一、去geoserve的lib目录下 geoserverlib找jetty-servlets-XX.jar , jetty-util-xx.jar(xx表示不同的版本)两个jar包；
二、把两个jar包拷贝到geoserverwebappsgeoserverWEB-INFlib目录下；
三、去geoserverwebappsgeoserverWEB-INF目录下找web.xml,进行如下修改：
<!-- Uncomment following filter to enable CORS in Jetty. Do not forget the second config block further down.
<filter>
<filter-name>cross-origin</filter-name>
<filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
<init-param>
<param-name>chainPreflight</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>allowedOrigins</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>allowedMethods</param-name>
<param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
</init-param>
<init-param>
<param-name>allowedHeaders</param-name>
<param-value>*</param-value>
</init-param>
</filter>
--><filter>
<filter-name>cross-origin</filter-name>
<filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
<init-param>
<param-name>allowedOrigins</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>allowedMethods</param-name>
<param-value>GET,POST</param-value>
</init-param>
<init-param>
<param-name>allowedHeaders</param-name>
<param-value>x-requested-with,content-type</param-value>
</init-param>
</filter>- 去找<filter-mapping>的平级标签，加上以下内容：
<filter-mapping>
<filter-name>cross-origin</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
四、完整版web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>GeoServer</display-name>
<context-param>
<param-name>serviceStrategy</param-name>
<!-- Meaning of the different values :
PARTIAL-BUFFER2
- Partially buffers the first xKb to disk. Once that has buffered, the the
result is streamed to the user. This will allow for most errors to be caught
early.
BUFFER
- stores the entire response in memory first, before sending it off to
the user (may run out of memory)
SPEED
- outputs directly to the response (and cannot recover in the case of an
error)
FILE
- outputs to the local filesystem first, before sending it off to the user
-->
<param-value>PARTIAL-BUFFER2</param-value>
</context-param>
<context-param>
<!-- see comments on the PARTIAL-BUFFER strategy -->
<!-- this sets the size of the buffer. default is "50" = 50kb -->
<param-name>PARTIAL_BUFFER_STRATEGY_SIZE</param-name>
<param-value>50</param-value>
</context-param>
<!--Can be true or false (defaults to: false). -->
<!--When true the JSONP (text/javascript) output format is enabled -->
<!--
<context-param>
<param-name>ENABLE_JSONP</param-name>
<param-value>true</param-value>
</context-param>
-->
<!--
<context-param>
<param-name>PROXY_BASE_URL</param-name>
<param-value>http://82.58.146.45/geoserver</param-value>
</context-param>
-->
<!--
<context-param>
<param-name>GEOSERVER_DATA_DIR</param-name>
<param-value>C:eclipseworkspacegeoserver_trunkciteconfCiteWFSPostGIS</param-value>
</context-param>
-->
<!-- pick up all spring application contexts -->
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>classpath*:/applicationContext.xml classpath*:/applicationSecurityContext.xml</param-value>
</context-param>
<filter>
<filter-name>FlushSafeFilter</filter-name>
<filter-class>org.geoserver.filters.FlushSafeFilter</filter-class>
</filter>
<filter>
<filter-name>Set Character Encoding</filter-name>
<filter-class>org.springframework.web.filter.CharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
</filter>
<filter>
<filter-name>SessionDebugger</filter-name>
<filter-class>org.geoserver.filters.SessionDebugFilter</filter-class>
</filter>
<filter>
<filter-name>filterChainProxy</filter-name>
<filter-class> org.springframework.web.filter.DelegatingFilterProxy</filter-class>
</filter>
<filter>
<filter-name>xFrameOptionsFilter</filter-name>
<filter-class>org.geoserver.filters.XFrameOptionsFilter</filter-class>
</filter>
<filter>
<filter-name>GZIP Compression Filter</filter-name>
<filter-class>org.geoserver.filters.GZIPFilter</filter-class>
<init-param>
<!-- The compressed-types parameter is a comma-separated list of regular expressions.
If a mime type matches any of the regular expressions then it will be compressed.
-->
<param-name>compressed-types</param-name>
<param-value>text/.*,.*xml.*,application/json,application/x-javascript</param-value>
</init-param>
</filter>
<filter>
<filter-name>Request Logging Filter</filter-name>
<filter-class>org.geoserver.filters.LoggingFilter</filter-class>
<init-param>
<!-- The 'enabled' parameter is a boolean value, "true" (case-insensitive) for true or
any other value for false. If enabled, then the logging will be performed;
otherwise the logging filter will have no effect. If not specified, this
parameter defaults to false.
-->
<param-name>enabled</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<!-- The 'log-request-headers' parameter is a boolean value, "true" (case-insensitive) for
true or any other value for false. If enabled, then the logging will include the HTTP
headers of requests. If not specified, this parameter defaults to false.
