一、前言
Tair支撑了淘宝几乎所有系统的缓存信息（Tair = Taobao Pair，Pair即Key-Value键值对），内置了三个存储引擎：mdb（默认，类似于Memcache）、rdb（类似于Redis）、ldb（高性能KV存储），其中前2者定位于cache缓存，ldb则定位于持久化存储。Tair属于分布式系统，由一个中心控制节点（Config Server）和一系列的服务节点（Data Server）组成，Config Server负责管理维护所有的Data Server状态信息。Data Server对外提供各种数据服务，并以心跳（Heartbeat）的形式将自身状况汇报给Config Server。Config Server是一个轻量级的控制点，可以采用Master-Slaver的形式来保证其可靠性，所有的Data Server地位都是等价的。持久化的数据存放于磁盘中，为了解决磁盘损坏导致的数据丢失, Tair可以配置数据的备份数目, 自动将一份数据的不同备份放到不同的主机上。
本文记录了详细的部署操作步骤（基于trunk版本），引用一张官方结构图，更多关于Tair的介绍请参照官方wiki（http://code.taobao.org/p/tair/wiki/intro/）。
二、安装Tair Server
1、系统环境：CentOS 6.5 （64位）
2、Tair Server 源码采用 C++ 编写，以下基于源码在linux环境下 make install
3、安装依赖包（感谢万能的yum）
1）wiki中描述需要安装依赖automake 、autoconfig、libtool库，实际CentOS6.5已经集成了以上lib，如果没有请通过yum获取
命令： “ yum install libtool ”
2）安装boost-devel库
命令： “ yum install boost-devel ”
3）安装gcc-c++
命令： “ yum install gcc-c++ ”
4、通过svn获取 tb-common-utils 和 Tair 源码
tb-common-utils 的 SVN地址： http://code.taobao.org/svn/tb-common-utils/trunk
Tair 的 SVN地址： http://code.taobao.org/svn/tair/trunk
5、将获取到的源码复制到当前用户目录，同时手工创建一个名称为“tairlib”文件夹，作为相关lib文件的安装路径，结构如下
6、安装tb-common-utils库，从命名可以看出应该是taobao内部开发的公共库
1）通过终端进入tb-common-utils文件夹，切换到root账号
2）给build.sh 脚本文件增加可执行X权限，否则可能会提示“权限不够”
命令： “ chmod +x build.sh ”
3）创建环境变量TBLIB_ROOT指示相关lib文件的安装路径，指向之前创建的tairlib文件夹
注意这个是会话级的变量，如果中间关闭终端需要重新export
命令： export TBLIB_ROOT="/home/glf/tairlib"
4）执行build.sh脚本。
5）至此tb-common-utils库安装完毕。
7、安装tair
1）切换进入tair文件夹，如果是重新打开的终端窗口，请切换到root账号，同时参照6.3使用同样的命令创建环境变量，tair的安装同样需要这个环境变量
2）给bootstrap.sh 脚本文件增加可执行X权限，否则可能提示“权限不够"
命令： “ chmod +x bootstrap.sh ”
3）执行 bootstrap.sh 脚本
4）执行 configure
5）执行 make
6）执行 make install ，安装成功后会把tair安装到 /root/tair_bin ，至此安装tair 服务器完毕。
因为使用的root账号安装，所以安装目录为/root，但如果使用当前用户在安装过程会提示权限问题，麻烦知道怎么解决的请告之。
三、Tair Server的配置
1、由于机器网络环境复杂，本文仅以一台机器不同端口号模拟分布式集群部署，如果多机器部署端口可以一致，只需要修改IP即可。
| 名称 | IP | 端口 |
| Config Server（Master） | 10.0.2.15 | 5198 |
| Config Server（Slaver） | 10.0.2.15 | 5200 |
| Data Server A | 10.0.2.15 | 5191 |
| Data Server B | 10.0.2.15 | 5192 |
关于IP、端口如何配置请参照下面的conf文件，但需要注意的是Config Server的心跳端口（Heartbeat Port）为Port+1，
例如Port=5198那么Heartbeat Port默认=5199，所以在配置其他端口的时候注意预留，不要重复。
2、CP 4份tair_bin文件夹，依次重命名如下图，后面都在4个CP的目录修改配置，原tair_bin保留不作任何修改（ 好不容易才装起来的呀：） ）。
tair_bin_cs1：作为Config Server（Master）目录
tair_bin_cs2：作为Config Server（Slaver）目录
tair_bin_ds1：作为Data Server A 目录
tair_bin_ds2：作为Data Server B 目录
3、依次在CP的4个目录下创建（mkdir） data 和 logs 文件夹，用于设置相关配置文件中的路径（不确定是否必须，也有可能服务启动的时候会根据conf设置的路径自动创建）
4、每个Server的etc 目录下都包含以下文件（安装时创建的sample文件），相关文件中已经存在对应的配置项解释说明，
同时可以参照wiki的解释：http://code.taobao.org/p/tair/wiki/deploy
“configserver.conf.default” （Config Server使用）
“dataserver.conf.default” （Data Server使用）
“group.conf.default” （Config Server使用）
“invalserver.conf.default” （暂未使用）
5、配置Config Server
1）在 tair_bin_cs1 和 tair_bin_cs2 的etc目录下将 “configserver.conf.default” 重命名为“configserver.conf”，将“group.conf.default”重命名为“group.conf”，作为服务器的正式配置文件。
2）打开 tair_bin_cs1etcconfigserver.conf 参照如下代码进行配置，其中第一行config_server为master服务器，第二行为slaver服务器，
使用绝对路径修改 log_file、pid_file、goup_file、data_dir 目录，使用 ifconfig 命名查看当前网卡的dev_name和ip，以下修改过的内容用红色字体标识。
（插曲：因为dev_name默认为eth0，我机器实际为eth1，一度陷入了绝境）
#
# tair 2.3 --- configserver config
#
[public]
config_server=10.0.2.15:5198
config_server=10.0.2.15:5200
[configserver]
port=5198
log_file=/root/tair_bin_cs1/logs/config.log
pid_file=/root/tair_bin_cs1/logs/config.pid
log_level=warn
group_file=/root/tair_bin_cs1/etc/group.conf
