下载地址：https://oss.oetiker.ch/smokeping/doc/smokeping_install.en.html
1.安装epel package
yum install epel-release -y
2. 安装development tools
yum groupinstall "Development tools" -y
3. 安装fping (smokeping 2.7.2以上需要fping4.0以上，因此需要手动编译)
cd ~
wget https://fping.org/dist/fping-4.2.tar.gz -O /usr/local/src/fping-4.2.tar.gz
cd /usr/local/src/
tar -zxvf fping-4.2.tar.gz
cd fping-4.2
./configure
make
make install
安装好的fping位于/usr/local/sbin/fping
4. 安装echoping (预防以后需要做tcp ping)
cd ~
wget https://fossies.org/linux/misc/old/echoping-6.0.2.tar.gz -O /usr/local/src/echoping-6.0.2.tar.gz
cd /usr/local/src/
tar -zxvf echoping-6.0.2.tar.gz
cd echoping-6.0.2
yum install -y popt-devel openssl openssl-devel
./configure --with-ssl --without-libidn
make
make install
安装好的echoping位于/usr/local/bin/echoping
5 安装需要的package
cd ~
yum install rrdtool rrdtool-perl curl bind-utils gcc make vim gcc-c++ -y
yum install perl-core -y
5.5 开启SSL支持
yum install perl-LWP-Protocol-https
6. 安装apache, 注意smokeping是fcgi程序，因此apache 需要安装mod_fcgid, http的版本是2.4.6,
yum install httpd httpd-devel
yum install mod_fcgid
systemctl enable httpd
7 安装smokeping
cd ~
wget https://oss.oetiker.ch/smokeping/pub/smokeping-2.7.3.tar.gz -O /usr/local/src/smokeping-2.7.3.tar.gz
cd /usr/local/src/
tar -zxvf smokeping-2.7.3.tar.gz
cd smokeping-2.7.3
./configure --prefix=/opt/smokeping PERL5LIB=/usr/lib64/perl5/
/usr/bin/gmake install
注意，如果我们不加上 ./configure –prefix=/opt/smokeping PERL5LIB=/usr/lib64/perl5/，会提示下面的：
** Ready to install Smokeping ******************************
Settings:
PERL5LIB = not set
PERL = /usr/bin/perl
The Smokeping Makefiles use GNU make functionality.
Continue installation with
/usr/bin/gmake install
如果我们加上PERL5LIB=/usr/lib64/perl5的话，会显示如下:
** Ready to install Smokeping ******************************
Settings:
PERL5LIB = /usr/lib64/perl5/
PERL = /usr/bin/perl
The Smokeping Makefiles use GNU make functionality.
Continue installation with
/usr/bin/gmake install
9 初始化smokeping, 我们需要建立三个文件夹，data用来存放rrd文件，var用来存放smokeping的pid， log用来存放smokeping.log
cd /opt/smokeping
mkdir data var cache
chmod 777 data var cache
chown apache:apache data var cache -R
touch var/log/smokeping.log
chown apache:apache var/log/smokeping.log
10 重命名配置文件等
cd /opt/smokeping/htdocs/
cp smokeping.fcgi.dist smokeping.fcgi
cd /opt/smokeping/etc
cp config.dist config
cp basepage.html.dist basepage.html
配置config文件
11.编辑/opt/smokeping/etc/config
*** General *** owner = JCJGK contact = some@address.nowhere mailhost = my.mail.host sendmail = /usr/sbin/sendmail # NOTE: do not put the Image Cache below cgi-bin # since all files under cgi-bin will be executed ... this is not # good for images. imgcache = /opt/smokeping/cache #修改处 imgurl = cache #修改处 datadir = /opt/smokeping/data #修改处 piddir = /opt/smokeping/var #修改处， cgiurl = http://10.50.133.23/smokeping.cgi #修改处，访问地址 smokemail = /opt/smokeping/etc/smokemail.dist tmail = /opt/smokeping/etc/tmail.dist # specify this to get syslog logging syslogfacility = local0 # each probe is now run in its own process # disable this to revert to the old behaviour # concurrentprobes = no *** Alerts *** to = |/opt/smokeping/bin/mailx_alert.sh from = smokealert@company.xy +someloss type = loss # in percent pattern = >0%,*12*,>0%,*12*,>0% comment = loss 3 times in a row +hostdown type = loss pattern = ==0%,==0%,==0%,==U comment = No response *** Database *** step = 60 pings = 60 # consfn mrhb steps total AVERAGE 0.5 1 1008 AVERAGE 0.5 12 4320 MIN 0.5 12 4320 MAX 0.5 12 4320 AVERAGE 0.5 144 720 MAX 0.5 144 720 MIN 0.5 