关于listctrl第一列始终居左的问题

解决办法：把第一列当一个虚列，从第二列开始插入列及数据，最后删除第一列。

具体解释参阅 http://msdn.microsoft.com/library/default.asp?url=/library/en-us/shellcc/platform/commctls/listview/structures/lvcolumn.asp

27. 锁定column header的拖动

http://msdn.microsoft.com/msdnmag/issues/03/06/CQA/

28. 如何隐藏clistctrl的列

把需隐藏的列的宽度设为0,然后检测当该列为隐藏列时，用上面第27点的锁定column 的拖动来实现

29. listctrl进行大数据量操作时，使用virtual list

http://www.codeguru.com/cpp/controls/listview/advanced/article.php/c4151/
http://www.codeproject.com/listctrl/virtuallist.asp

30. 关于item只能显示259个字符的问题

解决办法：需要在item上放一个edit。

31. 响应在listctrl的column header上的鼠标右键单击

Q125694: How To Find Out Which Listview Column Was Right-Clicked
http://support.microsoft.com/kb/125694/en-us

32. 类似于windows资源管理器的listview

Q234310: How to implement a ListView control that is similar to Windows Explorer by using DirLV.exe
http://support.microsoft.com/kb/234310/en-us

33. 在ListCtrl中OnTimer只响应两次的问题

Q200054：
PRB: OnTimer() Is Not Called Repeatedly for a List Control
http://support.microsoft.com/kb/200054/en-us

34. 以下为一些为实现各种自定义功能的listctrl派生类

(1) 拖放
http://www.codeproject.com/listctrl/dragtest.asp

                   在CListCtrl和CTreeCtrl间拖放
                   http://support.microsoft.com/kb/148738/en-us

          (2)    多功能listctrl
                   支持subitem可编辑，图标，radiobutton，checkbox，字符串改变颜色的类
                   http://www.codeproject.com/listctrl/quicklist.asp

                   支持排序，subitem可编辑，subitem图标，subitem改变颜色的类
                   http://www.codeproject.com/listctrl/ReportControl.asp

(3) subitem中显示超链接
http://www.codeproject.com/listctrl/CListCtrlLink.asp

(4) subitem的tooltip提示
http://www.codeproject.com/listctrl/ctooltiplistctrl.asp

          (5)    subitem中显示进度条
                   http://www.codeproject.com/listctrl/ProgressListControl.asp
                   http://www.codeproject.com/listctrl/napster.asp
                   http://www.codeguru.com/Cpp/controls/listview/article.php/c4187/

(17) 改变ListCtrl高亮时的颜色(默认为蓝色)
处理

 NM_CUSTOMDRAW 
           http://www.codeproject.com/listctrl/lvcustomdraw.asp

相关阅读:
PHP7 开启Zend Opcache
swoole笔记之主服务器swoole_websocket_server, 监听 tcp端口 ,任务投递， http请求
Navicat 远程连接docker容器中的mysql 报错1251
nginx配置后访问不了问题
解决每次git pull需要输入用户名密码的问题
论文阅记 EfficientDet: Scalable and Efficient Object Detection
Tensorflow bug(一) ValueError The passed save_path is not a valid checkpoint
论文阅记 MobileNetV3：Searching for MobileNetV3
论文阅记 MnasNet: Platform-Aware Neural Architecture Search for Mobile
论文阅记 MobileNetV2：Inverted Residuals and Linear Bottlenecks

原文地址：https://www.cnblogs.com/greatverve/p/ctreectrl-clistctrl-highlight.html