今天在一台新机子上编译项目，出现了这个错误，不知如何解决，先记录一下。
1>------ 已启动全部重新生成: 项目: ZERO_CHECK, 配置: Debug x64 ------
1> Checking Build System
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthAnnotation/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthFeatures/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthUtil/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthSymbology/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/earth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/kml/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/wcs/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/wms/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/tilecache/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/tileservice/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/yahoo/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/arcgis_map_cache/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/arcgis/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/tms/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/vpb/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/osg/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/agglite/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/model_simple/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/debug/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/cache_filesystem/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/ocean_surface/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/refresh/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/xyz/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/gdal/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/feature_ogr/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/feature_wfs/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/feature_tfs/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/model_feature_stencil/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/model_feature_geom/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/mask_feature/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/label_overlay/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/label_annotation/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/mbtiles/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/engine_osgterrain/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/engine_quadtree/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/engine_mp/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/engine_byo/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/vdatum_egm84/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/vdatum_egm96/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarthDrivers/vdatum_egm2008/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_viewer/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_seed/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_package/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_tfs/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_boundarygen/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_backfill/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_overlayviewer/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_version/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_clamp/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_manip/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_toc/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_elevation/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_features/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_featureinfo/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_featurefilter/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_los/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_terrainprofile/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_map/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_annotation/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_tracks/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_featureeditor/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_measure/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_controls/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_shadercomp/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_tilesource/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_imageoverlay/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_city/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_graticule/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_featuremanip/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_featurequery/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_occlusionculling/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_colorfilter/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_contour/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_verticalscale/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_sequencecontrol/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_minimap/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/applications/osgearth_shadow/CMakeFiles/generate.stamp is up-to-date.
2>------ 已启动全部重新生成: 项目: osgEarth, 配置: Debug x64 ------
2> Building Custom Rule O:/OpenSceneGraph/osgearth-osgearth-2.4/src/osgEarth/CMakeLists.txt
2> CMake does not need to re-run because O:/OpenSceneGraph/osgearth_2_4_build/src/osgEarth/CMakeFiles/generate.stamp is up-to-date.
2> tinystr.cpp
2> tinyxml.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth inyxml.cpp(1567): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> o:openscenegraphosgearth-osgearth-2.4srcosgearth inyxml.h(455): note: 或 “std::string &operator <<(std::string &,const TiXmlNode &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth inyxml.cpp(1562): note: 或 “std::ostream &operator <<(std::ostream &,const TiXmlNode &)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::string>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::string
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth inyxml.cpp(1567): note: 尝试匹配参数列表“(std::ostream, const std::string)”时
2> tinyxmlerror.cpp
2> tinyxmlparser.cpp
2> Bounds.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): error C2679: 二进制“<<”: 没有找到接受“std::basic_string<char,std::char_traits<char>,std::allocator<char>>”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): note: 尝试匹配参数列表“(std::stringstream, std::basic_string<char,std::char_traits<char>,std::allocator<char>>)”时
2> Cache.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): error C2679: 二进制“<<”: 没有找到接受“std::basic_string<char,std::char_traits<char>,std::allocator<char>>”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): note: 尝试匹配参数列表“(std::stringstream, std::basic_string<char,std::char_traits<char>,std::allocator<char>>)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCache.cpp(72): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCache.cpp(72): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCache.cpp(96): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCache.cpp(96): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2> CachePolicy.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): error C2679: 二进制“<<”: 没有找到接受“std::basic_string<char,std::char_traits<char>,std::allocator<char>>”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): note: 尝试匹配参数列表“(std::stringstream, std::basic_string<char,std::char_traits<char>,std::allocator<char>>)”时
2> CacheSeed.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): error C2679: 二进制“<<”: 没有找到接受“std::basic_string<char,std::char_traits<char>,std::allocator<char>>”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): note: 尝试匹配参数列表“(std::stringstream, std::basic_string<char,std::char_traits<char>,std::allocator<char>>)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(71): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(71): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(75): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(75): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(79): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(79): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(83): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(83): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(104): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(104): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(108): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(108): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(112): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(112): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(116): error C2679: 二进制“<<”: 没有找到接受“const std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCacheSeed.cpp(116): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, const std::string)”时
2> Capabilities.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(141): error C2679: 二进制“<<”: 没有找到接受“std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::string>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::string
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(141): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(144): error C2679: 二进制“<<”: 没有找到接受“std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::string>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::string
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(144): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(147): error C2679: 二进制“<<”: 没有找到接受“std::string”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::string>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::string
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(147): note: 尝试匹配参数列表“(std::basic_ostream<char,std::char_traits<char>>, std::string)”时
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(197): error C2064: 项不会计算为接受 0 个参数的函数
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarthCapabilities.cpp(202): error C2039: “getLanguageVersion”: 不是“osg::GLExtensions”的成员
2> O:OpenSceneGraphOpenSceneGraph_3_6_installincludeosg/GLExtensions(159): note: 参见“osg::GLExtensions”的声明
2> ClampableNode.cpp
2>O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): error C2679: 二进制“<<”: 没有找到接受“std::basic_string<char,std::char_traits<char>,std::allocator<char>>”类型的右操作数的运算符(或没有可接受的转换)
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(495): note: 可能是“std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_streambuf<char,std::char_traits<char>> *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(475): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(const void *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(455): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(435): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(double)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(415): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(float)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(395): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned __int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(375): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(__int64)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(355): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(335): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(long)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(315): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(290): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(int)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(270): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(unsigned short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(236): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(short)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(216): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(bool)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(209): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::ios_base &(__cdecl *)(std::ios_base &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(202): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ios<char,std::char_traits<char>> &(__cdecl *)(std::basic_ios<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(196): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::basic_ostream<char,std::char_traits<char>>::operator <<(std::basic_ostream<char,std::char_traits<char>> &(__cdecl *)(std::basic_ostream<char,std::char_traits<char>> &))”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(692): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(739): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(777): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(824): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(950): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const signed char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(957): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,signed char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(964): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const unsigned char *)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(971): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,unsigned char)”
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(981): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(std::basic_ostream<char,std::char_traits<char>> &&,const _Ty &)”
2> with
2> [
2> _Ty=std::basic_string<char,std::char_traits<char>,std::allocator<char>>
2> ]
2> C:Program Files (x86)Microsoft Visual Studio 14.0VCincludeostream(1019): note: 或 “std::basic_ostream<char,std::char_traits<char>> &std::operator <<<char,std::char_traits<char>>(std::basic_ostream<char,std::char_traits<char>> &,const std::error_code &)”
2> O:OpenSceneGraphosgearth-osgearth-2.4srcosgEarth/StringUtils(205): note: 尝试匹配参数列表“(std::stringstream, std::basic_string<char,std::char_traits<char>,std::allocator<char>>)”时
2>已取消一个任务。
2>已取消一个任务。
已取消生成。