• 02.Redis主从集群的Sentinel配置

     

    1.集群环境

    1.Linux服务器列表
    使用4台CentOS Linux服务器搭建环境，其IP地址如下：
    1. 192.168.110.100
    2. 192.168.110.101
    3. 192.168.110.102
    4. 192.168.110.103
    2.Redis服务部署环境
    192.168.110.100
    启动多个Redis sentinel服务，构成Redis sentinel集群
    192.168.110.101
    启动Redis服务，设置成主节点
    192.168.110.102
    启动Redis服务，设置成192.168.110.101的从节点
    192.168.110.103
    启动Redis服务，设置成192.168.110.101的从节点

    2.配置并启动Redis主从集群

    1.修改redis.conf配置文件
    主节点的redis配置文件使用默认的配置文件就可以了，从节点的redis配置文件修改如下：
    1. # Master-Slave replication. Use slaveof to make a Redis instance a copy of
    2. # another Redis server. A few things to understand ASAP about Redis replication.
    3. #
    4. # 1) Redis replication is asynchronous, but you can configure a master to
    5. # stop accepting writes if it appears to be not connected with at least
    6. # a given number of slaves.
    7. # 2) Redis slaves are able to perform a partial resynchronization with the
    8. # master if the replication link is lost for a relatively small amount of
    9. # time. You may want to configure the replication backlog size (see the next
    10. # sections of this file) with a sensible value depending on your needs.
    11. # 3) Replication is automatic and does not need user intervention. After a
    12. # network partition slaves automatically try to reconnect to masters
    13. # and resynchronize with them.
    14. #
    15. # 主从同步。通过 slaveof 配置来实现Redis实例的备份。
    16. # 注意，这里是本地从远端复制数据。也就是说，本地可以有不同的数据库文件、绑定不同的IP、监听不同的端口。
    17. #
    18. # slaveof <masterip> <masterport>
    19. slaveof 192.168.110.1016379
    注意:两台从节点都要改。
    2.启动Redis主从集群
    先启动192.168.110.101主节点，使用默认配置，脚本：
    1. [wch@localhost bin]$ ./redis-server
    再启动192.168.110.102和192.168.110.103从节点，使用刚才的配置，脚本：
    1. ./redis-server redis.conf
    3.查看集群
    192.168.110.101主节点Replication信息
    1. [wch@localhost bin]$ ./redis-cli -h 192.168.110.101 info Replication
    2. # Replication
    3. role:master
    4. connected_slaves:2
    5. slave0:ip=192.168.110.102,port=6379,state=online,offset=659,lag=1
    6. slave1:ip=192.168.110.103,port=6379,state=online,offset=659,lag=0
    7. master_repl_offset:659
    8. repl_backlog_active:1
    9. repl_backlog_size:1048576
    10. repl_backlog_first_byte_offset:2
    11. repl_backlog_histlen:658
    192.168.110.102从节点Replication信息
    1. [wch@localhost bin]$ ./redis-cli -h 192.168.110.102 info Replication
    2. # Replication
    3. role:slave
    4. master_host:192.168.110.101
    5. master_port:6379
    6. master_link_status:up
    7. master_last_io_seconds_ago:3
    8. master_sync_in_progress:0
    9. slave_repl_offset:701
    10. slave_priority:100
    11. slave_read_only:1
    12. connected_slaves:0
    13. master_repl_offset:0
    14. repl_backlog_active:0
    15. repl_backlog_size:1048576
    16. repl_backlog_first_byte_offset:0
    17. repl_backlog_histlen:0
    192.168.110.103从节点Replication信息
    1. [wch@localhost bin]$ ./redis-cli -h 192.168.110.103 info Replication
    2. # Replication
    3. role:slave
    4. master_host:192.168.110.101
    5. master_port:6379
    6. master_link_status:up
    7. master_last_io_seconds_ago:9
    8. master_sync_in_progress:0
    9. slave_repl_offset:715
    10. slave_priority:100
    11. slave_read_only:1
    12. connected_slaves:0
    13. master_repl_offset:0
    14. repl_backlog_active:0
    15. repl_backlog_size:1048576
    16. repl_backlog_first_byte_offset:0
    17. repl_backlog_histlen:0
    此时，存储到192.168.110.101主节点的数据，在从节点中都可以查询到。从节点会备份主节点的数据。

