• C语言函数--H






    函数名: harderr

    功 能: 建立一个硬件错误处理程序

    用 法: void harderr(int (*fptr)());

    程序例:

    /*This program will trap disk errors and prompt 
    the user for action. Try running it with no 
    disk in drive A: to invoke its functions.*/ 
    #include <stdio.h> 
    #include <conio.h> 
    #include <dos.h> 
    #define IGNORE  0 
    #define RETRY   1 
    #define ABORT   2 
    int buf[500]; 
    /*define the error messages for trapping disk problems*/ 
    static char *err_msg[] = { 
        "write protect", 
        "unknown unit", 
        "drive not ready", 
        "unknown command", 
        "data error (CRC)", 
        "bad request", 
        "seek error", 
        "unknown media type", 
        "sector not found", 
        "printer out of paper", 
        "write fault", 
        "read fault", 
        "general failure", 
        "reserved", 
        "reserved", 
        "invalid disk change" 
    }; 
    error_win(char *msg) 
    { 
       int retval; 
       cputs(msg); 
    /*prompt for user to press a key to abort, retry, ignore*/ 
       while(1) 
       { 
           retval= getch(); 
           if (retval == 'a' || retval == 'A') 
           { 
        retval = ABORT; 
        break; 
           } 
           if (retval == 'r' || retval == 'R') 
           { 
        retval = RETRY; 
        break; 
           } 
           if (retval == 'i' || retval == 'I') 
           { 
               retval = IGNORE; 
               break; 
           } 
       } 
       return(retval); 
    } 
    /*pragma warn -par reduces warnings which occur 
    due to the non use of the parameters errval, 
    bp and si to the handler.*/ 
    #pragma warn -par 
    int handler(int errval,int ax,int bp,int si) 
    { 
       static char msg[80]; 
       unsigned di; 
       int drive; 
       int errorno; 
       di= _DI; 
    /*if this is not a disk error then it was 
    another device having trouble*/ 
       if (ax < 0) 
       { 
          /* report the error */ 
          error_win("Device error"); 
          /* and return to the program directly requesting abort */ 
          hardretn(ABORT); 
       } 
    /* otherwise it was a disk error */ 
       drive = ax & 0x00FF; 
       errorno = di & 0x00FF; 
    /* report which error it was */ 
       sprintf(msg, "Error: %s on drive %c
    A)bort, R)etry, I)gnore: ", 
        err_msg[errorno], 'A' + drive); 
    /* 
    return to the program via dos interrupt 0x23 with abort, retry, 
    or ignore as input by the user. 
    */ 
       hardresume(error_win(msg)); 
       return ABORT; 
    } 
    #pragma warn +par 
    int main(void) 
    { 
    /* 
    install our handler on the hardware problem interrupt 
    */ 
       harderr(handler); 
       clrscr(); 
       printf("Make sure there is no disk in drive A:
    "); 
       printf("Press any key ....
    "); 
       getch(); 
       printf("Trying to access drive A:
    "); 
       printf("fopen returned %p
    ",fopen("A:temp.dat", "w")); 
       return 0; 
    } 
      
      
    
    

    函数名: hardresume

    功 能: 硬件错误处理函数

    用 法: void hardresume(int rescode);

    程序例:

      
    /* This program will trap disk errors and prompt the user for action. */ 
    /* Try running it with no disk in drive A: to invoke its functions    */ 
    #include <stdio.h> 
    #include <conio.h> 
    #include <dos.h> 
    #define IGNORE  0 
    #define RETRY   1 
    #define ABORT   2 
    int buf[500]; 
    /* define the error messages for trapping disk problems */ 
    static char *err_msg[] = { 
        "write protect", 
        "unknown unit", 
        "drive not ready", 
        "unknown command", 
        "data error (CRC)", 
        "bad request", 
        "seek error", 
        "unknown media type", 
        "sector not found", 
        "printer out of paper", 
        "write fault", 
        "read fault", 
        "general failure", 
        "reserved", 
        "reserved", 
        "invalid disk change" 
    }; 
    error_win(char *msg) 
    { 
       int retval; 
       cputs(msg); 
    /* prompt for user to press a key to abort, retry, ignore */ 
       while(1) 
       { 
           retval= getch(); 
           if (retval == 'a' || retval == 'A') 
           { 
               retval = ABORT; 
               break; 
           } 
           if (retval == 'r' || retval == 'R') 
           { 
               retval = RETRY; 
               break; 
           } 
           if (retval == 'i' || retval == 'I') 
           { 
               retval = IGNORE; 
               break; 
           } 
       } 
       return(retval); 
    } 
    /* pragma warn -par reduces warnings which occur due to the non use */ 
    /* of the parameters errval, bp and si to the handler.              */ 
    #pragma warn -par 
    int handler(int errval,int ax,int bp,int si) 
    { 
       static char msg[80]; 
       unsigned di; 
       int drive; 
       int errorno; 
       di= _DI; 
    /* if this is not a disk error then it was another device having trouble */ 
       if (ax < 0) 
       { 
          /* report the error */ 
          error_win("Device error"); 
          /* and return to the program directly 
          requesting abort */ 
          hardretn(ABORT); 
       } 
    /* otherwise it was a disk error */ 
       drive = ax & 0x00FF; 
       errorno = di & 0x00FF; 
    /* report which error it was */ 
       sprintf(msg, "Error: %s on drive %c
    A)bort, R)etry, I)gnore: ", 
               err_msg[errorno], 'A' + drive); 
    /* return to the program via dos interrupt 0x23 with abort, retry */ 
    /* or ignore as input by the user.  */ 
       hardresume(error_win(msg)); 
       return ABORT; 
    } 
    #pragma warn +par 
    int main(void) 
    { 
    /* install our handler on the hardware problem interrupt */ 
       harderr(handler); 
       clrscr(); 
       printf("Make sure there is no disk in drive A:
    "); 
       printf("Press any key ....
    "); 
       getch(); 
       printf("Trying to access drive A:
    "); 
       printf("fopen returned %p
    ",fopen("A:temp.dat", "w")); 
       return 0; 
    } 
      
      
    
    

    函数名: highvideo

    功 能: 选择高亮度文本字符

    用 法: void highvideo(void);

    程序例:

    #include <conio.h> 
    int main(void) 
    { 
       clrscr(); 
       lowvideo(); 
       cprintf("Low Intensity text
    "); 
       highvideo(); 
       gotoxy(1,2); 
       cprintf("High Intensity Text
    "); 
       return 0; 
    } 
      
      
    
    

    函数名: hypot

    功 能: 计算直角三角形的斜边长

    用 法: double hypot(double x, double y);

    程序例:

    #include <stdio.h> 
    #include <math.h> 
    int main(void) 
    { 
       double result; 
       double x = 3.0; 
       double y = 4.0; 
       result = hypot(x, y); 
       printf("The hypotenuse is: %lf
    ", result); 
       return 0; 
    } 
      
      
      
      
     
    
    



    书画小说软件 制作更满意的读、更舒心的写、更轻松的公布

    最全古典小说网 由本软件公布所得
  • 相关阅读:
    docker容器的时间同步
    Java中的各种bean对应的意义(VO,PO,BO,QO, DAO,POJO,DTO)
    Vue-admin工作整理(十九):从数字渐变组件谈第三方JS库Count-to的使用
    HTTP 方法:Get与Post分析
    Java核心知识盘点(三)- 框架篇-Spring
    Java核心知识盘点(二)- 缓存使用
    Java核心知识盘点(一)- 数据存储
    Java基础知识盘点(三)- 线程篇
    Java基础知识盘点(二)- 集合篇
    Java基础知识盘点(一)- 基础篇
  • 原文地址:https://www.cnblogs.com/mthoutai/p/7105463.html
Copyright © 2020-2023  润新知