data_dir=/root/tair_bin_cs1/data/data
dev_name=eth1
3）在 tair_bin_cs1etcgroup.conf 参照如下代码进行配置，主要用于注册DataSever服务器的IP和Port
#group name
[group_1]
# data move is 1 means when some data serve down, the migrating will be start.
# default value is 0
_data_move=0
#_min_data_server_count: when data servers left in a group less than this value, config server will stop serve for this group
#default value is copy count.
_min_data_server_count=1
#_plugIns_list=libStaticPlugIn.so
_build_strategy=1 #1 normal 2 rack
_build_diff_ratio=0.6 #how much difference is allowd between different rack
# diff_ratio = |data_sever_count_in_rack1 - data_server_count_in_rack2| / max (data_sever_count_in_rack1, data_server_count_in_rack2)
# diff_ration must less than _build_diff_ratio
_pos_mask=65535 # 65535 is 0xffff this will be used to gernerate rack info. 64 bit serverId & _pos_mask is the rack info,
_copy_count=1
_bucket_number=1023
# accept ds strategy. 1 means accept ds automatically
_accept_strategy=1
# data center A
_server_list=10.0.2.15:5191
_server_list=10.0.2.15:5192
#quota info
_areaCapacity_list=0,1124000;
4）Config Server（Slave）的配置也基本一致，注意修改conf文件中的路径、ip
configserver.conf 参照如下：
# # tair 2.3 --- configserver config # [public] config_server=10.0.2.15:5198 config_server=10.0.2.15:5200 [configserver] port=5200 log_file=/root/tair_bin_cs2/logs/config.log pid_file=/root/tair_bin_cs2/logs/config.pid log_level=warn group_file=/root/tair_bin_cs2/etc/group.conf data_dir=/root/tair_bin_cs2/data/data dev_name=eth1
group.conf 参照如下：
#group name [group_1] # data move is 1 means when some data serve down, the migrating will be start. # default value is 0 _data_move=0 #_min_data_server_count: when data servers left in a group less than this value, config server will stop serve for this group #default value is copy count. _min_data_server_count=1 #_plugIns_list=libStaticPlugIn.so _build_strategy=1 #1 normal 2 rack _build_diff_ratio=0.6 #how much difference is allowd between different rack # diff_ratio = |data_sever_count_in_rack1 - data_server_count_in_rack2| / max (data_sever_count_in_rack1, data_server_count_in_rack2) # diff_ration must less than _build_diff_ratio _pos_mask=65535 # 65535 is 0xffff this will be used to gernerate rack info. 64 bit serverId & _pos_mask is the rack info, _copy_count=1 _bucket_number=1023 # accept ds strategy. 1 means accept ds automatically _accept_strategy=1 # data center A _server_list=10.0.2.15:5191 _server_list=10.0.2.15:5192 #quota info _areaCapacity_list=0,1124000;
5）至此2台 Config Server 配置完毕
6、配置Data Server（默认为 mdb 引擎）
1）在2个Data Server的 etc 目录下将 “dataserver.conf.default” 重命名为“dataserver.conf”，作为服务器的正式配置文件
2）打开 tair_bin_ds1etcdataserver.conf 参照如下代码进行修改配置，注意[public]节点的2行config_server必须和configserver上的配置保持一致
# # tair 2.3 --- tairserver config # [public] config_server=10.0.2.15:5198 config_server=10.0.2.15:5200 [tairserver] # #storage_engine: # # mdb # kdb # ldb # storage_engine=mdb local_mode=0 # #mdb_type: # mdb # mdb_shm # mdb_type=mdb_shm # # if you just run 1 tairserver on a computer, you may ignore this option. # if you want to run more than 1 tairserver on a computer, each tairserver must have their own "mdb_shm_path" # # mdb_shm_path=/mdb_shm_path01 #tairserver listen port port=5191 heartbeat_port=6191 process_thread_num=16 # #mdb size in MB # slab_mem_size=1024 log_file=/root/tair_bin_ds1/logs/server.log pid_file=/root/tair_bin_ds1/logs/server.pid log_level=warn dev_name=eth1 ulog_dir=/root/tair_bin_ds1/data/ulog ulog_file_number=3 ulog_file_size=64 check_expired_hour_range=2-4 check_slab_hour_range=5-7 dup_sync=1 do_rsync=0 # much resemble json format # one local cluster config and one or multi remote cluster config. # {local:[master_cs_addr,slave_cs_addr,group_name,timeout_ms,queue_limit],remote:[...],remote:[...]