• FFMpeg写MP4文件例子分析


    http://blog.csdn.net/eightdegree/article/details/7425811

     这段时间看了FFMpeg提供的例子muxing.c,我略微修改了下源代码,使其生成一个MP4文件,音频使用AAC编码,视频使用H.264编码。代码很简单,我就不做说明了,代码如下。

        以后我们继续写如何将DirectShow中采集的音视频数据编码并生成MP4文件。

    /* 5 seconds stream duration */
    #define STREAM_DURATION   5.0
    #define STREAM_FRAME_RATE 25 /* 25 images/s */
    #define STREAM_NB_FRAMES  ((int)(STREAM_DURATION * STREAM_FRAME_RATE))
    #define STREAM_PIX_FMT PIX_FMT_YUV420P /* default pix_fmt */
    
    static int sws_flags = SWS_BICUBIC;
    
    /**************************************************************/
    /* audio output */
    
    static float t, tincr, tincr2;
    static int16_t *samples;
    static uint8_t *audio_outbuf;
    static int audio_outbuf_size;
    static int audio_input_frame_size;
    
    /*
    * add an audio output stream
    */
    static AVStream *add_audio_stream(AVFormatContext *oc, enum CodecID codec_id)
    {
    	AVCodecContext *c;
    	AVStream *st;
    
    	st = avformat_new_stream(oc, NULL);
    	if (!st) {
    		fprintf(stderr, "Could not alloc stream
    ");
    		exit(1);
    	}
    	st->id = 1;
    
    	c = st->codec;
    	c->codec_id = codec_id;
    	c->codec_type = AVMEDIA_TYPE_AUDIO;
    
    	/* put sample parameters */
    	c->sample_fmt = AV_SAMPLE_FMT_S16;
    	c->bit_rate = 64000;
    	c->sample_rate = 44100;
    	c->channels = 2;
    
    	// some formats want stream headers to be separate
    	if (oc->oformat->flags & AVFMT_GLOBALHEADER)
    		c->flags |= CODEC_FLAG_GLOBAL_HEADER;
    
    	return st;
    }
    
    static void open_audio(AVFormatContext *oc, AVStream *st)
    {
    	AVCodecContext *c;
    	AVCodec *codec;
    
    	c = st->codec;
    
    	/* find the audio encoder */
    	codec = avcodec_find_encoder(c->codec_id);
    	if (!codec) {
    		fprintf(stderr, "codec not found
    ");
    		exit(1);
    	}
    
    	/* open it */
    	if (avcodec_open(c, codec) < 0) {
    		fprintf(stderr, "could not open codec
    ");
    		exit(1);
    	}
    
    	/* init signal generator */
    	t = 0;
    	tincr = 2 * M_PI * 110.0 / c->sample_rate;
    	/* increment frequency by 110 Hz per second */
    	tincr2 = 2 * M_PI * 110.0 / c->sample_rate / c->sample_rate;
    
    	audio_outbuf_size = 10000;
    	audio_outbuf = (uint8_t *)av_malloc(audio_outbuf_size);
    
    	/* ugly hack for PCM codecs (will be removed ASAP with new PCM
    	support to compute the input frame size in samples */
    	if (c->frame_size <= 1) {
    		audio_input_frame_size = audio_outbuf_size / c->channels;
    		switch(st->codec->codec_id) {
    		case CODEC_ID_PCM_S16LE:
    		case CODEC_ID_PCM_S16BE:
    		case CODEC_ID_PCM_U16LE:
    		case CODEC_ID_PCM_U16BE:
    			audio_input_frame_size >>= 1;
    			break;
    		default:
    			break;
    		}
    	} else {
    		audio_input_frame_size = c->frame_size;
    	}
    	samples = (int16_t *)av_malloc(audio_input_frame_size * 2 * c->channels);
    }
    
