• poj 3414 Pots


    Pots
    Time Limit: 1000MS   MemoryLimit: 65536K
            Special Judge

    Description

    You are given two pots, having the volume of A and B liters respectively. The following operations can be performed:

    1. FILL(i)        fill the pot i (1 ≤ ≤ 2) from the tap;
    2. DROP(i)      empty the pot i to the drain;
    3. POUR(i,j)    pour from pot i to pot j; after this operation either the pot j is full (and there may be some water left in the pot i), or the pot i is empty (and all its contents have been moved to the pot j).

    Write a program to find the shortest possible sequence of these operations that will yield exactly C liters of water in one of the pots.

    Input

    On the first and only line are the numbers AB, and C. These are all integers in the range from 1 to 100 and C≤max(A,B).

    Output

    The first line of the output must contain the length of the sequence of operations K. The following K lines must each describe one operation. If there are several sequences of minimal length, output any one of them. If the desired result can’t be achieved, the first and only line of the file must contain the word ‘impossible’.

    Sample Input

    3 5 4

    Sample Output

    6
    FILL(2)
    POUR(2,1)
    DROP(1)
    POUR(2,1)
    FILL(2)
    POUR(2,1)

    Source

    Northeastern Europe 2002, Western Subregion
     
    倒水问题,输出步数和方案
    #include<cstdio>
    #include<queue>
    #include<cstdlib>
    #include<cstring>
    using namespace std;
    int a,b,z,xu;
    bool v[1000000];
    int solution[1000000],cnt,pre[1000000];
    struct node
    {
        int x,y,s,id;
    }cur,nxt;
    queue<node>p;
    void output(int w)
    {
        if(!w) return;
        else output(pre[w]);
        switch(solution[w])
        {
            case 1:printf("FILL(1)
    ");break;
            case 2:printf("FILL(2)
    ");break;
            case 3:printf("DROP(1)
    ");break;
            case 4:printf("DROP(2)
    ");break;
            case 5:printf("POUR(2,1)
    ");break;
            case 6:printf("POUR(1,2)
    ");
        }
    }
    void pan(int i,int j,int w)
    {
        if(i==z||j==z)
        {
            printf("%d
    ",nxt.s);
            output(w);
            exit(0);
        }
    }
    int main()
    {
        while(scanf("%d%d%d",&a,&b,&z)==3)
        {
            if(a==z)
            {
                printf("1
    ");
                printf("FILL(1)
    ");
                return 0;
            }
            else if(b==z) 
            {
                printf("1
    ");
                printf("FILL(2)
    ");
                return 0;
            }
            while(!p.empty()) p.pop(); cnt=0;
            memset(v,0,sizeof(v));
            memset(solution,0,sizeof(solution));
            cur.x=a; cur.y=0; cur.s=1; cur.id=++cnt; solution[cnt]=1;
            p.push(cur);
            cur.x=0; cur.y=b; cur.s=1; cur.id=++cnt; solution[cnt]=2;
            p.push(cur);
            while(!p.empty())
            {
                cur=p.front();
                if(!cur.x)    
                {
                    nxt.x=a; nxt.y=cur.y; nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=1;
                    pan(nxt.x,nxt.y,cnt);
                    if(!v[nxt.x*1000+nxt.y])        
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                }
                if(!cur.y)        
                {
                    nxt.x=cur.x; nxt.y=b; nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=2;
                    pan(nxt.x,nxt.y,cnt);
                    if(!v[nxt.x*1000+nxt.y])
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                }
                if(cur.x)
                {
                    nxt.x=0; nxt.y=cur.y; nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=3;
                    if(!v[nxt.x*1000+nxt.y])
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                }
                if(cur.y)
                {
                    nxt.x=cur.x; nxt.y=0; nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=4;
                    if(!v[nxt.x*1000+nxt.y])
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                }
                if(cur.x||cur.y)
                {
                    xu=a-cur.x;
                    if(cur.y>xu)
                    {
                        nxt.x=a; nxt.y=cur.y-xu;
                    }
                    else 
                    {
                        nxt.x=cur.x+cur.y; nxt.y=0;
                    }
                    nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=5;
                    pan(nxt.x,nxt.y,cnt);
                    if(!v[nxt.x*1000+nxt.y])
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                    xu=b-cur.y;
                    if(cur.x>xu)
                    {
                        nxt.y=b;
                        nxt.x=cur.x-xu;
                    }
                    else 
                    {
                        nxt.y=cur.x+cur.y;
                        nxt.x=0;
                    }
                    nxt.s=cur.s+1;
                    nxt.id=++cnt; pre[cnt]=cur.id; solution[cnt]=6;
                    pan(nxt.x,nxt.y,cnt);
                    if(!v[nxt.x*1000+nxt.y])
                    {
                        v[nxt.x*1000+nxt.y]=true;
                        p.push(nxt);
                    }
                }
                p.pop();
            }
            printf("impossible
    ");
        }
    }
  • 相关阅读:
    oracle保留小数,例如0.00
    线程池读取List<T>实例
    Linq XML
    C# 反射 表达式树 模糊搜索
    MVC权限模块
    .NET-提取字符串实践总结
    2014,码农梦想,先从态度开始!
    Biztalk开发系列之二. (AS2配置)
    测试2
    Biztalk Http 适配器使用.开发系列(一)
  • 原文地址:https://www.cnblogs.com/TheRoadToTheGold/p/6826896.html
Copyright © 2020-2023  润新知