• POJ1523 SPF


    Time Limit: 1000MS   Memory Limit: 10000K
    Total Submissions: 8254   Accepted: 3772

    Description

    Consider the two networks shown below. Assuming that data moves around these networks only between directly connected nodes on a peer-to-peer basis, a failure of a single node, 3, in the network on the left would prevent some of the still available nodes from communicating with each other. Nodes 1 and 2 could still communicate with each other as could nodes 4 and 5, but communication between any other pairs of nodes would no longer be possible. 

    Node 3 is therefore a Single Point of Failure (SPF) for this network. Strictly, an SPF will be defined as any node that, if unavailable, would prevent at least one pair of available nodes from being able to communicate on what was previously a fully connected network. Note that the network on the right has no such node; there is no SPF in the network. At least two machines must fail before there are any pairs of available nodes which cannot communicate. 

    Input

    The input will contain the description of several networks. A network description will consist of pairs of integers, one pair per line, that identify connected nodes. Ordering of the pairs is irrelevant; 1 2 and 2 1 specify the same connection. All node numbers will range from 1 to 1000. A line containing a single zero ends the list of connected nodes. An empty network description flags the end of the input. Blank lines in the input file should be ignored.

    Output

    For each network in the input, you will output its number in the file, followed by a list of any SPF nodes that exist. 

    The first network in the file should be identified as "Network #1", the second as "Network #2", etc. For each SPF node, output a line, formatted as shown in the examples below, that identifies the node and the number of fully connected subnets that remain when that node fails. If the network has no SPF nodes, simply output the text "No SPF nodes" instead of a list of SPF nodes.

    Sample Input

    1 2
    5 4
    3 1
    3 2
    3 4
    3 5
    0
    
    1 2
    2 3
    3 4
    4 5
    5 1
    0
    
    1 2
    2 3
    3 4
    4 6
    6 3
    2 5
    5 1
    0
    
    0

    Sample Output

    Network #1
      SPF node 3 leaves 2 subnets
    
    Network #2
      No SPF nodes
    
    Network #3
      SPF node 2 leaves 2 subnets
      SPF node 3 leaves 2 subnets

    Source

    点双连通分量模板题

     1 /*by SilverN*/
     2 #include<algorithm>
     3 #include<iostream>
     4 #include<cstring>
     5 #include<cstdio>
     6 #include<cmath>
     7 #include<vector>
     8 using namespace std;
     9 const int mxn=1210;
    10 struct edge{
    11     int v,nxt;
    12 }e[mxn<<2];
    13 int hd[mxn],mct=0;
    14 void add_edge(int u,int v){
    15     e[++mct].v=v;e[mct].nxt=hd[u];hd[u]=mct;
    16     return;
    17 }
    18 int n;
    19 int low[mxn],dfn[mxn],dtime=0;
    20 int num[mxn];
    21 int st[mxn],top=0;
    22 bool cut[mxn];
    23 void DFS(int u,int fa){
    24     low[u]=dfn[u]=++dtime;
    25     st[++top]=u;
    26     int i,j;
    27     for(i=hd[u];i;i=e[i].nxt){
    28         int v=e[i].v;
    29         if(v==fa)continue;
    30         if(!dfn[v]){
    31             DFS(v,u);
    32             if(low[v]>=dfn[u]){
    33                 cut[u]=1;
    34                 int s=0;
    35                 do{
    36                     s=st[top--];
    37                     ++num[s];
    38                 }while(u!=s);
    39                 top++;
    40             }
    41 //            num[u]++;
    42             low[u]=min(low[u],low[v]);
    43         }
    44         else low[u]=min(dfn[v],low[u]);
    45     }
    46     return;
    47 }
    48 bool have[mxn];
    49 int main(){
    50     int cas=0;
    51     while(1){
    52         memset(hd,0,sizeof hd);
    53         memset(cut,0,sizeof cut);
    54         memset(low,0,sizeof low);
    55         memset(dfn,0,sizeof dfn);
    56         memset(have,0,sizeof have);
    57         memset(num,0,sizeof num);
    58         mct=dtime=top=0;
    59         int i,j,u,v;
    60         bool flag=0;
    61         while(scanf("%d",&u) && u){
    62             scanf("%d",&v);
    63             have[u]=have[v]=1;
    64             add_edge(u,v);
    65             add_edge(v,u);
    66             flag=1;
    67         }
    68         if(!flag)break;
    69         for(i=1;i<=1000;i++)
    70             if(have[i] && !dfn[i])DFS(i,0);
    71         printf("Network #%d
    ",++cas);
    72         flag=0;
    73         for(i=1;i<=1000;i++){
    74             if(num[i]>=2){
    75                 flag=1;
    76                 printf("  SPF node %d leaves %d subnets
    ",i,num[i]);
    77             }
    78         }
    79         if(!flag)printf("  No SPF nodes
    ");
    80         printf("
    ");
    81     }
    82     return 0;
    83 }
  • 相关阅读:
    11月2日
    Rain和小爱的幸福山洞
    乍冷初寒
    支付宝接口源代码
    因没有设置文件夹权限导致的发布的页面不能在文本中写人数据
    asp.net真的是并行处理request的吗?
    Javascript学习笔记
    .net Windows服务程序和安装程序制作图解
    String.Trim()真相大揭秘
    c#基础知识总结学习
  • 原文地址:https://www.cnblogs.com/SilverNebula/p/6049960.html
Copyright © 2020-2023  润新知