    /* prepare a 16 bit dummy audio frame of 'frame_size' samples and
    'nb_channels' channels */
    static void get_audio_frame(int16_t *samples, int frame_size, int nb_channels)
    {
    	int j, i, v;
    	int16_t *q;
    
    	q = samples;
    	for (j = 0; j < frame_size; j++) {
    		v = (int)(sin(t) * 10000);
    		for(i = 0; i < nb_channels; i++)
    			*q++ = v;
    		t += tincr;
    		tincr += tincr2;
    	}
    }
    
    static void write_audio_frame(AVFormatContext *oc, AVStream *st)
    {
    	AVCodecContext *c;
    	AVPacket pkt;
    	av_init_packet(&pkt);
    
    	c = st->codec;
    
    	get_audio_frame(samples, audio_input_frame_size, c->channels);
    
    	pkt.size = avcodec_encode_audio(c, audio_outbuf, audio_outbuf_size, samples);
    
    	if (c->coded_frame && c->coded_frame->pts != AV_NOPTS_VALUE)
    		pkt.pts= av_rescale_q(c->coded_frame->pts, c->time_base, st->time_base);
    	pkt.flags |= AV_PKT_FLAG_KEY;
    	pkt.stream_index = st->index;
    	pkt.data = audio_outbuf;
    
    	/* write the compressed frame in the media file */
    	if (av_interleaved_write_frame(oc, &pkt) != 0) {
    		fprintf(stderr, "Error while writing audio frame
    ");
    		exit(1);
    	}
    }
    
    static void close_audio(AVFormatContext *oc, AVStream *st)
    {
    	avcodec_close(st->codec);
    
    	av_free(samples);
    	av_free(audio_outbuf);
    }
    
    /**************************************************************/
    /* video output */
    
    static AVFrame *picture, *tmp_picture;
    static uint8_t *video_outbuf;
    static int frame_count, video_outbuf_size;
    
    /* add a video output stream */
    static AVStream *add_video_stream(AVFormatContext *oc, enum CodecID codec_id)
    {
    	AVCodecContext *c;
    	AVStream *st;
    	AVCodec *codec;
    
    	st = avformat_new_stream(oc, NULL);
    	if (!st) {
    		fprintf(stderr, "Could not alloc stream
    ");
    		exit(1);
    	}
    
    	c = st->codec;
    
    	/* find the video encoder */
    	codec = avcodec_find_encoder(codec_id);
    	if (!codec) {
    		fprintf(stderr, "codec not found
    ");
    		exit(1);
    	}
    	avcodec_get_context_defaults3(c, codec);
    
    	c->codec_id = codec_id;
    
    	/* put sample parameters */
    	c->bit_rate = /*400000*/3000000;
    	/* resolution must be a multiple of two */
    	c->width = /*352*/640;
    	c->height = /*288*/480;
    	/* time base: this is the fundamental unit of time (in seconds) in terms
    	of which frame timestamps are represented. for fixed-fps content,
    	timebase should be 1/framerate and timestamp increments should be
    	identically 1. */
    	c->time_base.den = STREAM_FRAME_RATE;
    	c->time_base.num = 1;
    	c->gop_size = 12; /* emit one intra frame every twelve frames at most */
    	c->pix_fmt = STREAM_PIX_FMT;
    	if (c->codec_id == CODEC_ID_MPEG2VIDEO) {
    		/* just for testing, we also add B frames */
    		c->max_b_frames = 2;
    	}
    	if (c->codec_id == CODEC_ID_MPEG1VIDEO){
    		/* Needed to avoid using macroblocks in which some coeffs overflow.
    		This does not happen with normal video, it just happens here as
    		the motion of the chroma plane does not match the luma plane. */
    		c->mb_decision=2;
    	}
    	// some formats want stream headers to be separate
    	if (oc->oformat->flags & AVFMT_GLOBALHEADER)
    		c->flags |= CODEC_FLAG_GLOBAL_HEADER;
    