    3.配置sentinel集群并启动

    1.创建sentinel.conf配置文件
    1. port 26379
    2. # sentinel announce-ip <ip>
    3. # sentinel announce-port <port>
    4. dir /tmp
    6. ################################# master001 #################################
    7. sentinel monitor master001 192.168.110.10163792
    8. # sentinel auth-pass <master-name> <password>
    9. sentinel down-after-milliseconds master001 30000
    10. sentinel parallel-syncs master001 1
    11. sentinel failover-timeout master001 180000
    12. # sentinel notification-script <master-name> <script-path>
    13. # sentinel client-reconfig-script <master-name> <script-path>
    15. # 可以配置多个master节点
    16. ################################# master002 #################################
    配置文件说明：
    1. port :当前Sentinel服务运行的端口
     
    2. dir : Sentinel服务运行时使用的临时文件夹
     
    3.sentinel monitor master001 192.168.110.10163792:Sentinel去监视一个名为master001的主redis实例，这个主实例的IP地址为本机地址192.168.110.101，端口号为6379，而将这个主实例判断为失效至少需要2个 Sentinel进程的同意，只要同意Sentinel的数量不达标，自动failover就不会执行
     
    4.sentinel down-after-milliseconds master001 30000:指定了Sentinel认为Redis实例已经失效所需的毫秒数。当实例超过该时间没有返回PING，或者直接返回错误，那么Sentinel将这个实例标记为主观下线。只有一个 Sentinel进程将实例标记为主观下线并不一定会引起实例的自动故障迁移：只有在足够数量的Sentinel都将一个实例标记为主观下线之后，实例才会被标记为客观下线，这时自动故障迁移才会执行
     
    5.sentinel parallel-syncs master001 1：指定了在执行故障转移时，最多可以有多少个从Redis实例在同步新的主实例，在从Redis实例较多的情况下这个数字越小，同步的时间越长，完成故障转移所需的时间就越长
     
    6.sentinel failover-timeout master001 180000：如果在该时间（ms）内未能完成failover操作，则认为该failover失败
     
    7.sentinel notification-script <master-name> <script-path>：指定sentinel检测到该监控的redis实例指向的实例异常时，调用的报警脚本。该配置项可选，但是很常用
    2.启动sentinel集群
    创建3个sentinel.conf配置文件：sentinel001.conf、sentinel002.conf、sentinel003.conf并修改端口号分别为：26379、36379、46379，并启动服务：
    1. ./redis-sentinel sentinel001.conf
    2. ./redis-sentinel sentinel002.conf
    3. ./redis-sentinel sentinel003.conf
    启动三个sentinel服务后会在其控制台看到如下信息：
    ./redis-sentinel sentinel001.conf，端口：26379
    1. [7743]01Oct06:20:38.162# Sentinel runid is ba6c42e1accc31290e11d5876275e1562564295d
    2. [7743]01Oct06:20:38.162# +monitor master master001 192.168.110.101 6379 quorum 2
    3. [7743]01Oct06:20:39.110*+slave slave 192.168.110.102:6379192.168.110.1026379@ master001 192.168.110.1016379
    4. [7743]01Oct06:20:39.111*+slave slave 192.168.110.103:6379192.168.110.1036379@ master001 192.168.110.1016379
    5. [7743]01Oct06:25:07.595*+sentinel sentinel 192.168.110.100:36379192.168.110.10036379@ master001 192.168.110.1016379
    6. [7743]01Oct06:26:11.170*+sentinel sentinel 192.168.110.100:46379192.168.110.10046379@ master001 192.168.110.1016379
    ./redis-sentinel sentinel002.conf，端口：36379
    1. [7795]01Oct06:25:05.538# Sentinel runid is 52c14768b15837fb601b26328acf150c6bd30682
    2. [7795]01Oct06:25:05.538# +monitor master master001 192.168.110.101 6379 quorum 2
    3. [7795]01Oct06:25:06.505*+slave slave 192.168.110.102:6379192.168.110.1026379@ master001 192.168.110.1016379
    4. [7795]01Oct06:25:06.515*+slave slave 192.168.110.103:6379192.168.110.1036379@ master001 192.168.110.1016379
    5. [7795]01Oct06:25:07.557*+sentinel sentinel 192.168.110.100:26379192.168.110.10026379@ master001 192.168.110.1016379
    6. [7795]01Oct06:26:11.168*+sentinel sentinel 192.168.110.100:46379192.168.110.10046379@ master001 192.168.110.1016379
    ./redis-sentinel sentinel003.conf，端口：46379
    1. [7828]01Oct06:26:09.076# Sentinel runid is c8509594be4a36660b2122b3b81f4f74060c9b04
    2. [7828]01Oct06:26:09.076# +monitor master master001 192.168.110.101 6379 quorum 2
    3. [7828]01Oct06:26:10.063*+slave slave 192.168.110.102:6379192.168.110.1026379@ master001 192.168.110.1016379
    4. [7828]01Oct06:26:10.071*+slave slave 192.168.110.103:6379192.168.110.1036379@ master001 192.168.110.1016379
    5. [7828]01Oct06:26:11.516*+sentinel sentinel 192.168.110.100:26379192.168.110.10026379@ master001 192.168.110.1016379
    6. [7828]01Oct06:26:11.674*+sentinel sentinel 192.168.110.100:36379192.168.110.10036379@ master001 192.168.110.1016379
    每个sentinel服务能知道其他所有的服务！

