• Ubuntu搭建Http服务器用于下载Ubuntu文件


      首先安装Apache

    $ sudo apt-get install apache2

      Apache2的默认访问端口为80,当端口被占用时需要更改其访问端口

      进入apache2的安装目录  /etc/apache2/,修改器ports.conf文件

    # If you just change the port or add more ports here, you will likely also
    # have to change the VirtualHost statement in
    # /etc/apache2/sites-enabled/000-default.conf
    
    #Listen 80
    Listen 8001
    
    <IfModule ssl_module>
            Listen 443
    </IfModule>
    
    <IfModule mod_gnutls.c>
            Listen 443
    </IfModule>
    
    # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

      进入 目录 /etc/apache2/sites-available, 修改000-default.conf文件

    #<VirtualHost *:80>
    <VirtualHost *:8001>
            # The ServerName directive sets the request scheme, hostname and port that
            # the server uses to identify itself. This is used when creating
            # redirection URLs. In the context of virtual hosts, the ServerName
            # specifies what hostname must appear in the request's Host: header to
            # match this virtual host. For the default virtual host (this file) this
            # value is not decisive as it is used as a last resort host regardless.
            # However, you must set it for any further virtual host explicitly.
            #ServerName www.example.com
    
            ServerAdmin webmaster@localhost
            DocumentRoot /var/www/html
    
            # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
            # error, crit, alert, emerg.
            # It is also possible to configure the loglevel for particular
            # modules, e.g.
            #LogLevel info ssl:warn
    
            ErrorLog ${APACHE_LOG_DIR}/error.log
            CustomLog ${APACHE_LOG_DIR}/access.log combined
    
            # For most configuration files from conf-available/, which are
            # enabled or disabled at a global level, it is possible to
            # include a line for only one particular virtual host. For example the
            # following line enables the CGI configuration for this host only
            # after it has been globally disabled with "a2disconf".
            #Include conf-available/serve-cgi-bin.conf
    </VirtualHost>
    
    # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

      然后重启apache服务器

    $ sudo /etc/init.d/apache2 restart

      apache服务器的默认目录在/var/www/html,如果想利用http服务器下载文件,需要删除其index.html文件,然后把文件放在该目录即可

         

      但是点击以后又出现一个新问题

        

        You don't have permission to access /config on this server,意识到没有把文件压缩,它是打开了这个网页。把文件压缩就可以下载了

  • 相关阅读:
    基于FPGA的频率检测与LCD显示
    基于labview和fpga的信号发生器
    基于FPGA的直流电机
    基于FPGA的LDPC编译码器说明文档
    基于FPGA的dds发生器与lcd显示
    12th.Linux驱动程序开发
    11th.U-boot——代码结构分析(二)
    C语言中的函数指针
    10th.U-boot——代码结构分析(一)
    9th.U-boot——初识Bootloader
  • 原文地址:https://www.cnblogs.com/yuxiaoba/p/9937312.html
Copyright © 2020-2023  润新知