    	
    
    	return st;
    }
    
    static AVFrame *alloc_picture(enum PixelFormat pix_fmt, int width, int height)
    {
    	AVFrame *picture;
    	uint8_t *picture_buf;
    	int size;
    
    	picture = avcodec_alloc_frame();
    	if (!picture)
    		return NULL;
    	size = avpicture_get_size(pix_fmt, width, height);
    	picture_buf = (uint8_t *)av_malloc(size);
    	if (!picture_buf) {
    		av_free(picture);
    		return NULL;
    	}
    	avpicture_fill((AVPicture *)picture, picture_buf,
    		pix_fmt, width, height);
    	return picture;
    }
    
    static void open_video(AVFormatContext *oc, AVStream *st)
    {
    	AVCodec *codec;
    	AVCodecContext *c;
    
    	c = st->codec;
    
    	/* find the video encoder */
    	codec = avcodec_find_encoder(c->codec_id);
    	if (!codec) {
    		fprintf(stderr, "codec not found
    ");
    		exit(1);
    	}
    
    	/* open the codec */
    	if (avcodec_open(c, codec) < 0) {
    		fprintf(stderr, "could not open codec
    ");
    		exit(1);
    	}
    
    	video_outbuf = NULL;
    	if (!(oc->oformat->flags & AVFMT_RAWPICTURE)) {
    		/* allocate output buffer */
    		/* XXX: API change will be done */
    		/* buffers passed into lav* can be allocated any way you prefer,
    		as long as they're aligned enough for the architecture, and
    		they're freed appropriately (such as using av_free for buffers
    		allocated with av_malloc) */
    		video_outbuf_size = 200000;
    		video_outbuf = (uint8_t *)av_malloc(video_outbuf_size);
    	}
    
    	/* allocate the encoded raw picture */
    	picture = alloc_picture(c->pix_fmt, c->width, c->height);
    	if (!picture) {
    		fprintf(stderr, "Could not allocate picture
    ");
    		exit(1);
    	}
    
    	/* if the output format is not YUV420P, then a temporary YUV420P
    	picture is needed too. It is then converted to the required
    	output format */
    	tmp_picture = NULL;
    	if (c->pix_fmt != PIX_FMT_YUV420P) {
    		tmp_picture = alloc_picture(PIX_FMT_YUV420P, c->width, c->height);
    		if (!tmp_picture) {
    			fprintf(stderr, "Could not allocate temporary picture
    ");
    			exit(1);
    		}
    	}
    }
    
    /* prepare a dummy image */
    static void fill_yuv_image(AVFrame *pict, int frame_index, int width, int height)
    {
    	int x, y, i;
    
    	i = frame_index;
    
    	/* Y */
    	for (y = 0; y < height; y++) {
    		for (x = 0; x < width; x++) {
    			pict->data[0][y * pict->linesize[0] + x] = x + y + i * 3;
    		}
    	}
    
    	/* Cb and Cr */
    	for (y = 0; y < height/2; y++) {
    		for (x = 0; x < width/2; x++) {
    			pict->data[1][y * pict->linesize[1] + x] = 128 + y + i * 2;
    			pict->data[2][y * pict->linesize[2] + x] = 64 + x + i * 5;
    		}
    	}
    }
    
    static void write_video_frame(AVFormatContext *oc, AVStream *st)
    {
    	int out_size, ret;
    	AVCodecContext *c;
    	static struct SwsContext *img_convert_ctx;
    
    	c = st->codec;
    
