【转】【OpenXml】OpenXml操作Word的一些操作总结

OpenXml相对于用MS提供的COM组件来生成WORD,有如下优势:

1.相对于MS 的COM组件,因为版本带来的不兼容问题,及各种会生成WORD半途会崩溃的问题.

2.对比填满一张30多页的WORD来说(包含图,表等),用COM组件来生成会占用20秒,Openxml1秒.

3.MS Word软件太贵了,你的客户装的是开源WORD,如LibreOffice,OpenOffice.这样你就只能用Openxml生成的WORD文档,各种支持MS Word都能打开,避免客户机器上安装MS Word.

简单来说OpenXml的各个操作.

首先用OpenXml打开一张报表.

public void CreateOpenXMLFile(string filePath)  
        {  
            using (WordprocessingDocument objWordDocument = WordprocessingDocument.Create(filePath, WordprocessingDocumentType.Document))  
            {  
                MainDocumentPart objMainDocumentPart = objWordDocument.AddMainDocumentPart();  
                objMainDocumentPart.Document = new Document(new Body());  
                Body objBody = objMainDocumentPart.Document.Body;  
                //创建一些需要用到的样式,如标题3,标题4,在OpenXml里面,这些样式都要自己来创建的   
                //ReportExport.CreateParagraphStyle(objWordDocument);  
                SectionProperties sectionProperties = new SectionProperties();  
                PageSize pageSize = new PageSize();  
                PageMargin pageMargin = new PageMargin();  
                Columns columns = new Columns() { Space = "220" };//720  
                DocGrid docGrid = new DocGrid() { LinePitch = 100 };//360  
                //创建页面的大小,页距,页面方向一些基本的设置,如A4,B4,Letter,   
                //GetPageSetting(PageSize,PageMargin);  
  
                //在这里填充各个Paragraph,与Table,页面上第一级元素就是段落,表格.  
                objBody.Append(new Paragraph());  
                objBody.Append(new Table());  
                objBody.Append(new Paragraph());  
  
                //我会告诉你这里的顺序很重要吗?下面才是把上面那些设置放到Word里去.(大家可以试试把这下面的代码放上面,会不会出现打开openxml文件有误,因为内容有误)  
                sectionProperties.Append(pageSize, pageMargin, columns, docGrid);  
                objBody.Append(sectionProperties);  
                  
                //如果有页眉,在这里添加页眉.  
                if (IsAddHead)  
                {  
                    //添加页面,如果有图片,这个图片和上面添加在objBody方式有点不一样,这里搞了好久.  
                    //ReportExport.AddHeader(objMainDocumentPart, image);  
                }  
                objMainDocumentPart.Document.Save();  
            }  
        }  

发现上面有点注解说错,那个顺序不影响Word,但是影响如LibreOffice软件打开后看到的格式不正确.改里面太麻烦,直接在这说了.

从这个总纲里,把上面的各个步骤再来仔细说下.

首先是在Openxml创建标题3,标题4.

// 为文档创建段落样式  

  public static void CreateParagraphStyle(WordprocessingDocument doc)  
        {  
            // 进入文档控制样式部分  
            StyleDefinitionsPart styleDefinitionsPart;  
            styleDefinitionsPart = doc.MainDocumentPart.AddNewPart<StyleDefinitionsPart>();  
            Styles root = new Styles();  
            root.Save(styleDefinitionsPart);  
  
            Styles styles = styleDefinitionsPart.Styles;  
            if (styles == null)  
            {  
                styleDefinitionsPart.Styles = new Styles();  
                styleDefinitionsPart.Styles.Save();  
            }  
  
            Style style3 = CreateTitleStyle(3);  
            Style style4 = CreateTitleStyle(4);  
            // 把样式添加入文档中  
            styles.Append(style3);  
            styles.Append(style4);  
        }  
  
        private static Style CreateTitleStyle(int titleIndex)  
        {  
            string titleID = titleIndex.ToString();  
            string rsid = string.Empty;  
            string before = string.Empty;  
            string after = string.Empty;  
            string line = string.Empty;  
            string val = string.Empty;  
            int outline = titleIndex - 1;  
            if (titleIndex == 3)  
            {  
                rsid = "00BA1E98";  
                before = "130";//"260"  
                after = "0";  
                line = "286";//"416"  
                val = "32";  
  
