• hdu 1010 Tempter of the Bone 深搜+剪枝


    Tempter of the Bone

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
    Total Submission(s): 88774    Accepted Submission(s): 24159


    Problem Description
    The doggie found a bone in an ancient maze, which fascinated him a lot. However, when he picked it up, the maze began to shake, and the doggie could feel the ground sinking. He realized that the bone was a trap, and he tried desperately to get out of this maze.

    The maze was a rectangle with sizes N by M. There was a door in the maze. At the beginning, the door was closed and it would open at the T-th second for a short period of time (less than 1 second). Therefore the doggie had to arrive at the door on exactly the T-th second. In every second, he could move one block to one of the upper, lower, left and right neighboring blocks. Once he entered a block, the ground of this block would start to sink and disappear in the next second. He could not stay at one block for more than one second, nor could he move into a visited block. Can the poor doggie survive? Please help him.
     
    Input
    The input consists of multiple test cases. The first line of each test case contains three integers N, M, and T (1 < N, M < 7; 0 < T < 50), which denote the sizes of the maze and the time at which the door will open, respectively. The next N lines give the maze layout, with each line containing M characters. A character is one of the following:

    'X': a block of wall, which the doggie cannot enter;
    'S': the start point of the doggie;
    'D': the Door; or
    '.': an empty block.

    The input is terminated with three 0's. This test case is not to be processed.
     
    Output
    For each test case, print in one line "YES" if the doggie can survive, or "NO" otherwise.
     
    Sample Input
    4 4 5
    S.X.
    ..X.
    ..XD
    ....
    3 4 5
    S.X.
    ..X.
    ...D
    0 0 0
     
    Sample Output
    NO
    YES
     
    Author
    ZHANG, Zheng
     
    题意:从起点到终点,要求恰好在时间t到达。若能输出YES,反之,NO;
    思路:一开始想着用BFS后来发现BFS求的是最短路径。有可能在不能恰好到达。改成DFS回溯加剪枝。
             2.字符读入,每行都有换行需要用getchar()过滤掉。
     1 #include<cstdio>
     2 #include<cstring>
     3 #include<iostream>
     4 #include<algorithm>
     5 #include<queue>
     6 using namespace std;
     7 #define maxn 50
     8 int n,m,t,flag;
     9 struct Node
    10 {
    11     int x,y;
    12 };
    13 Node st,et,k;
    14 int dx[]={0,0,-1,1};
    15 int dy[]={1,-1,0,0};
    16 int vis[maxn][maxn];
    17 char map[maxn][maxn];
    18 void dfs(int x,int y,int cost)
    19 {
    20     if(flag==1)
    21     return;
    22     if(map[x][y]=='D'&&cost==t)//目标状态:步数为,坐标位置为D;
    23     {
    24         flag=1;
    25         return;
    26     }
    27     int mindis=abs(x-et.x)+abs(y-et.y);  /*当前点到终点的最短距离*/
    28     if(mindis>t-cost||( t-cost-mindis )%2!=0)
    29         return;//奇偶剪枝
    30     for(int i=0;i<4;i++)//扩展方式:上下左右;
    31     {
    32         int nx=x+dx[i];
    33         int ny=y+dy[i];
    34         if(!vis[nx][ny]&&nx>=0&&nx<n&&ny>=0&&ny<m&&map[nx][ny]!='X')
    35         {
    36             //printf("%d %d %d
    ",nx,ny);
    37             vis[nx][ny]=1;
    38             dfs(nx,ny,cost+1);
    39             vis[nx][ny]=0;
    40         }
    41 
    42     }
    43 
    44 }
    45 
    46 int main()
    47 {
    48     while(~scanf("%d%d%d",&n,&m,&t))
    49     {
    50         if(n==0||m==0||t==0)
    51             break;
    52         getchar();
    53         for(int i=0;i<n;i++)
    54         {
    55             for(int j=0;j<m;j++)
    56             {
    57                 scanf("%c",&map[i][j]);
    58                 if(map[i][j]=='S')
    59                 {
    60                     st.x=i;
    61                     st.y=j;
    62                 }
    63                 if(map[i][j]=='D')
    64                 {
    65                     et.x=i;
    66                     et.y=j;
    67                 }
    68 
    69             }
    70             getchar();
    71         }
    72         flag=0;
    73         memset(vis,0,sizeof(vis));
    74         vis[st.x][st.y]=1;
    75         dfs(st.x,st.y,0);//初始状态:S的位置坐标,步数为0;
    76         if(!flag)
    77             printf("NO
    ");
    78         else
    79             printf("YES
    ");
    80 
    81     }
    82 
    83     return 0;
    84 }
  • 相关阅读:
    nagle算法和TCP_NODELAY
    Makefile 中的.PHONY
    Linux--信号阻塞与屏蔽
    Linux的SIGUSR1和SIGUSR2信号
    Github和Git上fork指南
    Python 中函数的 收集参数 机制
    【奥斯卡理财星体系 第二章】丨你该如何做好理财规划
    【奥斯卡理财星体系 第一章】丨你该如何找到理财正确的方向
    【奥斯卡理财星体系 序篇】为什么你需要学习这个理财体系?
    零基础学基金投资系列-08-基金排行榜
  • 原文地址:https://www.cnblogs.com/ZP-Better/p/4639610.html
Copyright © 2020-2023  润新知