[root@localhost ~]# cd /etc/sysconfig/network-scripts/ [root@localhost network-scripts]# cp ifcfg-eth0 ifcfg-br0 [root@localhost network-scripts]# vi ifcfg-eth0 //改成这样 DEVICE=eth0 HWADDR=00:0C:29:06:A2:35 TYPE=Ethernet UUID=34b706cc-aa46-4be3-91fc-d1f48c301f23 ONBOOT=yes BRIDGE=br0 NM_CONTROLLED=yes BOOTPROTO=static [root@localhost network-scripts]# vi ifcfg-br0 //改成这样 DEVICE=br0 TYPE=Bridge ONBOOT=yes BOOTPROTO=static IPADDR=192.168.216.131 NETMASK=255.255.255.0 GATEWAY=192.168.216.2 DNS=8.8.8.8 [root@localhost network-scripts]# service network restart 正在关闭接口 eth0： bridge br0 does not exist! [确定] 关闭环回接口： [确定] 弹出环回接口： [确定] 弹出界面 eth0： [确定] 弹出界面 br0： Determining if ip address 192.168.216.131 is already in use for device br0... [确定]
操作遇到以下问题：！！！！
[root@localhost network-scripts]# service network restart /* 这里如果10秒以上没有反应，那就需要去虚拟机检查。 登陆--〉 ifconfig 查看eth0是否存在 --〉 ping www.baidu.com （是否通） --〉 ping 网关 （不通，则配置有问题） --〉 （通） 检查ifcfg-eth0 ifcfg-br0是否写对 */
[root@localhost network-scripts]# yum install -y git [root@localhost network-scripts]# git clone https://github.com/jpetazzo/pipework [root@localhost network-scripts]# cp pipework/pipework /usr/local/bin/ [root@localhost network-scripts]# cd //用centos6来弄一个容器 [root@localhost ~]# docker run -itd --net=none --name=ff centos-6-x86 bash 4278a68ee82a..... //没有网络 [root@4278a68ee82a /]# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) [root@4278a68ee82a /]# exit //再次进入宿主机 [root@localhost ~]# rpm -Uvh https://repos.fedorapeople.org/openstack/EOL/openstack-grizzly/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm Retrieving https://repos.fedorapeople.org/openstack/EOL/openstack-grizzly/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm warning: /var/tmp/rpm-tmp.QuEQJe: Header V4 RSA/SHA1 Signature, key ID d97b3247: NOKEY Preparing... ########################################### [100%] 1:iproute ########################################### [100%] //配置一个新的ip，只要是和br0同网段，且没有被用过 [root@localhost ~]# pipework br0 fl 192.168.216.135/24 [root@localhost ~]# docker exec -it fl bash [root@4278a68ee82a /]# ifconfig eth1 Link encap:Ethernet HWaddr E2:9B:98:70:C2:05 inet addr:192.168.216.135 Bcast:192.168.216.255 Mask:255.255.255.0 inet6 addr: fe80::e09b:98ff:fe70:c205/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:510 (510.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) /* 这一步不是特别重要，知道就好 */ //ping的通网关，但是还是不能上网，因为还没有配置网关和上网的路由 [root@4278a68ee82a /]# ping 192.168.216.2 PING 192.168.216.2 (192.168.216.2) 56(84) bytes of data. 64 bytes from 192.168.216.2: icmp_seq=1 ttl=128 time=2.07 ms 64 bytes from 192.168.216.2: icmp_seq=2 ttl=128 time=0.563 ms ^C --- 192.168.216.2 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1498ms rtt min/avg/max/mdev = 0.563/1.319/2.075/0.756 ms [root@4278a68ee82a /]# ping www.qq.com connect: Network is unreachable /* 这就完成了 */