• eppf map机制



    /*
    eBPF example program: * - creates arraymap in kernel with key 4 bytes and value 8 bytes * * - loads eBPF program: * r0 = skb->data[ETH_HLEN + offsetof(struct iphdr, protocol)]; * *(u32*)(fp - 4) = r0; * // assuming packet is IPv4, lookup ip->proto in a map * value = bpf_map_lookup_elem(map_fd, fp - 4); * if (value) * (*(u64*)value) += 1; * * - attaches this program to loopback interface "lo" raw socket * * - every second user space reads map[tcp], map[udp], map[icmp] to see * how many packets of given protocol were seen on "lo" */ #include <stdio.h> #include <unistd.h> #include <assert.h> #include <linux/bpf.h> #include <string.h> #include <stdlib.h> #include <errno.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/if_ether.h> #include <linux/ip.h> #include <stddef.h> #include <bpf/bpf.h> #include "bpf_insn.h" #include "sock_example.h" char bpf_log_buf[BPF_LOG_BUF_SIZE]; static int test_sock(void) { int sock = -1, map_fd, prog_fd, i, key; long long value = 0, tcp_cnt, udp_cnt, icmp_cnt; map_fd = bpf_create_map(BPF_MAP_TYPE_ARRAY, sizeof(key), sizeof(value), 256, 0); if (map_fd < 0) { printf("failed to create map '%s' ", strerror(errno)); goto cleanup; } struct bpf_insn prog[] = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), BPF_LD_ABS(BPF_B, ETH_HLEN + offsetof(struct iphdr, protocol) /* R0 = ip->proto */), BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -4), /* *(u32 *)(fp - 4) = r0 */ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), /* r2 = fp - 4 */ BPF_LD_MAP_FD(BPF_REG_1, map_fd), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), BPF_MOV64_IMM(BPF_REG_1, 1), /* r1 = 1 */ BPF_RAW_INSN(BPF_STX | BPF_XADD | BPF_DW, BPF_REG_0, BPF_REG_1, 0, 0), /* xadd r0 += r1 */ BPF_MOV64_IMM(BPF_REG_0, 0), /* r0 = 0 */ BPF_EXIT_INSN(), }; size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn); prog_fd = bpf_load_program(BPF_PROG_TYPE_SOCKET_FILTER, prog, insns_cnt, "GPL", 0, bpf_log_buf, BPF_LOG_BUF_SIZE); if (prog_fd < 0) { printf("failed to load prog '%s' ", strerror(errno)); goto cleanup; } sock = open_raw_sock("lo"); if (setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd, sizeof(prog_fd)) < 0) { printf("setsockopt %s ", strerror(errno)); goto cleanup; } for (i = 0; i < 10; i++) { key = IPPROTO_TCP; assert(bpf_map_lookup_elem(map_fd, &key, &tcp_cnt) == 0); key = IPPROTO_UDP; assert(bpf_map_lookup_elem(map_fd, &key, &udp_cnt) == 0); key = IPPROTO_ICMP; assert(bpf_map_lookup_elem(map_fd, &key, &icmp_cnt) == 0); printf("TCP %lld UDP %lld ICMP %lld packets ", tcp_cnt, udp_cnt, icmp_cnt); sleep(1); } cleanup: /* maps, programs, raw sockets will auto cleanup on process exit */ return 0; } int main(void) { FILE *f; f = popen("ping -c5 localhost", "r"); (void)f; return test_sock(); }

     有如下两种方式加载map

    1、BPF_LD_MAP_FD加载map

     /* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */
    #define BPF_LD_MAP_FD(DST, MAP_FD)
    BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD)

    #define BPF_LD_IMM64_RAW(DST, SRC, IMM)
    ((struct bpf_insn) {
    .code = BPF_LD | BPF_DW | BPF_IMM,
    .dst_reg = DST,
    .src_reg = SRC,
    .off = 0,
    .imm = (__u32) (IMM) }),
    ((struct bpf_insn) {
    .code = 0, /* zero is reserved opcode */
    .dst_reg = 0,
    .src_reg = 0,
    .off = 0,
    .imm = ((__u64) (IMM)) >> 32 })

    #ifndef BPF_PSEUDO_MAP_FD
    # define BPF_PSEUDO_MAP_FD 1
    #endif

    bpf_prog_load -->  bpf_check-->replace_map_fd_with_map_ptr

    2、replace_map_fd_with_map_ptr 加载map
           struct bpf_insn *insn = env->prog->insnsi;
      map = __bpf_map_get(f); // from file private_data
      insn[0].imm = (u32) (unsigned long) map;
      insn[1].imm = ((u64) (unsigned long) map) >> 32;

    /* SPDX-License-Identifier: GPL-2.0 */
    #include <stdlib.h>
    #include <stdio.h>
    #include <linux/unistd.h>
    #include <unistd.h>
    #include <string.h>
    #include <errno.h>
    #include <linux/if_ether.h>
    #include <net/if.h>
    #include <linux/if_packet.h>
    #include <arpa/inet.h>
    
    static inline int open_raw_sock(const char *name)
    {
        struct sockaddr_ll sll;
        int sock;
    
        sock = socket(PF_PACKET, SOCK_RAW | SOCK_NONBLOCK | SOCK_CLOEXEC, htons(ETH_P_ALL));
        if (sock < 0) {
            printf("cannot create raw socket
    ");
            return -1;
        }
    
        memset(&sll, 0, sizeof(sll));
        sll.sll_family = AF_PACKET;
        sll.sll_ifindex = if_nametoindex(name);
        sll.sll_protocol = htons(ETH_P_ALL);
        if (bind(sock, (struct sockaddr *)&sll, sizeof(sll)) < 0) {
            printf("bind to %s: %s
    ", name, strerror(errno));
            close(sock);
            return -1;
        }
    
        return sock;
    }

     

    另外打开两个终端分别执行ping 和telnet操作

  • 相关阅读:
    SQL中 patindex函数的用法
    纵表与横表互转的SQL
    几种数据库的大数据批量插入【转】
    使用cmd命令行窗口操作SqlServer
    C#性能优化实践
    C# 图像处理(二)—— 黑白效果
    SQLSERVER系统视图
    SQLServer行列转换 Pivot UnPivot
    C#图片处理常见方法性能比较
    GSM局数据制作1(Erision)
  • 原文地址:https://www.cnblogs.com/dream397/p/12222369.html
Copyright © 2020-2023  润新知