• 我的vim 配置文件


    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 一般设定
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

    "For the dark background mode
    set t_Co=256
    "支持256色
    syntax enable
    "set background=dark
    "colorscheme solarized
    colorscheme molokai
    "设定配色方案

    " 设定默认解码
    set fenc=utf-8
    set fencs=utf-8,usc-bom,euc-jp,gb18030,gbk,gb2312,cp936

    " 不要使用vi的键盘模式,而是vim自己的
    set nocompatible

    " history文件中需要记录的行数
    set history=100

    " 在处理未保存或只读文件的时候,弹出确认
    set confirm

    " 与windows共享剪贴板
    set clipboard+=unnamed

    " 侦测文件类型
    filetype on

    " 载入文件类型插件
    filetype plugin on

    " 为特定文件类型载入相关缩进文件
    filetype indent on

    " 保存全局变量
    set viminfo+=!

    " 带有如下符号的单词不要被换行分割
    set iskeyword+=_,$,@,%,#,-

    " 语法高亮
    syntax on

    " 高亮字符,让其不受100列限制
    :highlight OverLength ctermbg=red ctermfg=white guibg=red guifg=white
    :match OverLength '\%1001v.*'

    " 状态行颜色
    highlight StatusLine guifg=SlateBlue guibg=Yellow
    highlight StatusLineNC guifg=Gray guibg=White

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 文件设置
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 不要备份文件(根据自己需要取舍)
    set nobackup

    " 不要生成swap文件,当buffer被丢弃的时候隐藏它
    setlocal noswapfile
    set bufhidden=hide

    " 字符间插入的像素行数目
    set linespace=0

    " 增强模式中的命令行自动完成操作
    set wildmenu

    " 在状态行上显示光标所在位置的行号和列号
    set ruler
    set rulerformat=%20(%2*%<%f%=\ %m%r\ %3l\ %c\ %p%%%)

    " 命令行(在状态行下)的高度,默认为1,这里是2
    set cmdheight=2

    " 使回格键(backspace)正常处理indent, eol, start等
    set backspace=2

    " 允许backspace和光标键跨越行边界
    set whichwrap+=<,>,h,l

    " 可以在buffer的任何地方使用鼠标(类似office中在工作区双击鼠标定位)
    set mouse=a
    set selection=exclusive
    set selectmode=mouse,key

    " 启动的时候不显示那个援助索马里儿童的提示
    set shortmess=atI

    " 通过使用: commands命令,告诉我们文件的哪一行被改变过
    set report=0

    " 不让vim发出讨厌的滴滴声
    set noerrorbells

    " 在被分割的窗口间显示空白,便于阅读
    set fillchars=vert:\ ,stl:\ ,stlnc:\

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 搜索和匹配
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 高亮显示匹配的括号
    set showmatch

    " 匹配括号高亮的时间(单位是十分之一秒)
    set matchtime=5

    " 在搜索的时候忽略大小写
    set ignorecase

    " 不要高亮被搜索的句子(phrases)
    set nohlsearch

    " 在搜索时,输入的词句的逐字符高亮(类似firefox的搜索)
    set incsearch

    " 输入:set list命令是应该显示些啥?
    set listchars=tab:\|\ ,trail:.,extends:>,precedes:<,eol:$

    " 光标移动到buffer的顶部和底部时保持3行距离
    set scrolloff=3

    " 不要闪烁
    set novisualbell

    " 我的状态行显示的内容(包括文件类型和解码)
    set statusline=%F%m%r%h%w\ [FORMAT=%{&ff}]\ [TYPE=%Y]\ [POS=%l,%v][%p%%]\ %{strftime(\"%d/%m/%y\ -\ %H:%M\")}

    " 总是显示状态行
    set laststatus=2

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 文本格式和排版
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 自动格式化
    set formatoptions=tcrqn

    " 继承前一行的缩进方式,特别适用于多行注释
    set autoindent

    " 为C程序提供自动缩进
    set smartindent

    " 使用C样式的缩进
    set cindent

    " 制表符为4
    set tabstop=4

    " 统一缩进为4
    set softtabstop=4
    set shiftwidth=4

    " 不要用空格代替制表符
    set noexpandtab

    " 不要换行
    set nowrap

    " 在行和段开始处使用制表符
    set smarttab

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " CTags的设定
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 按照名称排序
    let Tlist_Sort_Type = "name"