} rsync_conf={local:[10.0.0.1:5198,10.0.0.2:5198,group_local,2000,1000],remote:[10.0.1.1:5198,10.0.1.2:5198,group_remote,2000,3000]} # if same data can be updated in local and remote cluster, then we need care modify time to # reserve latest update when do rsync to each other. rsync_mtime_care=0 # rsync data directory(retry_log/fail_log..) rsync_data_dir=/root/tair_bin_ds1/data/remote # max log file size to record failed rsync data, rotate to a new file when over the limit rsync_fail_log_size=30000000 # whether do retry when rsync failed at first time rsync_do_retry=0 # when doing retry, size limit of retry log's memory use rsync_retry_log_mem_size=100000000 [fdb] # in MB index_mmap_size=30 cache_size=256 bucket_size=10223 free_block_pool_size=8 data_dir=/root/tair_bin_ds1/data/fdb fdb_name=tair_fdb [kdb] # in byte map_size=10485760 # the size of the internal memory-mapped region bucket_size=1048583 # the number of buckets of the hash table record_align=128 # the power of the alignment of record size data_dir=/root/tair_bin_ds1/data/kdb # the directory of kdb's data [ldb] #### ldb manager config ## data dir prefix, db path will be data/ldbxx, "xx" means db instance index. ## so if ldb_db_instance_count = 2, then leveldb will init in ## /data/ldb1/ldb/, /data/ldb2/ldb/. We can mount each disk to ## data/ldb1, data/ldb2, so we can init each instance on each disk. data_dir=/root/tair_bin_ds1/data/ldb ## leveldb instance count, buckets will be well-distributed to instances ldb_db_instance_count=1 ## whether load backup version when startup. ## backup version may be created to maintain some db data of specifid version. ldb_load_backup_version=0 ## whether support version strategy. ## if yes, put will do get operation to update existed items's meta info(version .etc), ## get unexist item is expensive for leveldb. set 0 to disable if nobody even care version stuff. ldb_db_version_care=1 ## time range to compact for gc, 1-1 means do no compaction at all ldb_compact_gc_range = 3-6 ## backgroud task check compact interval (s) ldb_check_compact_interval = 120 ## use cache count, 0 means NOT use cache,`ldb_use_cache_count should NOT be larger ## than `ldb_db_instance_count, and better to be a factor of `ldb_db_instance_count. ## each cache mdb's config depends on mdb's config item(mdb_type, slab_mem_size, etc) ldb_use_cache_count=1 ## cache stat can't report configserver, record stat locally, stat file size. ## file will be rotate when file size is over this. ldb_cache_stat_file_size=20971520 ## migrate item batch size one time (1M) ldb_migrate_batch_size = 3145728 ## migrate item batch count. ## real batch migrate items depends on the smaller size/count ldb_migrate_batch_count = 5000 ## comparator_type bitcmp by default # ldb_comparator_type=numeric ## numeric comparator: special compare method for user_key sorting in order to reducing compact ## parameters for numeric compare. format: [meta][prefix][delimiter][number][suffix] ## skip meta size in compare # ldb_userkey_skip_meta_size=2 ## delimiter between prefix and number # ldb_userkey_num_delimiter=: #### ## use blommfilter ldb_use_bloomfilter=1 ## use mmap to speed up random acess file(sstable),may cost much memory ldb_use_mmap_random_access=0 ## how many highest levels to limit compaction ldb_limit_compact_level_count=0 ## limit compaction ratio: allow doing one compaction every ldb_limit_compact_interval ## 0 means limit all compaction ldb_limit_compact_count_interval=0 ## limit compaction time interval ## 0 means limit all compaction ldb_limit_compact_time_interval=0 ## limit compaction time range, start == end means doing limit the whole day. ldb_limit_compact_time_range=6-1 ## limit delete obsolete files when finishing one compaction ldb_limit_delete_obsolete_file_interval=5 ## whether trigger compaction by seek ldb_do_seek_compaction=0 ## whether split mmt when compaction with user-define logic(bucket range, eg) ldb_do_split_mmt_compaction=0 #### following config effects on FastDump #### ## when ldb_db_instance_count > 1, bucket will be sharded to instance base on config strategy. ## current supported: ## hash : just do integer hash to bucket number then module to instance, instance's balance may be ## not perfect in small buckets set. same bucket will be sharded to same instance ## all the time, so data will be reused even if buckets owned by server changed(maybe cluster has changed), ## map : handle to get better balance among all instances. same bucket may be sharded to different instance based ## on different buckets set(data will be migrated among instances). ldb_bucket_index_to_instance_strategy=map ## bucket index can be updated. this is useful if the cluster wouldn't change once started ## even server down/up accidently. ldb_bucket_index_can_update=1 ## strategy map will save bucket index statistics into file, this is the file's directory ldb_bucket_index_file_dir=/root/tair_bin_ds1/data/bindex ## memory usage for memtable sharded by bucket when batch-put(especially for FastDump) ldb_max_mem_usage_for_memtable=3221225472 #### #### leveldb config (Warning: you should know what you're doing.) ## one leveldb instance max open files(actually table_cache_ capacity, consider as working set, see `ldb_table_cache_size) ldb_max_open_files=65535 ## whether return fail when occure fail when init/load db, and ## if true, read data when compactiong will verify checksum ldb_paranoid_check=0 ## memtable size ldb_write_buffer_size=67108864 ## sstable size ldb_target_file_size=8388608 ## max file size in each level. level-n (n > 0): (n - 1) * 10 * ldb_base_level_size ldb_base_level_size=134217728 ## sstable's block size # ldb_block_size=4096 ## sstable cache size (override `ldb_max_open_files) ldb_table_cache_size=1073741824 ##block cache size ldb_block_cache_size=16777216 ## arena used by memtable, arena block size #ldb_arenablock_size=4096 ## key is prefix-compressed period in block, ## this is period length(how many keys will be prefix-compressed period) # ldb_block_restart_interval=16 ## specifid compression method (snappy only now) # ldb_compression=1 ## compact when sstables count in level-0 is over this trigger ldb_l0_compaction_trigger=1 ## write will slow down when sstables count in level-0 is over this trigger ## or sstables' filesize in level-0 is over trigger * ldb_write_buffer_size if ldb_l0_limit_write_with_count=0 ldb_l0_slowdown_write_trigger=32 ## write will stop(wait until trigger down) ldb_l0_stop_write_trigger=64 ## when write memtable, max level to below maybe ldb_max_memcompact_level=3 ## read verify checksum ldb_read_verify_checksums=0 ## write sync log. (one write will sync log once, expensive) ldb_write_sync=0 ## bits per key when use bloom filter #ldb_bloomfilter_bits_per_key=10 ## filter data base logarithm. filterbasesize=1<<ldb_filter_base_logarithm #ldb_filter_base_logarithm=12
3）另一台DataServer的配置基本一致，参照如下代码