            }  
            else if (titleIndex == 4)  
            {  
                rsid = "00BA1E98";  
                before = "88";  
                after = "0";  
                line = "288";//"376"  
                val = "28";  
            }  
  
            Style style2 = new Style() { Type = StyleValues.Paragraph, StyleId = titleID };  
            StyleName styleName2 = new StyleName() { Val = "heading " + titleID };  
            BasedOn basedOn1 = new BasedOn() { Val = "a" };  
            NextParagraphStyle nextParagraphStyle1 = new NextParagraphStyle() { Val = "a" };  
            LinkedStyle linkedStyle1 = new LinkedStyle() { Val = titleID + "Char" };  
            UIPriority uIPriority1 = new UIPriority() { Val = 9 };  
            PrimaryStyle primaryStyle2 = new PrimaryStyle();  
            Rsid rsid2 = new Rsid() { Val = rsid };  
            style2.Append(styleName2);  
            style2.Append(basedOn1);  
            style2.Append(nextParagraphStyle1);  
            style2.Append(linkedStyle1);  
            style2.Append(uIPriority1);  
            style2.Append(primaryStyle2);  
            style2.Append(rsid2);  
  
            StyleParagraphProperties styleParagraphProperties2 = new StyleParagraphProperties();  
            KeepNext keepNext1 = new KeepNext();  
            KeepLines keepLines1 = new KeepLines();  
            SpacingBetweenLines spacingBetweenLines1 = new SpacingBetweenLines() { Before = before, After = after, Line = line, LineRule = LineSpacingRuleValues.Auto };  
            OutlineLevel outlineLevel1 = new OutlineLevel() { Val = outline };  
            styleParagraphProperties2.Append(keepNext1);  
            styleParagraphProperties2.Append(keepLines1);  
            styleParagraphProperties2.Append(spacingBetweenLines1);  
            styleParagraphProperties2.Append(outlineLevel1);  
            style2.Append(styleParagraphProperties2);  
  
            StyleRunProperties styleRunProperties1 = new StyleRunProperties();  
            Bold bold1 = new Bold();  
            BoldComplexScript boldComplexScript1 = new BoldComplexScript();  
            // Kern kern2 = new Kern() { Val = (UInt32)44U };  
            FontSize fontSize2 = new FontSize() { Val = val };  
            FontSizeComplexScript fontSizeComplexScript2 = new FontSizeComplexScript() { Val = val };  
            styleRunProperties1.Append(bold1);  
            styleRunProperties1.Append(boldComplexScript1);  
            //styleRunProperties1.Append(kern2);  
            styleRunProperties1.Append(fontSize2);  
            styleRunProperties1.Append(fontSizeComplexScript2);  
            style2.Append(styleRunProperties1);  
            return style2;  
        }  

然后是对页面大小,页面方向,页距设置.(懒的和报表里的一个个对应,里面的页距有很多大家可以精确设置.)

public static void GetPageSetting(ref PageSize pageSize, ref PageMargin pageMargin)  
        {  
            bool val = IsPaperOrientation;  
            string str_paperSize = "Letter";//A4,B4  
            UInt32Value width = 15840U;  
            UInt32Value height = 12240U;  
            int top = 1440;  
            UInt32Value left = 1440U;  
            if (str_paperSize == "A4")  
            {  
                width = 16840U;  
                height = 11905U;  
            }  
            else if (str_paperSize == "B4")  
            {  
                width = 20636U;  
                height = 14570U;  
            }  
  
            if (!val)  
            {  
                UInt32Value sweep = width;  
                width = height;  
                height = sweep;  
  
                int top_sweep = top;  
                top = (int)left.Value;  
                left = (uint)top_sweep;  
            }  
  
            pageSize.Width = width;  
            pageSize.Height = height;  
            pageSize.Orient = new EnumValue<PageOrientationValues>(val ? PageOrientationValues.Landscape : PageOrientationValues.Portrait);  
  
            pageMargin.Top = top;  
            pageMargin.Bottom = top;  
            pageMargin.Left = left;  
            pageMargin.Right = left;  
            pageMargin.Header = (UInt32Value)720U;  
            pageMargin.Footer = (UInt32Value)720U;  
            pageMargin.Gutter = (UInt32Value)0U;  
        }  

然后重点来了,大家对各元素如何在OpenXml添加的.