    	if (frame_count >= STREAM_NB_FRAMES) {
    		/* no more frame to compress. The codec has a latency of a few
    		frames if using B frames, so we get the last frames by
    		passing the same picture again */
    	} else {
    		if (c->pix_fmt != PIX_FMT_YUV420P) {
    			/* as we only generate a YUV420P picture, we must convert it
    			to the codec pixel format if needed */
    			if (img_convert_ctx == NULL) {
    				img_convert_ctx = sws_getContext(c->width, c->height,
    					PIX_FMT_YUV420P,
    					c->width, c->height,
    					c->pix_fmt,
    					sws_flags, NULL, NULL, NULL);
    				if (img_convert_ctx == NULL) {
    					fprintf(stderr, "Cannot initialize the conversion context
    ");
    					exit(1);
    				}
    			}
    			fill_yuv_image(tmp_picture, frame_count, c->width, c->height);
    			sws_scale(img_convert_ctx, tmp_picture->data, tmp_picture->linesize,
    				0, c->height, picture->data, picture->linesize);
    		} else {
    			fill_yuv_image(picture, frame_count, c->width, c->height);
    		}
    	}
    
    
    	if (oc->oformat->flags & AVFMT_RAWPICTURE) {
    		/* raw video case. The API will change slightly in the near
    		future for that. */
    		AVPacket pkt;
    		av_init_packet(&pkt);
    
    		pkt.flags |= AV_PKT_FLAG_KEY;
    		pkt.stream_index = st->index;
    		pkt.data = (uint8_t *)picture;
    		pkt.size = sizeof(AVPicture);
    
    		ret = av_interleaved_write_frame(oc, &pkt);
    	} else {
    		/* encode the image */
    		out_size = avcodec_encode_video(c, video_outbuf, video_outbuf_size, picture);
    		/* if zero size, it means the image was buffered */
    		if (out_size > 0) {
    			AVPacket pkt;
    			av_init_packet(&pkt);
    
    			if (c->coded_frame->pts != AV_NOPTS_VALUE)
    				pkt.pts= av_rescale_q(c->coded_frame->pts, c->time_base, st->time_base);
    			if(c->coded_frame->key_frame)
    				pkt.flags |= AV_PKT_FLAG_KEY;
    			pkt.stream_index = st->index;
    			pkt.data = video_outbuf;
    			pkt.size = out_size;
    
    //			printf("pts %d 
    ", c->coded_frame->pts);
    
    			/* write the compressed frame in the media file */
    			ret = av_interleaved_write_frame(oc, &pkt);
    		} else {
    			ret = 0;
    		}
    	}
    	if (ret != 0) {
    		fprintf(stderr, "Error while writing video frame
    ");
    		exit(1);
    	}
    	frame_count++;
    }
    
    static void close_video(AVFormatContext *oc, AVStream *st)
    {
    	avcodec_close(st->codec);
    	av_free(picture->data[0]);
    	av_free(picture);
    	if (tmp_picture) {
    		av_free(tmp_picture->data[0]);
    		av_free(tmp_picture);
    	}
    	av_free(video_outbuf);
    }
    
    /**************************************************************/
    /* media file output */
    
    
    int main(int argc, char **argv)
    {
    	const char *filename;
    	AVOutputFormat *fmt;
    	AVFormatContext *oc;
    	AVStream *audio_st, *video_st;
    	double audio_pts, video_pts;
    	int i;
    
    	/* initialize libavcodec, and register all codecs and formats */
    	av_register_all();
    
    #if 0
    	if (argc != 2) {
    		printf("usage: %s output_file
    "
    			"API example program to output a media file with libavformat.
    "
    			"The output format is automatically guessed according to the file extension.
    "
    			"Raw images can also be output by using '%%d' in the filename
    "
    			"
    ", argv[0]);
    		return 1;
    	}
    
    	filename = argv[1];
    #endif
    
    //#define RTMP_STREAM
    #ifdef RTMP_STREAM
    	filename = "rtmp://192.168.0.239/live/livestream";
    #else 
    	filename = "1.mp4";
    #endif
    
    	/* allocate the output media context */
    	avformat_alloc_output_context2(&oc, NULL, NULL, filename);
    	if (!oc)
    	{
    		printf("Could not deduce output format from file extension: using MPEG.
    ");
    		avformat_alloc_output_context2(&oc, NULL, /*"mpeg"*/"flv", filename);
    	}
    
    	if (!oc)
    	{
    		return 1;
    	}
    
    	// 强制指定 264 编码
    	oc->oformat->video_codec = CODEC_ID_H264;
    	oc->oformat->audio_codec = CODEC_ID_AAC;
    
    	fmt = oc->oformat;
    
