一、K8S的ip地址
Node IP：节点设备的IP，如物理机，虚拟机等容器宿主的实际IP。
Pod IP：Pod的IP地址，是根据docker0网络IP段进行分配的。
Cluster IP：Service的IP，是一个虚拟IP，仅作用于service对象，由K8S管理和分配，需要结合service port才能使用，单独的IP没有通信功能，集群外访问需要一些修改。
在K8S集群内部，node ip、pod ip、clustere ip的通信机制是由k8s指定的路由规则，不是IP路由。
[root@linux-node1 ~]# kubectl get service NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.1.0.1 <none> 443/TCP 3h
二、Flannel网络部署
（1）为Flannel生成证书
[root@linux-node1 ssl]# vim flanneld-csr.json { "CN": "flanneld", "hosts": [], "key": { "algo": "rsa", "size": 2048 }, "names": [ { "C": "CN", "ST": "BeiJing", "L": "BeiJing", "O": "k8s", "OU": "System" } ] }
（2）生成证书
[root@linux-node1 ssl]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem > -ca-key=/opt/kubernetes/ssl/ca-key.pem > -config=/opt/kubernetes/ssl/ca-config.json > -profile=kubernetes flanneld-csr.json | cfssljson -bare flanneld [root@linux-node1 ssl]# ll flannel* -rw-r--r-- 1 root root 997 May 31 11:13 flanneld.csr -rw-r--r-- 1 root root 221 May 31 11:13 flanneld-csr.json -rw------- 1 root root 1675 May 31 11:13 flanneld-key.pem -rw-r--r-- 1 root root 1391 May 31 11:13 flanneld.pem
（3）分发证书
[root@linux-node1 ssl]# cp flanneld*.pem /opt/kubernetes/ssl/ [root@linux-node1 ssl]# scp flanneld*.pem 192.168.56.120:/opt/kubernetes/ssl/ flanneld-key.pem 100% 1675 127.2KB/s 00:00 flanneld.pem 100% 1391 308.3KB/s 00:00 [root@linux-node1 ssl]# scp flanneld*.pem 192.168.56.130:/opt/kubernetes/ssl/ flanneld-key.pem 100% 1675 291.1KB/s 00:00 flanneld.pem 100% 1391 90.4KB/s 00:00
（4）下载Flannel软件包
[root@linux-node1 ~]# cd /usr/local/src # wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz [root@linux-node1 src]# tar zxf flannel-v0.10.0-linux-amd64.tar.gz [root@linux-node1 src]# cp flanneld mk-docker-opts.sh /opt/kubernetes/bin/ 复制到linux-node2和linux-node3节点 [root@linux-node1 src]# scp flanneld mk-docker-opts.sh 192.168.56.120:/opt/kubernetes/bin/ [root@linux-node1 src]# scp flanneld mk-docker-opts.sh 192.168.56.130:/opt/kubernetes/bin/ 复制对应脚本到/opt/kubernetes/bin目录下。 [root@linux-node1 ~]# cd /usr/local/src/kubernetes/cluster/centos/node/bin/ [root@linux-node1 bin]# cp remove-docker0.sh /opt/kubernetes/bin/ [root@linux-node1 bin]# scp remove-docker0.sh 192.168.56.120:/opt/kubernetes/bin/ [root@linux-node1 bin]# scp remove-docker0.sh 192.168.56.130:/opt/kubernetes/bin/
（5）配置Flannel
[root@linux-node1 ~]# vim /opt/kubernetes/cfg/flannel FLANNEL_ETCD="-etcd-endpoints=https://192.168.56.110:2379,https://192.168.56.120:2379,https://192.168.56.130:2379" FLANNEL_ETCD_KEY="-etcd-prefix=/kubernetes/network" FLANNEL_ETCD_CAFILE="--etcd-cafile=/opt/kubernetes/ssl/ca.pem" FLANNEL_ETCD_CERTFILE="--etcd-certfile=/opt/kubernetes/ssl/flanneld.pem" FLANNEL_ETCD_KEYFILE="--etcd-keyfile=/opt/kubernetes/ssl/flanneld-key.pem" 复制配置到其它节点上 [root@linux-node1 ~]# scp /opt/kubernetes/cfg/flannel 192.168.56.120:/opt/kubernetes/cfg/ [root@linux-node1 ~]# scp /opt/kubernetes/cfg/flannel 192.168.56.130:/opt/kubernetes/cfg/
（6）设置Flannel系统服务
[root@linux-node1 ~]# vim /usr/lib/systemd/system/flannel.service [Unit] Description=Flanneld overlay address etcd agent After=network.target Before=docker.service [Service] EnvironmentFile=-/opt/kubernetes/cfg/flannel ExecStartPre=/opt/kubernetes/bin/remove-docker0.sh ExecStart=/opt/kubernetes/bin/flanneld ${FLANNEL_ETCD} ${FLANNEL_ETCD_KEY} ${FLANNEL_ETCD_CAFILE} ${FLANNEL_ETCD_CERTFILE} ${FLANNEL_ETCD_KEYFILE} ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -d /run/flannel/docker Type=notify [Install] WantedBy=multi-user.target RequiredBy=docker.service 复制系统服务脚本到其它节点上 # scp /usr/lib/systemd/system/flannel.service 192.168.56.120:/usr/lib/systemd/system/ # scp /usr/lib/systemd/system/flannel.service 192.168.56.130:/usr/lib/systemd/system/
三、Flannel CNI集成
（1）下载CNI插件