    " 在右侧显示窗口
    let Tlist_Use_Right_Window = 1

    " 压缩方式
    let Tlist_Compart_Format = 1

    " 如果只有一个buffer,kill窗口也kill掉buffer
    let Tlist_Exist_OnlyWindow = 1

    " 不要关闭其他文件的tags
    let Tlist_File_Fold_Auto_Close = 0

    " 不要显示折叠树
    let Tlist_Enable_Fold_Column = 0

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " Autocommands
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    " 只在下列文件类型被侦测到的时候显示行号,普通文本文件不显示

    if has("autocmd")
    autocmd FileType xml,html,c,cs,java,perl,shell,bash,cpp,python,vim,php,ruby set number
    autocmd FileType xml,html vmap <C-o> <ESC>'<i<!--<ESC>o<ESC>'>o-->
    autocmd FileType java,c,cpp,cs vmap <C-o> <ESC>'<o/*<ESC>'>o*/
    autocmd FileType html,text,php,vim,c,java,xml,bash,shell,perl,python setlocal textwidth=100
    autocmd Filetype html,xml,xsl source $VIMRUNTIME/plugin/closetag.vim
    autocmd BufReadPost *
    \ if line("'\"") > 0 && line("'\"") <= line("$") |
    \ exe "normal g`\"" |
    \ endif
    endif " has("autocmd")

    " F5编译和运行C程序,F6编译和运行C++程序
    " 请注意,下述代码在windows下使用会报错
    " 需要去掉./这两个字符

    " C的编译和运行

    func! CompileRunGcc()
    exec "w"
    if filereadable("/home/darkdream/problem/exe/%<")
    silent exec "! rm /home/darkdream/problem/exe/%<"
    endif
    silent exec "!gcc % -o /home/darkdream/problem/exe/%<"
    exec "! /home/darkdream/problem/exe/%<"
    endfunc

    " C++的编译和运行

    func! CompileRunGpp()
    exec "w"
    let temp = "/home/darkdream/problem/exe/ "
    let outfilename=substitute(temp," ",expand("%<"),'g')
    if filereadable(substitute("/home/darkdream/problem/exe/ "," ",expand("%<"),'g'))
    silent exec "! rm ".outfilename
    endif
    silent exec "!g++ -o2 % -o /home/darkdream/problem/exe/%<"
    "if filereadable(outfilename)
    exec "! /home/darkdream/problem/exe/%<"
    endfunc

    func! CompileCode()
    if &filetype == "c"
    exec "call CompileRunGcc()"
    elseif &filetype == "cpp"
    exec "call CompileRunGpp()"
    endif
    endfunc
    map<F5> :call CompileCode()<CR>

    map <F4> :call TitleDet2() <cr>
    function AddTitle2()
    call append(0,"/************************************************************")
    call append(1," * Author : darkdream")
    call append(2," * Email : darkdream1994@gmail.com ")
    call append(3," * Last modified : ".strftime("%Y-%m-%d %H:%M"))
    call append(4," * Filename : ".expand("%:t"))
    call append(5," * Description :" )
    call append(6," * *********************************************************/")
    echohl WarningMsg |echo "Successful in adding the copyright." | echohl None
    endf

    function UpdateTitle2()
    normal m'
    execute '/# *Last modified:/s@:.*$@\=strftime(":\t%Y-%m-%d %H:%M")@'
    normal ''
    normal mk
    execute '/# *Filename:/s@:.*$@\=":\t\t".expand("%:t")@'
    execute "noh"
    normal 'k
    echohl WarningMsg | echo "Successful in updating the copy right." | echohl None
    endfunction

    function TitleDet2()
    let n=1
    while n < 7
    let line = getline(n)
    if line =~ '^\#\s*\S*Last\smodified:\S*.*$'
    call UpdateTitle2()
    return
    endif
    let n = n+1
    endwhile
    call AddTitle2()
    endfunction

    autocmd BufNewFile *.c,*.py,*.cpp,*.sh,*.java exec ":call SetTitle()"
    func SetTitle()

