1.1 将镜像复制到本地创建yum源
1、将准备好的系统镜像放到指定的目录，本次目录指定在：/dawnfs/sourcecode
2、创建挂载目录：mkdir /mnt/yum
3、挂载镜像： mount -o loop /dawnfs/sourcecode/rhel-server-6.2-x86_64-dvd.iso /mnt/yum挂载完成后，使用 df -h来检查挂载是否成功：
4、修改/etc/yum.repos.d/local.repo文件
[local] name = Red Hat Yum Name baseurl=file:///aaa/CentOS-7.3-x86_64-DVD-1611 enabled=1 gpgcheck=0
ps:原文件中enabled=0,gpgcheck=1.修改成enable=1,gpgcheck=0。否则输入 yum grouplist 命令时会报错
5、清除原来的yum: yum clean all
6、检查软件列表：yum list
7、查看yum组：yum grouplist
8、安装yum组，以安装Desktop为例： yum install -y "Desktop"
1.2 将windows共享挂载到centos 7.3中并配置yum源
1、临时挂载windows共享
mount.cifs //1.1.1.100/share /aaa -o user=tom,pass=1
2、配置yum源文件
[local] name = Red Hat Yum Name baseurl=file:///aaa/CentOS-7.3-x86_64-DVD-1611 enabled=1 gpgcheck=0
1.3 配置centos网路yum源
cd /etc/yum.repos.d
# CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/os/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-5 #released updates [updates] name=CentOS-$releasever - Updates - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/updates/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-5 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-5 #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/addons/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/centosplus/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus gpgcheck=1 enabled=0 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-5 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/contrib/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib gpgcheck=1 enabled=0 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-5
# CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/os/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-6 #released updates [updates] name=CentOS-$releasever - Updates - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/updates/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-6 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras gpgcheck=1 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-6 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/centosplus/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus gpgcheck=1 enabled=0 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-6 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib - mirrors.ustc.edu.cn baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/contrib/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib gpgcheck=1 enabled=0 gpgkey=http://mirrors.ustc.edu.cn/centos/RPM-GPG-KEY-CentOS-6
# CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 #released updates [updates] name=CentOS-$releasever - Updates # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus # mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus baseurl=http://mirrors.ustc.edu.cn/centos/$releasever/centosplus/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
1.4 yum常用命令
yum provides */kinit # 列出kinit命令使用哪个安装包