    	/* add the audio and video streams using the default format codecs
    	and initialize the codecs */
    	video_st = NULL;
    	audio_st = NULL;
    	if (fmt->video_codec != CODEC_ID_NONE) {
    		video_st = add_video_stream(oc, fmt->video_codec);
    	}
    	if (fmt->audio_codec != CODEC_ID_NONE) {
    		audio_st = add_audio_stream(oc, fmt->audio_codec);
    	}
    
    	av_dump_format(oc, 0, filename, 1);
    
    	/* now that all the parameters are set, we can open the audio and
    	video codecs and allocate the necessary encode buffers */
    	if (video_st)
    		open_video(oc, video_st);
    	if (audio_st)
    		open_audio(oc, audio_st);
    
    	/* open the output file, if needed */
    	if (!(fmt->flags & AVFMT_NOFILE)) {
    		if (avio_open(&oc->pb, filename, AVIO_FLAG_WRITE) < 0) {
    			fprintf(stderr, "Could not open '%s'
    ", filename);
    			return 1;
    		}
    	}
    
    	/* write the stream header, if any */
    	avformat_write_header(oc, NULL);
    	picture->pts = 0;
    	for(;;)
    	{
    		/* compute current audio and video time */
    		if (audio_st)
    			audio_pts = (double)audio_st->pts.val * audio_st->time_base.num / audio_st->time_base.den;
    		else
    			audio_pts = 0.0;
    
    		if (video_st)
    			video_pts = (double)video_st->pts.val * video_st->time_base.num / video_st->time_base.den;
    		else
    			video_pts = 0.0;
    
    		if ((!audio_st || audio_pts >= STREAM_DURATION) &&
    			(!video_st || video_pts >= STREAM_DURATION))
    			break;
    
    		/* write interleaved audio and video frames */
    		if (!video_st || (video_st && audio_st && audio_pts < video_pts)) {
    			write_audio_frame(oc, audio_st);
    
    		} else {
    			write_video_frame(oc, video_st);
    
    			picture->pts++;
    		}
    	}
    
    	/* write the trailer, if any.  the trailer must be written
    	* before you close the CodecContexts open when you wrote the
    	* header; otherwise write_trailer may try to use memory that
    	* was freed on av_codec_close() */
    	av_write_trailer(oc);
    
    	/* close each codec */
    	if (video_st)
    		close_video(oc, video_st);
    	if (audio_st)
    		close_audio(oc, audio_st);
    
    	/* free the streams */
    	for(i = 0; i < oc->nb_streams; i++) {
    		av_freep(&oc->streams[i]->codec);
    		av_freep(&oc->streams[i]);
    	}
    
    	if (!(fmt->flags & AVFMT_NOFILE)) {
    		/* close the output file */
    		avio_close(oc->pb);
    	}
    
    	/* free the stream */
    	av_free(oc);
    
    	return 0;
    }
    

      

     

  • 相关阅读:
    优酷土豆的Redis服务平台化之路
    [C#]使用Gembox.SpreadSheet向Excel写入数据及图表
    [C#]使用Join与GroupJoin将两个集合进行关联与分组
    [C#]使用TcpListener及TcpClient开发一个简单的Chat工具
    超棒黑客必备清单
    [C#]使用dnSpy对目标程序(EXE或DLL)进行反编译修改并编译运行
    [C#源代码]使用SCPI指令对通信端口(RS232/USB/GPIB/LAN)进行仪器编程
    [C#]使用Costura.Fody将源DLL合并到目标EXE
    [C#]使用ILMerge将源DLL合并到目标EXE(.NET4.6.2)
    详解C#7.0新特性
  • 原文地址:https://www.cnblogs.com/gxh973121/p/3140921.html
Copyright © 2020-2023  润新知