-->
<param-name>log-request-headers</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<!-- The 'log-request-bodies' parameter is a boolean value, "true" (case-insensitive) for
true or any other value for false. If enabled, then the logging will include the body
of POST and PUT requests. If not specified, this parameter defaults to false.
Note that this may noticeably degrade responsiveness of your geoserver since it will
not begin to process requests until the entire request body has been received by the
server.
-->
<param-name>log-request-bodies</param-name>
<param-value>false</param-value>
</init-param>
</filter>
<filter>
<filter-name>Advanced Dispatch Filter</filter-name>
<filter-class>org.geoserver.platform.AdvancedDispatchFilter</filter-class>
<!--
This filter allows for a single mapping to the spring dispatcher. However using /* as a mapping
in a servlet mapping causes the servlet path to be "/" of the request. This causes problems with
library like wicket and restlet. So this filter fakes the servlet path by assuming the first
component of the path is the mapped path.
-->
</filter>
<filter>
<filter-name>Spring Delegating Filter</filter-name>
<filter-class>org.geoserver.filters.SpringDelegatingFilter</filter-class>
<!--
This filter allows for filters to be loaded via spring rather than
registered here in web.xml. One thing to note is that for such filters
init() is not called. INstead any initialization is performed via spring
ioc.
-->
</filter>
<filter>
<filter-name>Thread locals cleanup filter</filter-name>
<filter-class>org.geoserver.filters.ThreadLocalsCleanupFilter</filter-class>
<!--
This filter cleans up thread locals Geotools is setting up for concurrency and performance
reasons
-->
</filter>
<!-- Uncomment following filter to enable CORS in Jetty. Do not forget the second config block further down.-->
<filter>
<filter-name>cross-origin</filter-name>
<filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
<init-param>
<param-name>chainPreflight</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>allowedOrigins</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>allowedMethods</param-name>
<param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
</init-param>
<init-param>
<param-name>allowedHeaders</param-name>
<param-value>*</param-value>
</init-param>
</filter>
<filter>
<filter-name>cross-origin</filter-name>
<filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
<init-param>
<param-name>allowedOrigins</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>allowedMethods</param-name>
<param-value>GET,POST</param-value>
</init-param>
<init-param>
<param-name>allowedHeaders</param-name>
<param-value>x-requested-with,content-type</param-value>
</init-param>
</filter>
<!-- Uncomment following filter to enable CORS in Tomcat. Do not forget the second config block further down.
<filter>
<filter-name>cross-origin</filter-name>
<filter-class>org.apache.catalina.filters.CorsFilter</filter-class>
<init-param>
<param-name>cors.allowed.origins</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>cors.allowed.methods</param-name>
<param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
</init-param>
<init-param>
<param-name>cors.allowed.headers</param-name>
<param-value>*</param-value>
</init-param>
</filter>
-->
<!--
THIS FILTER MAPPING MUST BE THE FIRST ONE, otherwise we end up with ruined chars in the input from the GUI
See the "Note" in the Tomcat character encoding guide:
http://wiki.apache.org/tomcat/FAQ/CharacterEncoding
-->
<filter-mapping>
<filter-name>Set Character Encoding</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>cross-origin</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>FlushSafeFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>SessionDebugger</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>GZIP Compression Filter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>xFrameOptionsFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>Request Logging Filter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<!--
If you want to use your security system comment out this one too
-->
<filter-mapping>
<filter-name>filterChainProxy</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>Advanced Dispatch Filter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>Spring Delegating Filter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>Thread locals cleanup filter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<!-- general initializer, should be first thing to execute -->
<listener>
<listener-class>org.geoserver.GeoserverInitStartupListener</listener-class>
</listener>
<!-- logging initializer, should execute before spring context startup -->
<listener>
<listener-class>org.geoserver.logging.LoggingStartupContextListener</listener-class>
</listener>
<!-- spring context loader -->
<listener>
<listener-class>org.geoserver.platform.GeoServerContextLoaderListener</listener-class>
</listener>
<!-- http session listener proxy -->
<listener>
<listener-class>org.geoserver.platform.GeoServerHttpSessionListenerProxy</listener-class>
</listener>
<!-- request context listener for session-scoped beans -->
<listener>
<listener-class>org.springframework.web.context.request.RequestContextListener</listener-class>
</listener>
<!-- spring dispatcher servlet, dispatches all incoming requests -->
<servlet>
<servlet-name>dispatcher</servlet-name>
<servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
</servlet>
<!-- single mapping to spring, this only works properly if the advanced dispatch filter is
active -->
<servlet-mapping>
<servlet-name>dispatcher</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
<mime-mapping>
<extension>xsl</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>sld</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>json</extension>
<mime-type>application/json</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
</web-app>