• MGIT校赛


    F. Passing notes

    XL was very happy to see the satisfied faces of his classmates who ate the dog food. This time, he wanted to spread more dog food. The students are still sitting in an (n∗n) matrix, and XL, who is sitting in the top left corner, wants to pass k notes to LCY, who is sitting in the bottom right corner. At the same time, he wants the sum of the "hurt index" of all the students passing the k notes to be the highest.

    Attention! The same student will be immune to dog food after being shown to once and will not be harmed again.

    思路:

    费用流版子,注意多组输入。跑最大费用

    拆点,每个点拆成入点和出点,入点连一条容量 (1) 费用为 (-val) 的边加一条容量 (inf) 费用 (0) 的边

    #include<bits/stdc++.h>
    using namespace std;
    
    const int N = 1e6 + 10, inf = 1e8;
    
    int n, k, s, t;
    
    struct Edge {
    	int to, next, flow, cost;
    }E[N << 1];
    
    int tot, head[N];
    void addEdge(int from, int to, int flow, int cost) {
    	E[tot] = { to,head[from],flow,cost }; head[from] = tot++;
    	E[tot] = { from,head[to],0,-cost }; head[to] = tot++;
    }
    
    int vis[N], dis[N], incf[N], pre[N];
    
    bool spfa() {
    	queue<int>Q;
    	memset(vis, 0, sizeof vis);
    	memset(dis, 0x3f, sizeof dis);
    	Q.push(s); dis[s] = 0; vis[s] = 1; incf[s] = inf;
    	while (!Q.empty()) {
    		int u = Q.front(); Q.pop();
    		vis[u] = 0;
    
    		for (int i = head[u]; ~i; i = E[i].next) {
    			int v = E[i].to;
    			if (E[i].flow and dis[v] > dis[u] + E[i].cost) {
    				dis[v] = dis[u] + E[i].cost;
    				incf[v] = min(incf[u], E[i].flow);
    				pre[v] = i;
    				if (not vis[v])vis[v] = 1, Q.push(v);
    			}
    		}
    	}
    	return dis[t] != 0x3f3f3f3f;
    }
    
    void MCMF(int& flow, int& cost) {
    	flow = cost = 0;
    	while (spfa()) {
    		flow += incf[t];
    		cost += dis[t] * incf[t];
    		for (int i = t; i != s; i = E[pre[i] ^ 1].to) {
    			E[pre[i]].flow -= incf[t];
    			E[pre[i] ^ 1].flow += incf[t];
    		}
    	}
    }
    int main() {
    	while(~scanf("%d%d", &n, &k)){
            s = 0, t = 2 * n * n + 1;
            tot = 0;
            memset(head, -1, sizeof head);
            addEdge(s, 1, k, 0);
            addEdge(2 * n * n, t, k, 0);
    
            for (int i = 1; i <= n; i++) {
                for (int j = 1; j <= n; j++) {
                    int now = (i - 1) * n + j;
                    int x; scanf("%d", &x);
                    int a = now * 2 - 1, b = now * 2;
                    addEdge(a, b, 1, -x);
                    addEdge(a, b, inf, 0);
    
                    if (j < n)addEdge(b, b + 1, inf, 0);
                    if (i < n)addEdge(b, b + (n * 2) - 1, inf, 0);
                }
            }
    
            int flow, cost;
            MCMF(flow, cost);
            printf("%d
    ", -cost); 
        }
    }
    

    I. Prime

    牛客数列互质

    但是牛客上好像可以暴力过

    莫队,基本也是板子。

    这个链表整的有点技巧。

    这个得有些小技巧

    #include<bits/stdc++.h>
    #pragma GCC optimize(2)
    using namespace std;
    
    const int N = 1e5 + 10;
    
    int cnt[N], A[N], n, m, t, ans[N], mp[N];
    
    int pre[N], nxt[N], head, tail;
    void insert(int u) {
    	if (u <= head)return;
    	nxt[u] = nxt[head];
    	nxt[head] = u;
    	pre[u] = head;
    	pre[nxt[u]] = u;
    }
    
    void remove(int u) {
    	if (u <= head)return;
    	nxt[pre[u]] = nxt[u];
    	pre[nxt[u]] = pre[u];
    }
    
    int gcd(int a, int b) {
    
    	return a % b == 0 ? b : gcd(b, a % b);
    }
    struct node {
    	int l, r, k, id;
    }q[N];
    
    
    void ins(int x) {
    	if (--mp[cnt[x]] == 0)remove(cnt[x]);
    	if (++mp[++cnt[x]] == 1)insert(cnt[x]);
    }
    void del(int x) {
    	if (--mp[cnt[x]] == 0)remove(cnt[x]);
    	if (++mp[--cnt[x]] == 1)insert(cnt[x]);
    }
    
    int main() {
    	scanf("%d%d", &n, &m);
    	head = 0, tail = N - 1;
    	nxt[head] = tail;
    	pre[tail] = head;
    
    	t = sqrt(n);
    	for (int i = 1; i <= n; i++)scanf("%d", A + i);
    
    	for (int i = 1; i <= m; i++) {
    		scanf("%d%d%d", &q[i].l, &q[i].r, &q[i].k);
    		q[i].id = i;
    	}
    	sort(q + 1, q + 1 + m, [](node a, node b) {
    		int x = (a.l - 1) / t, y = (b.l - 1) / t;
            return (x ^ y) ? x < y : (x & 1) ? a.r < b.r : a.r > b.r;
    		//return x == y ? a.r < b.r : x < y;
    		});
    	int l = 1, r = 0;
    	for (int i = 1; i <= m; i++) {
    		int ql = q[i].l, qr = q[i].r, k = q[i].k;
    
    		while (l > q[i].l)
    			ins(A[--l]);
    		while (l < q[i].l)
    			del(A[l++]);
    		while (r > q[i].r)
    			del(A[r--]);
    		while (r < q[i].r)
    			ins(A[++r]);
    
    		int tot = 0;
    		for (int u = nxt[head]; u != tail; u = nxt[u]) {
    			if (gcd(u, k) == 1)tot += mp[u];
    		}
    		ans[q[i].id] = tot;
    	}
    	for (int i = 1; i <= m; i++) {
    		printf("%d
    ", ans[i]);
    	}
    }
    
  • 相关阅读:
    eclipse安装svn插件,在输入url后,一直卡在in progress界面不懂。
    android——背景颜色渐变(梯度变化)
    android——ObjectAnimator动画(一)
    android——ObjectAnimator动画
    android 无线调试
    android——字体颜色跟随状态改变
    爬虫基本原理
    java基础 数组
    java基础 方法
    java基础 流程控制和条件语句,循环语句
  • 原文地址:https://www.cnblogs.com/sduwh/p/13955351.html
Copyright © 2020-2023  润新知