注意：由于属于单机部署多个DataServer，需要修改mdb_shm_path=/mdb_shm_path02，（ps：这点我开始没留意导致每次启动一个dataserver的时候另一台自动shutdown）
# # tair 2.3 --- tairserver config # [public] config_server=10.0.2.15:5198 config_server=10.0.2.15:5200 [tairserver] # #storage_engine: # # mdb # kdb # ldb # storage_engine=mdb local_mode=0 # #mdb_type: # mdb # mdb_shm # mdb_type=mdb_shm # # if you just run 1 tairserver on a computer, you may ignore this option. # if you want to run more than 1 tairserver on a computer, each tairserver must have their own "mdb_shm_path" # # mdb_shm_path=/mdb_shm_path02 #tairserver listen port port=5192 heartbeat_port=6192 process_thread_num=16 # #mdb size in MB # slab_mem_size=1024 log_file=/root/tair_bin_ds2/logs/server.log pid_file=/root/tair_bin_ds2/logs/server.pid log_level=warn dev_name=eth1 ulog_dir=/root/tair_bin_ds2/data/ulog ulog_file_number=3 ulog_file_size=64 check_expired_hour_range=2-4 check_slab_hour_range=5-7 dup_sync=1 do_rsync=0 # much resemble json format # one local cluster config and one or multi remote cluster config. # {local:[master_cs_addr,slave_cs_addr,group_name,timeout_ms,queue_limit],remote:[...],remote:[...]} rsync_conf={local:[10.0.0.1:5198,10.0.0.2:5198,group_local,2000,1000],remote:[10.0.1.1:5198,10.0.1.2:5198,group_remote,2000,3000]} # if same data can be updated in local and remote cluster, then we need care modify time to # reserve latest update when do rsync to each other. rsync_mtime_care=0 # rsync data directory(retry_log/fail_log..) rsync_data_dir=/root/tair_bin_ds2/data/remote # max log file size to record failed rsync data, rotate to a new file when over the limit rsync_fail_log_size=30000000 # whether do retry when rsync failed at first time rsync_do_retry=0 # when doing retry, size limit of retry log's memory use rsync_retry_log_mem_size=100000000 [fdb] # in MB index_mmap_size=30 cache_size=256 bucket_size=10223 free_block_pool_size=8 data_dir=/root/tair_bin_ds2/data/fdb fdb_name=tair_fdb [kdb] # in byte map_size=10485760 # the size of the internal memory-mapped region bucket_size=1048583 # the number of buckets of the hash table record_align=128 # the power of the alignment of record size data_dir=/root/tair_bin_ds2/data/kdb # the directory of kdb's data [ldb] #### ldb manager config ## data dir prefix, db path will be data/ldbxx, "xx" means db instance index. ## so if ldb_db_instance_count = 2, then leveldb will init in ## /data/ldb1/ldb/, /data/ldb2/ldb/. We can mount each disk to ## data/ldb1, data/ldb2, so we can init each instance on each disk. data_dir=/root/tair_bin_ds2/data/ldb ## leveldb instance count, buckets will be well-distributed to instances ldb_db_instance_count=1 ## whether load backup version when startup. ## backup version may be created to maintain some db data of specifid version. ldb_load_backup_version=0 ## whether support version strategy. ## if yes, put will do get operation to update existed items's meta info(version .etc), ## get unexist item is expensive for leveldb. set 0 to disable if nobody even care version stuff. ldb_db_version_care=1 ## time range to compact for gc, 1-1 means do no compaction at all ldb_compact_gc_range = 3-6 ## backgroud task check compact interval (s) ldb_check_compact_interval = 120 ## use cache count, 0 means NOT use cache,`ldb_use_cache_count should NOT be larger ## than `ldb_db_instance_count, and better to be a factor of `ldb_db_instance_count. ## each cache mdb's config depends on mdb's config item(mdb_type, slab_mem_size, etc) ldb_use_cache_count=1 ## cache stat can't report configserver, record stat locally, stat file size. ## file will be rotate when file size is over this. ldb_cache_stat_file_size=20971520 ## migrate item batch size one time (1M) ldb_migrate_batch_size = 3145728 ## migrate item batch count. ## real batch migrate items depends on the smaller size/count ldb_migrate_batch_count = 5000 ## comparator_type bitcmp by default # ldb_comparator_type=numeric ## numeric comparator: special compare method for user_key sorting in order to reducing compact ## parameters for numeric compare. format: [meta][prefix][delimiter][number][suffix] ## skip meta size in compare # ldb_userkey_skip_meta_size=2 ## delimiter between prefix and number # ldb_userkey_num_delimiter=: #### ## use blommfilter ldb_use_bloomfilter=1 ## use mmap to speed up random acess file(sstable),may cost much memory ldb_use_mmap_random_access=0 ## how many highest levels to limit compaction ldb_limit_compact_level_count=0 ## limit compaction ratio: allow doing one compaction every ldb_limit_compact_interval ## 0 means limit all compaction ldb_limit_compact_count_interval=0 ## limit compaction time interval ## 0 means limit all compaction ldb_limit_compact_time_interval=0 ## limit compaction time range, start == end means doing limit the whole day. ldb_limit_compact_time_range=6-1 ## limit delete obsolete files when finishing one compaction ldb_limit_delete_obsolete_file_interval=5 ## whether trigger compaction by seek ldb_do_seek_compaction=0 ## whether split mmt when compaction with user-define logic(bucket range, eg) ldb_do_split_mmt_compaction=0 #### following config effects on FastDump #### ## when ldb_db_instance_count > 1, bucket will be sharded to instance base on config strategy. ## current supported: ## hash : just do integer hash to bucket number then module to instance, instance's balance may be ## not perfect in small buckets set. same bucket will be sharded to same instance ## all the time, so data will be reused even if buckets owned by server changed(maybe cluster has changed), ## map : handle to get better balance among all instances. same bucket may be sharded to different instance based ## on different buckets set(data will be migrated among instances). ldb_bucket_index_to_instance_strategy=map ## bucket index can be updated. this is useful if the cluster wouldn't change once started ## even server down/up accidently. ldb_bucket_index_can_update=1 ## strategy map will save bucket index statistics into file, this is the file's directory ldb_bucket_index_file_dir=/root/tair_bin_ds2/data/bindex ## memory usage for memtable sharded by bucket when batch-put(especially for FastDump) ldb_max_mem_usage_for_memtable=3221225472 #### #### leveldb config (Warning: you should know what you're doing.) ## one leveldb instance max open files(actually