我先说下,在Openxml里相关元素的关系,在Word里,按一下Enter,转一行,对应的一行元素就是Paragraph,那如果一行文字在里面如何存放.Paragraph->Run->Text,图表Paragraph->Run->Drawing,表格Table->TableRow->TableCell->Paragraph->Run->Text与Drawing.在关系上说,还是很简洁的.来看一下具体的操作,我们先定义一个类.对应OpenXML里的基本样式设置.

public class ReportCommon  
    {  
        public const float defaultSize = 12f;  
        public const float H1 = 20f;  
        public const float H3 = 16f;  
        public const float H4 = 14f;  
        private string text = string.Empty;  
  
        public ReportCommon()  
        {  
            Alignment = -1;  
            Size = defaultSize;  
        }  
  
        //规定-1左对齐,0中间,1右对齐  
        public int Alignment { get; set; }  
  
        public virtual float Size { get; set; }  
  
        public string Text { get; set; }  
  
        public virtual bool IsBold { get; set; }  
    }  

其中我定义这个类的三个子类,分别是ReportValue:主要是这种A: B,ReportImage:包含一个图片的路径.ReportText:只有一个文本.

private static List<Run> GetRuns(ReportCommon common)  
        {  
            List<Run> runs = new List<Run>();  
            if (common is ReportValue)  
            {  
                ReportValue reportvalue = common as ReportValue;  
                Run r = new Run();  
                RunProperties rP = GetRunProperties(reportvalue, true);  
                r.Append(rP);  
                string text = reportvalue.Text;  
                if (text.EndsWith(":"))  
                    text = text + " ";  
                if (!text.EndsWith(": "))  
                    text = text + ": ";  
                Text t = CreateText(text);  
                r.Append(t);  
                runs.Add(r);  
  
                r = new Run();  
                rP = GetRunProperties(reportvalue, false);  
                r.Append(rP);  
                r.Append(CreateText(reportvalue.Value));  
                runs.Add(r);  
            }  
            else if (common is ReportImage)  
            {  
                ReportImage reportImage = common as ReportImage;  
                Run r = new Run();  
                RunProperties rP = GetRunProperties(reportImage);  
                Drawing image = GetImageToBody(reportImage.RId, reportImage.Width * 600, reportImage.Height * 800);  
                //Drawing image = new Drawing();  
                //image.Append(new A.Blip() { Embed = new StringValue(reportImage.RId) });  
                r.Append(rP);  
                r.Append(image);  
                runs.Add(r);  
            }  
            else if (common is ReportText)  
            {  
                Run r = new Run();  
                RunProperties rP = GetRunProperties(common);  
                r.Append(rP);  
                r.Append(CreateText(common.Text));  
                runs.Add(r);  
            }  
            return runs;  
        } 

看了这里,问题是不是越来越多.图片具体操作先不说.上面的RunProperties,与CreateText分别是指什么.

RunProperties是指包含这段Text,你要设置的一些字体大小,颜色,文本对齐设置.

而CreateText是因为我们在Openxml你在后面加个空格,而会给你过滤掉,空格要对应到XML的具体设置,看如下代码.

public static RunProperties GetRunProperties(ReportCommon common, bool bBold = false)  
        {  
            RunProperties rPr = new RunProperties();  
            //Color color = new Color() { Val = "FF0000" }; // the color is red  
            RunFonts rFont = new RunFonts();  
            rFont.Ascii = "Arial"; // the font is Arial  
            //rPr.Append(color);  
            //rPr.Append(rFont);  
            if (common.IsBold || bBold)  
                rPr.Append(new Bold()); // it is Bold  
            //TextAlignment   
            rPr.Append(new FontSize() { Val = new StringValue((common.Size * 2).ToString()) }); //font size (in 1/72 of an inch)  
            return rPr;  
        }  
  private static Text CreateText(string text)  
        {  
            if (text == null)  
                text = string.Empty;  
            Text t = new Text(text);  
            if (text.EndsWith(" "))  
            {  
                t.Space = new EnumValue<SpaceProcessingModeValues>(SpaceProcessingModeValues.Preserve);  
            }  
            if (text.StartsWith(" "))  
            {  
                t.Space = new EnumValue<SpaceProcessingModeValues>(SpaceProcessingModeValues.Default);  
            }  
            return t;  
        }  