    if &filetype == 'sh'
    call setline(1,"\#!/bin/bash")
    call append(line("."), "# Author: darkdream")
    call append(line(".")+1, "# Created Time: ".strftime("%c"))
    call append(line(".")+2, "")
    elseif &filetype == 'cpp'
    call setline(1,"// File Name: ".expand("%"))
    call append(line("."), "// Author: darkdream")
    call append(line(".")+1, "// Created Time: ".strftime("%c"))
    call append(line(".")+2, "")
    call append(line(".")+3, "#include<vector>")
    call append(line(".")+4, "#include<list>")
    call append(line(".")+5, "#include<map>")
    call append(line(".")+6, "#include<set>")
    call append(line(".")+7, "#include<deque>")
    call append(line(".")+8, "#include<stack>")
    call append(line(".")+9, "#include<bitset>")
    call append(line(".")+10, "#include<algorithm>")
    call append(line(".")+11, "#include<functional>")
    call append(line(".")+12, "#include<numeric>")
    call append(line(".")+13, "#include<utility>")
    call append(line(".")+14, "#include<sstream>")
    call append(line(".")+15, "#include<iostream>")
    call append(line(".")+16, "#include<iomanip>")
    call append(line(".")+17, "#include<cstdio>")
    call append(line(".")+18, "#include<cmath>")
    call append(line(".")+19, "#include<cstdlib>")
    call append(line(".")+20, "#include<cstring>")
    call append(line(".")+21, "#include<ctime>")
    call append(line(".")+22, "#define LL long long")
    call append(line(".")+23, "")
    call append(line(".")+24, "using namespace std;")
    call append(line(".")+25, "")
    call append(line(".")+26, "int main(){")
    call append(line(".")+27,"")
    call append(line(".")+28, "return 0;")
    call append(line(".")+29, "}")
    elseif &filetype == 'python'
    call setline(1,"\#!/usr/bin/env python")
    call append(line("."), "# Author: darkdream")
    call append(line(".")+1, "# Created Time: ".strftime("%c"))
    call append(line(".")+2, "")
    elseif &filetype == 'c'
    call setline(1,"// File Name: ".expand("%"))
    call append(line("."), "// Author: darkdream")
    call append(line(".")+1, "// Created Time: ".strftime("%c"))
    call append(line(".")+2, "")
    call append(line(".")+3,"#include<stdio.h>")
    call append(line(".")+4,"#include<string.h>")
    call append(line(".")+5,"#include<stdlib.h>")
    call append(line(".")+6,"#include<time.h>")
    call append(line(".")+7,"#include<math.h>")
    call append(line(".")+8,"")
    call append(line(".")+9,"int main(){")
    call append(line(".")+10,"")
    call append(line(".")+11,"return 0 ;")
    call append(line(".")+12,"}")
    else
    call setline(1,"/*")
    call append(line("."), "* Author: rechen")
    call append(line(".")+1, "* Created Time: ".strftime("%c"))
    call append(line(".")+2, "*/")
    call append(line(".")+3, "")
    endif

    autocmd BufNewFile * normal G
    endfunc


    " 能够漂亮地显示.NFO文件
    set encoding=utf-8
    function! SetFileEncodings(encodings)
    let b:myfileencodingsbak=&fileencodings
    let &fileencodings=a:encodings
    endfunction
    function! RestoreFileEncodings()
    let &fileencodings=b:myfileencodingsbak
    unlet b:myfileencodingsbak
    endfunction

    au BufReadPre *.nfo call SetFileEncodings('cp437')|set ambiwidth=single
    au BufReadPost *.nfo call RestoreFileEncodings()

    " 高亮显示普通txt文件(需要txt.vim脚本)
    au BufRead,BufNewFile * setfiletype txt

    " 用空格键来开关折叠
    set foldenable
    set foldmethod=manual
    nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>

    " minibufexpl插件的一般设置
    let g:miniBufExplMapWindowNavVim = 1
    let g:miniBufExplMapWindowNavArrows = 1
    let g:miniBufExplMapCTabSwitchBufs = 1
    let g:miniBufExplModSelTarget = 1

  • 相关阅读:
    linux线程
    linux线程
    c++之堆、栈、数据段、
    fork()、僵死进程和孤儿进程
    linux之管理mysql
    linux之管理apache
    Django 时间与时区设置问题
    Django rest framework:__str__ returned non-string (type NoneType) 真正原因
    Django获取当前页面的URL——小记
    Django中出现:TemplateDoesNotExist at
  • 原文地址:https://www.cnblogs.com/zyue/p/2872218.html
Copyright © 2020-2023  润新知