• 系统优化 /etc/sysctl.conf


    # sysctl settings are defined through files in
    # /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
    #
    # Vendors settings live in /usr/lib/sysctl.d/.
    # To override a whole file, create a new file with the same in
    # /etc/sysctl.d/ and put new settings there. To override
    # only specific settings, add a file with a lexically later
    # name in /etc/sysctl.d/ and put new settings there.
    #
    # For more information, see sysctl.conf(5) and sysctl.d(5).
    #关闭ipv6
    
    net.ipv6.conf.all.disable_ipv6 = 1
    
    net.ipv6.conf.default.disable_ipv6 = 1
    
    # 避免放大攻击
    
    net.ipv4.icmp_echo_ignore_broadcasts = 1
    
    # 开启恶意icmp错误消息保护
    
    net.ipv4.icmp_ignore_bogus_error_responses = 1
    
    #关闭路由转发
    
    net.ipv4.ip_forward = 0
    
    net.ipv4.conf.all.send_redirects = 0
    
    net.ipv4.conf.default.send_redirects = 0
    
    #开启反向路径过滤
    
    net.ipv4.conf.all.rp_filter = 1
    
    net.ipv4.conf.default.rp_filter = 1
    
    #处理无源路由的包
    
    net.ipv4.conf.all.accept_source_route = 0
    
    net.ipv4.conf.default.accept_source_route = 0
    
    #关闭sysrq功能
    
    kernel.sysrq = 0
    
    #core文件名中添加pid作为扩展名
    
    kernel.core_uses_pid = 1
    
    # 开启SYN洪水攻击保护
    
    net.ipv4.tcp_syncookies = 1
    
    #修改消息队列长度
    
    kernel.msgmnb = 65536
    
    kernel.msgmax = 65536
    
    #设置最大内存共享段大小bytes
    
    kernel.shmmax = 68719476736
    
    kernel.shmall = 4294967296
    
    #timewait的数量,默认180000
    
    net.ipv4.tcp_max_tw_buckets = 6000
    
    net.ipv4.tcp_sack = 1
    
    net.ipv4.tcp_window_scaling = 1
    
    net.ipv4.tcp_rmem = 4096        87380   4194304
    
    net.ipv4.tcp_wmem = 4096        16384   4194304
    
    net.core.wmem_default = 8388608
    
    net.core.rmem_default = 8388608
    
    net.core.rmem_max = 16777216
    
    net.core.wmem_max = 16777216
    
    #每个网络接口接收数据包的速率比内核处理这些包的速率快时,允许送到队列的数据包的最大数目
    
    net.core.netdev_max_backlog = 262144
    
    #限制仅仅是为了防止简单的DoS 攻击
    
    net.ipv4.tcp_max_orphans = 3276800
    
    #未收到客户端确认信息的连接请求的最大值
    
    net.ipv4.tcp_max_syn_backlog = 262144
    
    net.ipv4.tcp_timestamps = 0
    
    #内核放弃建立连接之前发送SYNACK 包的数量
    
    net.ipv4.tcp_synack_retries = 1
    
    #内核放弃建立连接之前发送SYN 包的数量
    
    net.ipv4.tcp_syn_retries = 1
    
    #启用timewait 快速回收
    
    net.ipv4.tcp_tw_recycle = 1
    
    #开启重用。允许将TIME-WAIT sockets 重新用于新的TCP 连接
    
    net.ipv4.tcp_tw_reuse = 1
    
    net.ipv4.tcp_mem = 94500000 915000000 927000000
    
    net.ipv4.tcp_fin_timeout = 1
    
    #当keepalive 起用的时候,TCP 发送keepalive 消息的频度。缺省是2 小时
    
    net.ipv4.tcp_keepalive_time = 30
    
    #允许系统打开的端口范围
    
    net.ipv4.ip_local_port_range = 1024    65000
    
    #修改防火墙表大小,默认65536
    
    #net.netfilter.nf_conntrack_max=655350
    
    #net.netfilter.nf_conntrack_tcp_timeout_established=1200
    
    # 确保无人能修改路由表
    
    net.ipv4.conf.all.accept_redirects = 0
    
    net.ipv4.conf.default.accept_redirects = 0
    
    net.ipv4.conf.all.secure_redirects = 0
    
    net.ipv4.conf.default.secure_redirects = 0
    vm.max_map_count = 655360
    fs.file-max=655350
  • 相关阅读:
    MVC4.0 上传Excel并存入数据库
    解决汉化pycharme之后设置打不开的问题
    初学JavaScript正则表达式(一)
    phpstudy配置虚拟域名
    设置了相对定位relative之后,改变top值,如何去掉多余空白?
    git clone克隆代码显示“无权限或者确认存储库是否存在”
    xampp配置虚拟域名
    PHP连接Navicat For Mysql并取得数据
    Vue中怎样使用swiper组件?
    Vue项目开发前的准备工作,node的安装,vue-cli的安装
  • 原文地址:https://www.cnblogs.com/gaoyuechen/p/9488791.html
Copyright © 2020-2023  润新知