不知这么多代码大家看烦没,因为我这人喜欢不是业务与大纲的事,都喜欢直接看代码来说,比人讲的清楚.所以讲的时候也喜欢,直接上代码.废话不说了,说下图片的问题,Openxml插入图片比较麻烦,先贴一段代码.

private static Drawing GetImageToBody(string relationshipId, int x = 914400, int y = 360000)  
        {  
            // Define the reference of the image.  
            var element =  
                 new Drawing(  
                     new DW.Inline(  
                         new DW.Extent() { Cx = x, Cy = y },  
                         new DW.EffectExtent()  
                         {  
                             LeftEdge = 0L,  
                             TopEdge = 0L,  
                             RightEdge = 0L,  
                             BottomEdge = 0L  
                         },  
                         new DW.DocProperties()  
                         {  
                             Id = (UInt32Value)1U,  
                             Name = "Picture 1"  
                         },  
                         new DW.NonVisualGraphicFrameDrawingProperties(  
                             new A.GraphicFrameLocks() { NoChangeAspect = true }),  
                         new A.Graphic(  
                             new A.GraphicData(  
                                 new PIC.Picture(  
                                     new PIC.NonVisualPictureProperties(  
                                         new PIC.NonVisualDrawingProperties()  
                                         {  
                                             Id = (UInt32Value)0U,  
                                             Name = "New Bitmap Image.jpg"  
                                         },  
                                         new PIC.NonVisualPictureDrawingProperties()),  
                                     new PIC.BlipFill(  
                                         new A.Blip(  
                                             new A.BlipExtensionList(  
                                                 new A.BlipExtension()  
                                                 {  
                                                     Uri =  
                                                       "{28A0092B-C50C-407E-A947-70E740481C1C}"  
                                                 })  
                                         )  
                                         {  
                                             Embed = relationshipId,  
                                             CompressionState =  
                                             A.BlipCompressionValues.Print  
                                         },  
                                         new A.Stretch(  
                                             new A.FillRectangle())),  
                                     new PIC.ShapeProperties(  
                                         new A.Transform2D(  
                                             new A.Offset() { X = 0L, Y = 0L },  
                                             new A.Extents() { Cx = x, Cy = y }),  
                                         new A.PresetGeometry(  
                                             new A.AdjustValueList()  
                                         ) { Preset = A.ShapeTypeValues.Rectangle }))  
                             ) { Uri = "http://schemas.openxmlformats.org/drawingml/2006/picture" })  
                     )  
                     {  
                         DistanceFromTop = (UInt32Value)0U,  
                         DistanceFromBottom = (UInt32Value)0U,  
                         DistanceFromLeft = (UInt32Value)0U,  
                         DistanceFromRight = (UInt32Value)0U,  
                         EditId = "50D07946"  
                     });  
            // Append the reference to body, the element should be in a Run.  
            var blip = element.Descendants<DocumentFormat.OpenXml.Drawing.Blip>()  
               .FirstOrDefault<DocumentFormat.OpenXml.Drawing.Blip>();  
            return element;  
        } 

这段代码里,东东比较多,大家主要看这一节, Embed = relationshipId,也是参数里要求传入的,我们可以这么理解,在OpenXML插入一张电脑的图片,插入数据到word后,word然后把保存这个图片的一个标识量给我们,让我们来用,就是relationshipId.说到这,我们好像还没看如何把一张路径下的图片插入word.如下

public static void CreateImageRid(ReportImage reportImage, MainDocumentPart objMainDocumentPart)  
        {  
            ImagePartType imagetype = ImagePartType.Jpeg;  
            FileInfo newImg = new FileInfo(reportImage.Value);  
            ImagePart newImgPart = objMainDocumentPart.AddImagePart(imagetype);  
            //插入图片数据到Word里去.  
            using (FileStream stream = newImg.OpenRead())  
            {  
                newImgPart.FeedData(stream);  
            }  
            //Word返回给我们插入数据的标识符.  
            reportImage.RId = objMainDocumentPart.GetIdOfPart(newImgPart);  
        }  

这里图片插入有先后关系,要先调用上面这段,插入数据到word,然后才能调用上上段的那段代码来生成Drawing元素.

