• Remote Desktop File Format


    转自:http://engrmosaic.uncc.edu/mosaic-anywhere/remote-desktop-file-format

    The new Terminal Services client (version 2600 and newer, 5.1.2600.x) introduces quite a few new capabilities.  A major client-side convenience is that connection settings can be saved in an RDP file which can then be easily edited, copied, and distributed.

    Unfortunately, the parameters are not nearly as well documented as the ActiveX control parameters yet; this will presumably change before the .NET server release.

    Which Terminal Services/Remote Desktop Client?

    The newest ones, versions 5.1.2600.x and up.  The client can be downloaded from the Remote Desktop Connection page - and despite the header, it is the client to use for connecting to either Terminal Services or XP Remote Desktop.

    You can install it on any true 32-bit Windows OS except Windows XP and .NET - they already come with their own version.

    Making an RDP File

    You can create an RDP connection file using a text editor; there is nothing special about its structure to prevent this; in fact, the Terminal Services people appear to have been assiduous about making it simple and easy to use; the order in which parameters are placed doesn't even matter.

    The simplest way to do it initially, though, is to run the mstsc client, configure basic settings you want, then choose "Save As..." on the General tab.  You can then open the resulting file in Notepad and work with it.

    RDP File Structure

    The file structure is relatively simple. The standard file consists of several lines; each has parameter name, type, and value, separated by a ":".  Any colons after the second one appear to be ignored (necessary so that file paths can be embedded).  MSTSC also appears to silently ignore anything it cannot parse, so you can insert freeform comments into the file.

    For example, here are two lines which tell MSTSC to establish a 1024x768 desktop when it connects:

    desktopheight:i:768
    desktopi:1024

    The first element in each line is the parameter name.  Immediately following it, after the first colon, is the parameter type; as far as I can tell, there are only 3 types of values -

    • i (integer) This is used for numeric values such as the desktop resolutions above.  All  of the "on-off" values are integers; this may be to allow future expansion of value types, since some - such as audio redirection and keyboard hooking - actually have multiple values.
    • s (string) Almost everything which is not a pure integer.  This includes paths and server names
    • b (binary) apparently only used for hashed password storage

    RDP File Parameters

    Below is a table listing all of the parameters I have encountered so far.  I list the parameter name, type, an example value, and then include notes on usage where possible.

    PARAMETER

     

    VALUE

    NOTES

    alternate shell

    s

    c:winntsystem32 otepad.exe

    Sets the shell to be used within the Terminal Services session. This can be used to set an alternate shell such as progman.exe; you can also use it to set the application which the user runs on logon to the Terminal Server.

    audiomode

    i

    2

    Known values:
    0 - Bring to this computer
    1 - Leave at remote computer
    2 - Do not play

    auto connect

    i

    0

    0 or 1

    autoreconnection enabled

    i

    1

    Set to 1 to connect automatically when file is opened.

    bitmapcachepersistenable

    i

    1

    1 maintains bitmap cache between sessions

    compression

    i

    1

    1 means use extra compressions

    connect to console

    i

    1

    0 - connect to a virtual session
    1 - connect to the console session

    desktopheight

    i

    768

    height of session desktop in pixels

    desktopwidth

    i

     

    width of session desktop in pixels

    disable cursor setting

    i

    0

    ?

    disable full window drag

    i

    1

    set to 1, disables display of window contents while dragging in session

    disable menu anims

    i

    1

    set to 1, disables menu animations in session

    disable themes

    i

    1

    set to 1, disables use of themes in session

    disable wallpaper

    i

    1

    set to 1, disables display of wallpaper in session

    displayconnectionbar

    i

    1

    Set to 1, displays the connection bar in a fullscreen session

    domain

    s

    HQ

    domain name to use for logon

    full address

    s

    192.168.1.1:33389

    IP address/name of server (and optional alternate port)

    keyboardhook

    i

    2

    For applying standard Windows key combinations
    0 - On the local computer
    1 - On the remote computer
    2 - In fullscreen mode only

    maximizeshell

    i

    0

    set to 1, maximizes any alternate shell used in the session

    password 51

    b

    (big long binary hash)

    Ifyou choose to save the connection password, this will be a large binary hash value

    port

    i

    3389

     

    redirectcomports

    i

    1

    set to 1, redirects client COM ports in session (XP/.NET only)

    redirectdrives

    i

    1

    set to 1, redirects client drives in session (XP/.NET only)

    redirectprinters

    i

    1

    set to 1, redirects client printers in session

    redirectsmartcards

    i

    1

    set to 1, redirects client smart cards in session (XP/.NET only)

    screen mode id

    i

    1

    FullScreen vs. normal
    0 - ?
    1 - windowed
    2 - fullscreen

    server port

    i

    3389

    You can specify the port separately from the "full address" parameter. Thanks to James from acmewidgets.com for finding this out!

    session bpp

    i

    16

    bit depth for session - 8, 16, or 24. Only 8 is valid for Windows 2000 Terminal Servers

    shell working directory

    s

    c:program filesmicrosoft office

    Working directory if an alternate shell was specified.

    smart sizing

    i

     

    Scale the client window display of desktop when resizing
    0 or not present - Do not scale
    1 - Scale (Takes extra resources to scale)

    username

    s

    administrator

    name of user logging on

    winposstr

    s

    0,1,0,249,808,876

    Not sure about the details on this one.  There are always 6 comma-separated values.  I would guess that these are presets for position and "window mode" sizes - maximized versus sized.


    Example RDP File

    This is an example RDP connection file. It starts maximized for its desktop size (800x600); color depth is 16-bit; it will attempt to automatically start connecting to 192.168.1.12 on launch; and so on...

    screen mode id:i:1
    desktopi:800
    desktopheight:i:600
    session bpp:i:16
    auto connect:i:1
    full address:s:192.168.1.12
    compression:i:1
    keyboardhook:i:2
    audiomode:i:2
    redirectdrives:i:0
    redirectprinters:i:0
    redirectcomports:i:0
    redirectsmartcards:i:0
    displayconnectionbar:i:1
    username:s:Administrator
    domain:s:AKA
    alternate shell:s:
    shell working directory:s:
    disable wallpaper:i:1
    disable full window drag:i:1
    disable menu anims:i:1
    disable themes:i:1
    bitmapcachepersistenable:i:1

  • 相关阅读:
    POJ 2019
    POJ 3368
    POJ 3264
    POJ 2828
    POJ 3481
    结构光相移法-多频外差原理+实践(上篇)
    基于MAP-MRF的视差估计
    重磅直播|计算深度分割技术的实现与全局效应下的结构光三维重建
    用于类别级物体6D姿态和尺寸估计的标准化物体坐标空间
    通过几道CTF题学习Laravel框架
  • 原文地址:https://www.cnblogs.com/digdeep/p/5278241.html
Copyright © 2020-2023  润新知