• 【hdu 6444】Neko's loop


    【链接】 我是链接,点我呀:)
    【题意】

    给你一个序列. 你可以选择起点i。 然后每次往右跳k次。 得到下一个值a[i+k];。 问你跳m次能得到的最大值ma是多少。 如果>=s输出0 否则输出s-ma;

    【题解】

    最后肯定会形成gcd(n,k)个环的。 对于每个环(长度为cnt。 预处理出从1..2*cnt的前缀和C[2*cnt](当成链处理就好 枚举它从起点i开始。 然后考虑它会怎么走? 1.如果c[cnt]>0,temp1加上m/cnt*C[cnt],然后对于剩余的m%cnt次走的机会。 求出c[i-1..i+m%cnt-1]这一段的最大值get_ma,减去c[i-1]就是剩余的m%cnt次能走出来的最大值了。即temp1+=get_ma-c[i-1]; temp = max(temp,temp1) 2.如果m>=cnt,那么还有一种可能,就是剩余的最后一圈留着不走完整圈,而只取一个最大的值,这个时候 如果c[cnt]>0,temp2+=(m/cnt - 1)*C[cnt],然后我们还留了一圈,也即cnt次机会可以走 则求出c[i-1..i+cnt-1]这一段的最大值get_ma2,然后再减去c[i-1]就是剩余的cnt次能走出来的最大值了,即temp2+=get_ma2-C[i-1] temp = max(temp,tepm1) 对于每个起点i。都求出temp1,tepm2 最后return temp 就是当前这个环上走m次能得到的最大值了。 枚举所有的环取最大的temp就是答案了

    【代码】

    
    #include <bits/stdc++.h>
    #define LL long long
    using namespace std;
    
    const int N = 1e4;
    const int M = 15;
    
    int n,m,k;
    LL s;
    int a[N+10],b[N*2+10],cnt;
    LL c[N*2+10],mi[N*2+10][M+5];
    int vis[N+10];
    
    LL get_ma(int l,int r){
        int len = r-l+1;
        len = log2(len);
        return max(mi[l][len],mi[r-(1<<len)+1][len]);
    }
    
    LL ok(){
         c[0] = 0;
        for (int i = 1;i <= cnt;i++)
            c[i] = b[i],c[i+cnt] = b[i];
        for (int i = 1;i <= 2*cnt;i++) c[i]+=c[i-1];
        for (int i = 0;i <= 2*cnt;i++) mi[i][0] = c[i];
        for (int L = 1;L<=M;L++)
            for (int i = 0;i <= 2*cnt;i++){
                if (i+(1<<L)-1>2*cnt) break;
                mi[i][L] = max(mi[i][L-1],mi[i+(1<<(L-1))][L-1]);
            }
        LL temp = 0;
        for (int i = 1;i <= cnt;i++){
            LL temp1 = 0;
            //第一种情况.
            //如果环的和大于0就尽量用
            if (c[cnt]>0) temp1 += 1LL*m/cnt*c[cnt];
            int rest = m%cnt;
            if (rest>0) temp1+=get_ma(i-1,i+rest-1)-c[i-1];
    
            LL temp2 = 0;
            //第二种情况
            //留cnt个
            if (m>=cnt){
                if (c[cnt]>0) temp2 += 1LL*(m-cnt)/cnt*c[cnt];
                temp2+=get_ma(i-1,i+cnt-1)-c[i-1];
            }
            temp = max(temp,temp1);
            temp = max(temp,temp2);
        }
        return temp;
    }
    
    int main()
    {
        //freopen("D:\rush.txt","r",stdin);
        ios::sync_with_stdio(0),cin.tie(0);
        int T;
        cin >> T;
        int kk = 0;
        while (T--){
            cin >> n >> s >> m >> k;
            for (int i = 1;i <= n;i++) cin >> a[i];
            for (int i = 1;i <= n;i++) vis[i] = 0;
            LL ans = 0;
            for (int i = 1;i <= n;i++)
                if (vis[i]==0){
                    cnt = 0;
                    for (int j = i;vis[j]==0;j = (j+k)>n?(j+k-n):j+k){
                        cnt++;
                        b[cnt] = a[j];
                        vis[j] = 1;
                    }
                    ans = max(ans,ok());
                }
            cout<<"Case #"<<++kk<<": ";
            if (s<ans)
                cout<<0<<endl;
            else
                cout<<s-ans<<endl;
        }
        return 0;
    }
    
    
  • 相关阅读:
    终结篇:MyBatis原理深入解析(二)
    Centos7 安装clamav杀毒
    jenkins 自动化部署
    docker 安装redis
    linux CentOS7 安装字体库-转
    docker 安装jenkins
    linux 下安装docker
    linux 下安装redis
    linux 下mongo 基础配置
    Linux下MongoDB安装和配置详解
  • 原文地址:https://www.cnblogs.com/AWCXV/p/9698652.html
Copyright © 2020-2023  润新知