大家如果要把图片的宽度,设为当前Word的可用宽度.Int32Value width = (int)(pageSize.Width - pageMargin.Right - pageMargin.Left);

好吧,大家会发现上上段那里的长度特大,这里发现这里的值要很大才能显现比较好看的图片,一般我在原来的基础宽度*600,基础长度*800.原因吗,我也不清楚,有些猜测,没有验证就不说了,这个要求OpenXML生成报表比较急,我把这几天所有操作先总结一下.后面再来修改,如果有知道的道友,不妨说一下.

在这里,文字与图片如何生成Paragraph就很简单了.

public static Paragraph GetParagraph(ReportCommon common)  
        {  
            Paragraph p = new Paragraph();  
            ParagraphProperties pPr = GetParagraphProperties(common);  
            p.Append(pPr);  
            List<Run> run = GetRuns(common);  
            foreach (var r in run)  
            {  
                p.Append(r);  
            }  
            return p;  
        }  

好吧,最后说到如何在OpenXML生成一张表.生成图表我用的基础数据是List<List<string>>,上面的ReportTable数据就放在这个里面.当然还有一些基本的定义属性就不说.具体如下看代码.

public static Table GetParagraph(ReportTable reportTable, Int32Value width)  
        {  
            Table table = new Table();  
            TableProperties tblProp = new TableProperties(  
                new TableBorders(  
                    new TopBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 },  
                    new BottomBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 },  
                    new LeftBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 },  
                    new RightBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 },  
                    new InsideHorizontalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 },  
                    new InsideVerticalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4 }  
                 )  
            );  
            tblProp.TableWidth = new TableWidth() { Width = width.ToString(), Type = TableWidthUnitValues.Dxa };  
            table.Append(tblProp);  
            int count = reportTable.Value.Count;  
            int cols = reportTable.Column;  
            int j = 0;  
            foreach (List<string> strs in reportTable.Value)  
            {  
                TableRow row = new TableRow();  
                for (int i = 0; i < cols; i++)  
                {  
                    TableCell cell = new TableCell();  
                    TableCellProperties tableCellProperties = new TableCellProperties();  
                    TableCellMargin margin = new TableCellMargin();  
                    margin.LeftMargin = new LeftMargin() { Width = "100", Type = TableWidthUnitValues.Dxa };  
                    margin.RightMargin = new RightMargin() { Width = "100", Type = TableWidthUnitValues.Dxa };  
                    tableCellProperties.Append(margin);  
                    Paragraph par = new Paragraph();  
                    Run run = new Run();  
                    if (j == 0 && reportTable.IsHaveColumn)  
                    {  
                        RunProperties rPr = new RunProperties();  
                        rPr.Append(new Bold());  
                        run.Append(rPr);  
                    }  
                    if (strs.Count != cols && i >= strs.Count - 1)  
                    {  
                        HorizontalMerge verticalMerge = new HorizontalMerge();  
                        if (i == strs.Count - 1)  
                        {  
                            RunProperties rPr = new RunProperties();  
                            rPr.Append(new Bold());  
                            run.Append(rPr);  
                            verticalMerge.Val = MergedCellValues.Restart;  
                            run.Append(CreateText(strs[i]));  
                        }  
                        else  
                        {  
                            verticalMerge.Val = MergedCellValues.Continue;  
                        }  
                        tableCellProperties.Append(verticalMerge);  
                    }  
                    else  
                    {  
                        run.Append(CreateText(strs[i]));  
                    }  
                    par.Append(run);  
                    cell.Append(tableCellProperties);  
                    cell.Append(par);  
                    row.Append(cell);  
                }  
                j++;  
                table.Append(row);  
            }  
  
            return table;  
        } 

代码可以简单的多,只是因为有一些要求,比如你表每行是5个数据,但是有一行,数据只有四个,有二个表格合并了,这里会默认把最后二格合并,具体意思大家可以改改代码看.

好吧,到这里,就差不多,元素添加完后,然后是把相关页面大小的设置加到objBody,最后是添加页眉. 

public static void AddHeader(MainDocumentPart mainDocPart, ReportImage reportImge)  
        {  
            // Delete the existing header parts.  
            mainDocPart.DeleteParts(mainDocPart.HeaderParts);  
  
            // Create a new header part and get its relationship id.  
            HeaderPart newHeaderPart = mainDocPart.AddNewPart<HeaderPart>();  
            string rId = mainDocPart.GetIdOfPart(newHeaderPart);  
              