    4.测试sentinel集群

    1.停止192.168.110.101主节点
    停止192.168.110.101Redis主节点后，在查看Replication信息如下：
    1. [wch@localhost bin]$ ./redis-cli -h 192.168.110.101 info Replication
    2. Could not connect to Redis at 192.168.110.101:6379:Connection refused
    4. [wch@localhost bin]$ ./redis-cli -h 192.168.110.102 info Replication
    5. # Replication
    6. role:slave
    7. master_host:192.168.110.103
    8. master_port:6379
    9. master_link_status:up
    10. master_last_io_seconds_ago:1
    11. master_sync_in_progress:0
    12. slave_repl_offset:29128
    13. slave_priority:100
    14. slave_read_only:1
    15. connected_slaves:0
    16. master_repl_offset:0
    17. repl_backlog_active:0
    18. repl_backlog_size:1048576
    19. repl_backlog_first_byte_offset:0
    20. repl_backlog_histlen:0
    22. [wch@localhost bin]$ ./redis-cli -h 192.168.110.103 info Replication
    23. # Replication
    24. role:master
    25. connected_slaves:1
    26. slave0:ip=192.168.110.102,port=6379,state=online,offset=30456,lag=1
    27. master_repl_offset:30456
    28. repl_backlog_active:1
    29. repl_backlog_size:1048576
    30. repl_backlog_first_byte_offset:2
    31. repl_backlog_histlen:30455
    32. [wch@localhost bin]$
    发现192.168.110.101Redis主节点已经不能连接，192.168.110.103成了主节点！
    2.再启动192.168.110.101主节点
    再启动192.168.110.101Redis主节点后，在查看Replication信息如下：
    1. ### 启动脚本，仍然使用默认配置
    2. [wch@localhost bin]$ ./redis-server
    4. [wch@localhost bin]$ ./redis-cli -h 192.168.110.101 info Replication
    5. # Replication
    6. role:slave
    7. master_host:192.168.110.103
    8. master_port:6379
    9. master_link_status:up
    10. master_last_io_seconds_ago:1
    11. master_sync_in_progress:0
    12. slave_repl_offset:57657
    13. slave_priority:100
    14. slave_read_only:1
    15. connected_slaves:0
    16. master_repl_offset:0
    17. repl_backlog_active:0
    18. repl_backlog_size:1048576
    19. repl_backlog_first_byte_offset:0
    20. repl_backlog_histlen:0
    21.  
    22. [wch@localhost bin]$ ./redis-cli -h 192.168.110.102 info Replication
    23. # Replication
    24. role:slave
    25. master_host:192.168.110.103
    26. master_port:6379
    27. master_link_status:up
    28. master_last_io_seconds_ago:0
    29. master_sync_in_progress:0
    30. slave_repl_offset:60751
    31. slave_priority:100
    32. slave_read_only:1
    33. connected_slaves:0
    34. master_repl_offset:0
    35. repl_backlog_active:0
    36. repl_backlog_size:1048576
    37. repl_backlog_first_byte_offset:0
    38. repl_backlog_histlen:0
    39.  
    40. [wch@localhost bin]$ ./redis-cli -h 192.168.110.103 info Replication
    41. # Replication
    42. role:master