table_cache_ capacity, consider as working set, see `ldb_table_cache_size) ldb_max_open_files=65535 ## whether return fail when occure fail when init/load db, and ## if true, read data when compactiong will verify checksum ldb_paranoid_check=0 ## memtable size ldb_write_buffer_size=67108864 ## sstable size ldb_target_file_size=8388608 ## max file size in each level. level-n (n > 0): (n - 1) * 10 * ldb_base_level_size ldb_base_level_size=134217728 ## sstable's block size # ldb_block_size=4096 ## sstable cache size (override `ldb_max_open_files) ldb_table_cache_size=1073741824 ##block cache size ldb_block_cache_size=16777216 ## arena used by memtable, arena block size #ldb_arenablock_size=4096 ## key is prefix-compressed period in block, ## this is period length(how many keys will be prefix-compressed period) # ldb_block_restart_interval=16 ## specifid compression method (snappy only now) # ldb_compression=1 ## compact when sstables count in level-0 is over this trigger ldb_l0_compaction_trigger=1 ## write will slow down when sstables count in level-0 is over this trigger ## or sstables' filesize in level-0 is over trigger * ldb_write_buffer_size if ldb_l0_limit_write_with_count=0 ldb_l0_slowdown_write_trigger=32 ## write will stop(wait until trigger down) ldb_l0_stop_write_trigger=64 ## when write memtable, max level to below maybe ldb_max_memcompact_level=3 ## read verify checksum ldb_read_verify_checksums=0 ## write sync log. (one write will sync log once, expensive) ldb_write_sync=0 ## bits per key when use bloom filter #ldb_bloomfilter_bits_per_key=10 ## filter data base logarithm. filterbasesize=1<<ldb_filter_base_logarithm #ldb_filter_base_logarithm=12
4）至此2台 Data Server 也配置完毕
四、启动Tair Server集群
1、通过终端任意选其中一台Server执行 set_shm.sh（需要root权限），修改系统分配内存策略，确保程序能够使用足够的共享内存
命令： “ ./set_shm.sh ”
2、分别通过终端进入2台Data Server目录，执行 tair.sh 脚本启动服务器，注意：请先启动DataServer，后启动ConfigServer，相关解释见wiki
此时由于Config Server还没有启动，Log会出现heartbeat错误。
[2014-12-19 19:28:42.336703] ERROR handlePacket (heartbeat_thread.cpp:141) [140335215126272] ControlPacket, cmd:3
[2014-12-19 19:28:43.341952] ERROR handlePacket (heartbeat_thread.cpp:141) [140335215126272] ControlPacket, cmd:2
[2014-12-19 19:28:43.341982] ERROR handlePacket (heartbeat_thread.cpp:141) [140335215126272] ControlPacket, cmd:3
[2014-12-19 19:28:44.345308] WARN update_server_table (tair_manager.cpp:1397) [140334767929088] updateServerTable, size: 2046
[2014-12-19 19:28:44.345312] WARN handlePacket (heartbeat_thread.cpp:212) [140335215126272] config server HOST UP: 10.0.2.15:5198
[2014-12-19 19:28:44.345350] WARN handlePacket (heartbeat_thread.cpp:212) [140335215126272] config server HOST UP: 10.0.2.15:5200
命令： “ ./tair.sh start_ds ”
3、分别通过终端进入2台Config Server目录，通过执行 tair.sh 脚本来启动服务器
命令： “ ./tair.sh start_cs ”
4、至此4台服务器启动完毕，过程不会一帆风顺，请耐心仔细，查阅log文件
五、客户端连接Tair Server
1、连接Tair服务器目前有3种方式：命令行、C++版本TairClient、Java版本TairClient（从依赖包可以看出使用的Mina通信框架），
底层使用socket通信，所以理论上只要支持socket操作的程序语言都可以直接实现Tair客户端
2、通过终端进入任意一个Server程序目录的 sbin 文件夹，执行 tairclient 命令连接Tair服务器，-c参数表示连接configserver，-s参数表示连接dataserver，
参照下图命令连接，“group_1” 是group.conf配置文件中的默认值。
连接到 tair configserver 后可以通过 put命令 新增一个键值对，例如：put key1 hellowold，然后通过get命令取值，如下图：
也可以连接到tair dataserver后可以查看单独某个ds上的数据，下图可以看出当连接到Port=5191的DataServer可以取到key1的值，5192的DS上则不能取到值。
Tair ConfigServer负载均衡采用一致性哈希算法进行数据分配，更多相关内容请查阅wiki。
六、更多
至此Tair服务器安装部署完毕，更多关于学习、整合、测试相关的内容请期待后续博文，同时也欢迎有兴趣的人交流沟通。