https://github.com/containernetworking/plugins/releases wget https://github.com/containernetworking/plugins/releases/download/v0.7.1/cni-plugins-amd64-v0.7.1.tgz [root@linux-node1 ~]# mkdir /opt/kubernetes/bin/cni [root@linux-node2 ~]# mkdir /opt/kubernetes/bin/cni [root@linux-node3 ~]# mkdir /opt/kubernetes/bin/cni [root@linux-node1 src]# tar zxf cni-plugins-amd64-v0.7.1.tgz -C /opt/kubernetes/bin/cni [root@linux-node1 src]# scp -r /opt/kubernetes/bin/cni/* 192.168.56.120:/opt/kubernetes/bin/cni/ [root@linux-node1 src]# scp -r /opt/kubernetes/bin/cni/* 192.168.56.130:/opt/kubernetes/bin/cni/
（2）创建Etcd的key
此步的操作是为了创建POD的网段，并在ETCD中存储，而后FLANNEL从ETCD中取出并进行分配
[root@linux-node1 src]# /opt/kubernetes/bin/etcdctl --ca-file /opt/kubernetes/ssl/ca.pem --cert-file /opt/kubernetes/ssl/flanneld.pem --key-file /opt/kubernetes/ssl/flanneld-key.pem --no-sync -C https://192.168.56.110:2379,https://192.168.56.120:2379,https://192.168.56.130:2379 mk /kubernetes/network/config '{ "Network": "10.2.0.0/16", "Backend": { "Type": "vxlan", "VNI": 1 }}' >/dev/null 2>&1
（3）启动flannel
[root@linux-node1 ~]# systemctl daemon-reload [root@linux-node1 ~]# systemctl enable flannel [root@linux-node1 ~]# chmod +x /opt/kubernetes/bin/* [root@linux-node1 ~]# systemctl start flannel [root@linux-node2 ~]# systemctl daemon-reload [root@linux-node2 ~]# systemctl enable flannel [root@linux-node2 ~]# chmod +x /opt/kubernetes/bin/* [root@linux-node2 ~]# systemctl start flannel [root@linux-node3 ~]# systemctl daemon-reload [root@linux-node3 ~]# systemctl enable flannel [root@linux-node3 ~]# chmod +x /opt/kubernetes/bin/* [root@linux-node3 ~]# systemctl start flannel
可以看到每个节点上会多出一个flannel.1的网卡，不同的节点都在不同网段。
[root@linux-node1 ~]# ifconfig flannel.1 flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1450 inet 10.2.46.0 netmask 255.255.255.255 broadcast 0.0.0.0 inet6 fe80::f4e6:1aff:fe7e:575b prefixlen 64 scopeid 0x20<link> ether f6:e6:1a:7e:57:5b txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 8 overruns 0 carrier 0 collisions 0 [root@linux-node2 ~]# ifconfig flannel.1 flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1450 inet 10.2.87.0 netmask 255.255.255.255 broadcast 0.0.0.0 inet6 fe80::d4e5:72ff:fe3e:7309 prefixlen 64 scopeid 0x20<link> ether d6:e5:72:3e:73:09 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 8 overruns 0 carrier 0 collisions 0 [root@linux-node3 ~]# ifconfig flannel.1 flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1450 inet 10.2.33.0 netmask 255.255.255.255 broadcast 0.0.0.0 ether be:cd:5a:4f:6b:d1 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 1 overruns 0 carrier 0 collisions 0
（4）遇到的问题：Flannel无法启动
检查/opt/kubernetes/cfg/etcd.conf配置文件中的ETCD_LISTEN_CLIENT_URLS是否配置监听127.0.0.1:2379。依旧无法启动flannel，重新输入了一遍，正常了，暂时没发现其他原因，至于etcdctl无法获取key值，有待研究!!!
四、配置Docker使用Flannel
[root@linux-node1 ~]# vim /usr/lib/systemd/system/docker.service [Unit] #在Unit下面修改After和增加Requires After=network-online.target firewalld.service flannel.service #让docker在flannel网络后面启动 Wants=network-online.target Requires=flannel.service [Service] #增加EnvironmentFile=-/run/flannel/docker Type=notify EnvironmentFile=-/run/flannel/docker #加载环境文件，设置docker0的ip地址为flannel分配的ip地址 ExecStart=/usr/bin/dockerd $DOCKER_OPTS [root@linux-node1 ~]# systemctl daemon-reload [root@linux-node1 ~]# systemctl restart docker [root@linux-node1 ~]# ifconfig docker0 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 10.2.46.1 netmask 255.255.255.0 broadcast 0.0.0.0 ether 02:42:1f:ef:9f:b5 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@linux-node2 ~]# ifconfig docker0 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 10.2.87.1 netmask 255.255.255.0 broadcast 0.0.0.0 ether 02:42:8a:a5:42:d7 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@linux-node3 ~]# ifconfig docker0 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 10.2.33.1 netmask 255.255.255.0 broadcast 0.0.0.0 ether 02:42:57:90:05:47 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
总结
在kubectl get node时，会看到节点的状态READY，如果状态为NotReady，可以查看节点上的kubelet是否已经启动，如果未启动，进行启动。kubelet无法启动，要进行查看systemctl status kubelet或journalctl -xe看看是什么原因导致无法启动。遇到的一种情况是依赖docker，查看docker无法启动。再进一步排查docker无法启动的原因。