    43. connected_slaves:2
    44. slave0:ip=192.168.110.102,port=6379,state=online,offset=63247,lag=1
    45. slave1:ip=192.168.110.101,port=6379,state=online,offset=63247,lag=1
    46. master_repl_offset:63393
    47. repl_backlog_active:1
    48. repl_backlog_size:1048576
    49. repl_backlog_first_byte_offset:2
    50. repl_backlog_histlen:63392
    51. [wch@localhost bin]$
    发现192.168.110.101节点启动后还再集群中，只不过成了从节点，192.168.110.103仍然是主节点，但是现在又有两个从节点了！
    3.只留下一个sentinel服务，再停止192.168.110.103主节点，查看Redis集群是否出现新的主节点
    停止sentinel服务，只留下一个sentinel服务，再停止Redis主节点，查看Replication信息如下：
    1. [wch@localhost bin]$ ./redis-cli -h 192.168.110.101 info Replication
    2. # Replication
    3. role:slave
    4. master_host:192.168.110.103
    5. master_port:6379
    6. master_link_status:down
    7. master_last_io_seconds_ago:-1
    8. master_sync_in_progress:0
    9. slave_repl_offset:184231
    10. master_link_down_since_seconds:43
    11. slave_priority:100
    12. slave_read_only:1
    13. connected_slaves:0
    14. master_repl_offset:0
    15. repl_backlog_active:0
    16. repl_backlog_size:1048576
    17. repl_backlog_first_byte_offset:0
    18. repl_backlog_histlen:0
    20. [wch@localhost bin]$ ./redis-cli -h 192.168.110.102 info Replication
    21. # Replication
    22. role:slave
    23. master_host:192.168.110.103
    24. master_port:6379
    25. master_link_status:down
    26. master_last_io_seconds_ago:-1
    27. master_sync_in_progress:0
    28. slave_repl_offset:184231
    29. master_link_down_since_seconds:52
    30. slave_priority:100
    31. slave_read_only:1
    32. connected_slaves:0
    33. master_repl_offset:0
    34. repl_backlog_active:0
    35. repl_backlog_size:1048576
    36. repl_backlog_first_byte_offset:0
    37. repl_backlog_histlen:0
    39. [wch@localhost bin]$ ./redis-cli -h 192.168.110.103 info Replication
    40. Could not connect to Redis at 192.168.110.103:6379:Connection refused
    发现192.168.110.103主节点已经不能连接了，也不存在Redis主节点，集群中无主节点了！！！分析原因是：sentinel.conf配置的sentinel monitor master001 192.168.110.10163792最后一个参数是2导致，若是但节点此配置的最后一个参数要使用是1。(此原因我已证实)
    注意：在生产环境下建议sentinel节点的数量能在3个以上，并且最好不要在同一台机器上(使用同一网卡)。
    -------------------------------------------------------------------------------------------------------------------------------
  • 相关阅读:
    selenium批量执行脚本操作
    Monkey压力测试操作步骤说明
    loadrunner整体压测执行操作步骤
    selenium3+python3.6爬页面源码的代码
    unittest_API自动化脚本应用
    Python3.7版本unittest框架添加用例的方法
    python3中报错：TypeError: 'range' object doesn't support item deletion
    构建Hadoop集群在线datanode不在线
    Nomodulenamed pip._internal怎么解决
    模拟登陆京东并访问我的订单
  • 原文地址：https://www.cnblogs.com/zxtceq/p/7344061.html
Copyright © 2020-2023  润新知