144 720 *** Presentation *** template = /opt/smokeping/etc/basepage.html htmltitle = yes graphborders = no charset = utf-8 + charts menu = Charts title = The most interesting destinations ++ stddev sorter = StdDev(entries=>4) title = Top Standard Deviation menu = Std Deviation format = Standard Deviation %f ++ max sorter = Max(entries=>5) title = Top Max Roundtrip Time menu = by Max format = Max Roundtrip Time %f seconds ++ loss sorter = Loss(entries=>5) title = Top Packet Loss menu = Loss format = Packets Lost %f ++ median sorter = Median(entries=>5) title = Top Median Roundtrip Time menu = by Median format = Median RTT %f seconds + overview width = 600 height = 600 range = 10h + detail width = 600 height = 600 unison_tolerance = 2 "Last 3 Hours" 3h "Last 30 Hours" 30h "Last 10 Days" 10d "Last 400 Days" 400d #+ hierarchies #++ owner #title = Host Owner #++ location #title = Location *** Probes *** + FPing binary = /usr/local/sbin/fping *** Slaves *** secrets=/opt/smokeping/etc/smokeping_secrets.dist +boomer display_name=boomer color=0000ff +slave2 display_name=another color=00ff00 *** Targets *** probe = FPing menu = Top title = Network Latency Grapher remark = Welcome to the SmokePing website of CCBY Company. Here you will learn all about the latency of our network. #+ Test #menu= Targets #parents = owner:/Test/James location:/ #++ James #menu = James #title =James #alerts = someloss #slaves = boomer slave2 #host = james.address +Monitor menu = Monitor title = Host_Monitor ++BD menu = Baoding title = BD-Test-DataCenter host = /Monitor/BD/BD-node-1 /Monitor/BD/BD-node-2 /Monitor/BD/BD-node-3 /Monitor/BD/BD-node-4 /Monitor/BD/BD-node-5 +++BD-node-1 menu = BD-X3650 title = BD-X3650 alerts = someloss host = 10.50.132.100 +++BD-node-2 menu = BD-X3850 title = BD-X3850 alerts = someloss host = 10.50.132.141 +++BD-node-3 menu = BD-DL380 title = BD-DL380 alerts = someloss host = 10.50.132.4 +++BD-node-4 menu = BD-KF-DL380 title = BD-KF-DL380 alerts = someloss host = 10.50.132.2 +++BD-node-5 menu = BD-Z640 title = BD-Z640 alerts = someloss #host = 10.50.130.220 host = 10.50.132.5 ++ MSD menu = MSD title = MSD-Test-DataCenter alerts = someloss host = 10.50.100.13 ++ TH menu = TianHe title = TianHe-Cluster alerts = someloss host = 10.50.133.211
12.启动smokeping
手动：[root@localhost smokeping]# bin/smokeping --logfile=/var/log/smokeping.log
自动：
[root@localhost smokeping]# vim /etc/systemd/system/smokeping.service [Unit] Description=Smokeping Network performance monitoring After=syslog.target network.target [Service] ExecStart=/opt/smokeping/bin/smokeping --logfile=/var/log/smokeping.log ExecReload=/bin/kill -HUP $MAINPID StandardError=syslog Type=forking PIDFile=/opt/smokeping/var/smokeping.pid [Install] WantedBy=multi-user.target # 设置完之后重启daemon [root@localhost smokeping]# systemctl daemon-reload [root@localhost smokeping]# systemctl start smokeping
12.修改apache配置文件,在最下面一行 写入
[root@localhost smokeping]# vim /etc/httpd/conf/httpd.conf Alias /cache "/opt/smokeping/cache" Alias /css "/opt/smokeping/htdocs/css/" Alias /js "/opt/smokeping/htdocs/js/" Alias /smokeping "/opt/smokeping/htdocs/smokeping.fcgi" # # Relax access to content within /var/www. # <Directory "/opt/smokeping"> AllowOverride None Options All AddHandler cgi-script .fcgi .cgi Order allow,deny Allow from all # 密码认证 AuthName "admin" AuthType Basic AuthUserFile /opt/smokeping/htdocs/htpasswd Require valid-user DirectoryIndex smokeping.fcgi </Directory>
13.启动httpd服务
systemctl start httpd
14.关闭防火墙和selinux