<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>定位详述</title>
<style>
/* css3对position属性的相关定义:
static:无特殊定位,对象遵循正常文档流。top,right,bottom,left等属性不会被应用。
relative:对象遵循正常文档流,但将依据top,right,bottom,left等属性在正常文档流中偏移位置。而其层叠通过z-index属性定义。
absolute:对象脱离正常文档流,使用top,right,bottom,left等属性进行绝对定位。而其层叠通过z-index属性定义。
fixed:对象脱离正常文档流,使用top,right,bottom,left等属性以窗口为参考点进行定位,当出现滚动条时,对象不会随着滚动。而其层叠通过z-index属性定义。*/
/* static,无特殊定位,它是html元素默认的定位方式,即我们不设定元素的position属性时默认的position值就是static,
它遵循正常的文档流对象,对象占用文档空间,该定位方式下,top、right、bottom、left、z-index等属性是无效的 */
/* relative定位,又称为相对定位,相对定位相对的是它原本在文档流中的位置而进行的偏移,而我们也知道relative定位也是遵循正常的文档流,
它没有脱离文档流,但是它的top/left/right/bottom属性是生效的,可以说它是static到absoult的一个中间过渡属性,
最重要的是它还占有文档空间,而且占据的文档空间不会随 top / right / left / bottom 等属性的偏移而发生变动,
也就是说它后面的元素是依据虚线位置( top / left / right / bottom 等属性生效之前)进行的定位,这点一定要理解 */
/* top / right / left / bottom 属性是不会对relative定位的元素所占据的文档空间产生偏移,
margin / padding会让该文档空间产生偏移 */
.first {
width: 200px;
height: 100px;
border: 1px solid red;
position: relative;
top: 20px;
left: 20px;
margin: 100px;
}
.second {
width: 200px;
height: 100px;
border: 1px solid blue;
}
/* left:0; right:0; top:0; bottom:0; margin:auto;会使child居中,如果child没有宽高,则会继承父集的宽高,适合body 内的遮罩 */
.child {
width: 50px;
height: 50px;
background-color: aqua;
position: absolute;
left: 0;
right: 0;
top: 0;
bottom: 0;
margin: auto;
}
/* absoulte定位,使用absoult定位的元素脱离文档流后,就只能根据祖先类元素(父类以上)进行定位,而这个祖先类还必须是以postion非static方式定位的,
举个例子,a元素使用absoulte定位,它会从父类开始找起,寻找以position非static方式定位的祖先类元素(注意,一定要是直系祖先才算哦~),直到<html>标签为止,
这里还需要注意的是,relative和static方式在最外层时是以<body>标签为定位原点的,
而absoulte方式在无父级是position非static定位时是以<html>作为原点定位。<html>和<body>元素相差9px左右。*/
/* 为什么absoulte定位要加 top:0; left:0;其实加上这两个属性是完全必要的,
因为我们如果使用absoulte或fixed定位的话,必须指定 left、right、 top、 bottom 属性中的至少一个,
否则left/right/top/bottom属性会使用它们的默认值 auto ,
这将导致对象遵从正常的HTML布局规则,在前一个对象之后立即被呈递,简单讲就是都变成relative,会占用文档空间,这点非常重要,
很多人使用absolute定位后发现没有脱离文档流就是这个原因,这里要特别注意~~~
实验一下设置left/right/top/bottom 为auto,absoulte定位会不会变成relative
少了left/right/top/bottom属性不行,那如果我们多设了呢?记住下面的规则:
如果top和bottom一同存在的话,那么只有top生效。
如果left和right一同存在的话,那么只有left生效。 */
html {
border: 1px dashed green;
}
body {
border: 1px dashed purple;
}
/* #first {
200px;
height: 100px;
border: 1px solid red;
position: relative;
}
#second {
200px;
height: 100px;
border: 1px solid blue;
position: absolute;
top: 0;
left: 0;
} */
/* 祖先类的margin会让子类的absoulte跟着偏移,而padding却不会让子类的absoulte发生偏移 */
#first {
width: 200px;
height: 100px;
border: 1px solid red;
position: relative;
margin: 40px;
padding: 40px;
}
#second {
width: 200px;
height: 100px;
border: 1px solid blue;
position: absolute;
top: 0;
left: 0;
}
/* 固定定位(fixed):
fixed定位,又称为固定定位,它和absoult定位一样,都脱离了文档流,并且能够根据top、right、left、bottom属性进行定位,
但不同的是fixed是根据窗口为原点进行偏移定位的,也就是说它不会根据滚动条的滚动而进行偏移。*/
/* z-index属性:
z-index,又称为对象的层叠顺序,它用一个整数来定义堆叠的层次,整数值越大,则被层叠在越上面,当然这是指同级元素间的堆叠,
如果两个对象的此属性具有同样的值,那么将依据它们在HTML文档中流的顺序层叠,写在后面的将会覆盖前面的。
需要注意的是,父子关系是无法用z-index来设定上下关系的,一定是子级在上父级在下。
Note:使用static 定位或无position定位的元素z-index属性是无效的。 */
</style>
</head>
<body>
<!-- <div class="first">
<div class="child"></div>
</div>
<div class="second"></div> -->
<!-- <div id="first">relative</div>
<div id="second">absoult</div> -->
<div id="first">first
<div id="second">second</div>
</div>
</body>
</html>
参考:https://www.cnblogs.com/keyi/p/5818103.html