本机安装的是TortoiseSVN-1.7.5.22551-win32-svn-1.7.3.msi
安装好后会在鼠标右键中出现如图最后两项的选项：
创建svn资源库：
1.首先是创建一个资源库文件夹，本例是sevenStar
如图：
2.在创建的文件夹sevenStar上右键，选择TortoiseSVN—>Create repository here选项
如图：
此时会出现一个对话框，如图：
@1 选择第一个按钮Create folder structure，会在sevenStar文件夹中创建svn所需要的默认的目录结构
创建成功会弹出如图的对话框：
创建成功之后确定即可
@2 选择第二个按钮Start Repobrowser，会浏览到本资源库的目录结构，同时可以设置远程访问资源库链接（URL）：svn://192.168.1.12/sevenStar，
以备在eclipse中下载上传
如图：
单击OK按钮即可设置好
3. 查看本资源库的设置是否成功
在sevenStar文件夹上右键，选择Check out...
如图：
就会弹出一个Checkout对话框
如图：
最上面的URL of repository:中的地址：svn://192.168.1.12/sevenStar就是我们刚才设置的
4.对本资源库进行配置
打开sevenStar文件夹有如图的目录结构：
打开配置文件夹conf，有authz,passwd,svnserve.conf三个文件
如图：
@1 打开authz文件修改：
在[groups]下添加sevenStar资源库对用户的访问权限
[groups]
[sevenStar:/]
* = rw
上面配置说明sevenStar资源库对所有用户具有读写访问权限
@2 打开passwd文件修改：
在本文件中[users]下添加用户和密码，格式是：用户 = 密码
[users]
# harry = harryssecret
# sally = sallyssecret
dev=dev
wbd=wbd
# harry = harryssecret
# sally = sallyssecret
dev=dev
wbd=wbd
如上，添加了dev用户，密码为dev
添加了wbd用户，密码为wbd
@3 打开svnserve.conf文件修改：
在本文件中进行访问权限设置
在[general]下把
anon-access = read
auth-access = write
password-db = passwd
auth-access = write
password-db = passwd
authz-db = authz
realm = My first repository
几项前的注释(#)去掉即可
[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = My First Repository
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = My First Repository
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none
以上就是在svn服务器端创建sevenStar资源库的详细步骤