            ImagePart imagepart = newHeaderPart.AddImagePart(ImagePartType.Jpeg);  
            FileInfo newImg = new FileInfo(reportImge.Value);  
            using (FileStream stream = newImg.OpenRead())  
            {  
                imagepart.FeedData(stream);  
            }  
            string imageRID = newHeaderPart.GetIdOfPart(imagepart);  
            reportImge.RId = imageRID;  
            Header header = GeneratePageHeaderPart(reportImge);  
            header.Save(newHeaderPart);  
              
            foreach (SectionProperties sectProperties in  
              mainDocPart.Document.Descendants<SectionProperties>())  
            {  
                //  Delete any existing references to headers.  
                foreach (HeaderReference headerReference in  
                  sectProperties.Descendants<HeaderReference>())  
                    sectProperties.RemoveChild(headerReference);  
                
                HeaderReference newHeaderReference =  
                  new HeaderReference() { Id = rId, Type = HeaderFooterValues.Default };  
                sectProperties.Append(newHeaderReference);  
            }  
            header.Save();  
        }  
  
        // Creates an header instance and adds its children.    
        private static Header GeneratePageHeaderPart(ReportImage reportImge)  
        {  
            var runs = GetRuns(reportImge);  
            Paragraph paragraph = new Paragraph();  
            paragraph.Append(GetParagraphProperties(reportImge));  
            foreach (var run in runs)  
            {  
                paragraph.Append(run);  
            }  
            paragraph.Append(new Run(new Text() { Text = "" }));  
            Header header = new Header();  
            header.Append(paragraph);  
            return header;  
        } 

上面的代码主要注意,Image所指的路径存放的和在前面的Document里不一样,这里存放在Header里,从Word文件解压来说,二都是不同的XML文档,你把图片数据写在Document里,得到的标识符在Header是空的.

好了.OpenXML的主要操作都在这了,但是大家如果想生成这种样式,应该如何处理?

上面每一个元素如Payload Mass (LBS): 0.22046,就是前面的ReportValue,如何以这种对齐方式来插入了?引入一个新的结构,ReportValueList,主要就是ReportValue的键表信息.

public static List<Paragraph> GetParagraph(ReportValueList valueList, Int32Value width, int column = 2)  
        {  
            if (column < 1)  
                column = 1;  
            List<Paragraph> list = new List<Paragraph>();  
            int currentcolumn = 0;  
            Paragraph currentParagraph = null;  
            foreach (var reportvalue in valueList.Values)  
            {  
                reportvalue.Size = valueList.Size;  
                if (currentcolumn == 0)  
                {  
                    currentParagraph = new Paragraph();  
                    ParagraphProperties pPr = new ParagraphProperties();  
                    //添加标签类  
                    Tabs tabs = new Tabs();  
                    Int32Value eachWidth = width / (new Int32Value(column));  
                    for (int i = 1; i < column; i++)  
                    {  
                        TabStop stop = new TabStop();  
                        stop.Val = new EnumValue<TabStopValues>(TabStopValues.Left);  
                        stop.Position = eachWidth * i;  
                        tabs.Append(stop);  
                    }  
                    pPr.Append(tabs);  
                    currentParagraph.Append(pPr);  
                    list.Add(currentParagraph);  
                }  
                List<Run> runs = GetRuns(reportvalue);  
                foreach (var run in runs)  
                {  
                    currentParagraph.Append(run);  
                }  
                currentcolumn++;  
                if (currentcolumn < column)  
                {  
                    Run run = new Run();  
                    run.Append(new TabChar());  
                    currentParagraph.Append(run);  
                }  
                if (currentcolumn >= column)  
                {  
                    currentcolumn = 0;  
                }  
            }  
            return list;  
        }

主要是对元素TabStop的运用,仔细的大家可以去查查文档

写到这里,忘记写要用到的命名空间.

using A = DocumentFormat.OpenXml.Drawing;  
using PIC = DocumentFormat.OpenXml.Drawing.Pictures;  
using DW = DocumentFormat.OpenXml.Drawing.Wordprocessing;  
using DocumentFormat.OpenXml;  
using DocumentFormat.OpenXml.Packaging;  
using DocumentFormat.OpenXml.Wordprocessing;  

这个就到这里了.下面如果有时间,我会讲一下,如果对整张报表来进行模版化,意思是在word里的每一个表,一个图片,一个文字,在软件上用生成的结果来替换相应的元素.

原文地址：https://blog.csdn.net/u011394397/article/details/78142860