2019 SDN上机第7次作业

1.根据P4教程，将basic和basic_tunnel两个案例程序补充完整，成功运行

补充后的basic代码如下：

#include <core.p4>
#include <v1model.p4>

const bit<16> TYPE_IPV4 = 0x800;

/*************************************************************************
*********************** H E A D E R S  ***********************************
*************************************************************************/

typedef bit<9>  egressSpec_t;
typedef bit<48> macAddr_t;
typedef bit<32> ip4Addr_t;

header ethernet_t {
    macAddr_t dstAddr;
    macAddr_t srcAddr;
    bit<16>   etherType;
}

header ipv4_t {
    bit<4>    version;
    bit<4>    ihl;
    bit<8>    diffserv;
    bit<16>   totalLen;
    bit<16>   identification;
    bit<3>    flags;
    bit<13>   fragOffset;
    bit<8>    ttl;
    bit<8>    protocol;
    bit<16>   hdrChecksum;
    ip4Addr_t srcAddr;
    ip4Addr_t dstAddr;
}

struct metadata {
    /* empty */
}

struct headers {
    ethernet_t   ethernet;
    ipv4_t       ipv4;
}

/*************************************************************************
*********************** P A R S E R  ***********************************
*************************************************************************/

parser MyParser(packet_in packet,
                out headers hdr,
                inout metadata meta,
                inout standard_metadata_t standard_metadata){

    state start {
        transition parser_ethernet; //转移到以太网包头的状态
    }
        
    state packet_ethernet{
        packet.extract(hdr.ethernet);   //提取以太网包头
        transition select(hdr.ethernet.etherType){   //由协议转移到相关状态
            0x0800: parser_ipv4; //ipv4协议
            default: accept;
        }
    }
    state parser_ipv4{
        packet.extract(hdr.ipv4);   //提取ipv4包头
        transition accept;
    }
}


/*************************************************************************
************   C H E C K S U M    V E R I F I C A T I O N   *************
*************************************************************************/

control MyVerifyChecksum(inout headers hdr, inout metadata meta) {   
    apply {  }
}


/*************************************************************************
**************  I N G R E S S   P R O C E S S I N G   *******************
*************************************************************************/

control MyIngress(inout headers hdr,
                  inout metadata meta,
                  inout standard_metadata_t standard_metadata) {
    action drop() {
        mark_to_drop(standard_metadata);
    }
    
    action ipv4_forward(macAddr_t dstAddr, egressSpec_t port) {
        //转发步骤
        standard_metadata.egress_spec = port;   //设置下一跳的出口端口
        hdr.ethernet.srcAddr = hdr.ethernet.dstAddr;    //更新源地址（到达下一跳）
        hdr.ethernet.dstAddr = dstAddr; //更新目标地址
        hdr.ipv4.ttl = hdr.ipv4.ttl - 1;    //ttl减1
    }
    
    table ipv4_lpm {
        key = {
            hdr.ipv4.dstAddr: lpm;
        }
        actions = {
            ipv4_forward;
            drop;
            NoAction;
        }
        size = 1024;
        default_action = NoAction();
    }
    
    apply {
        if (hdr.ipv4.isValid()) {
            ipv4_lpm.apply();
        }
    }
}

/*************************************************************************
****************  E G R E S S   P R O C E S S I N G   *******************
*************************************************************************/

control MyEgress(inout headers hdr,
                 inout metadata meta,
                 inout standard_metadata_t standard_metadata) {
    apply {  }
}

/*************************************************************************
*************   C H E C K S U M    C O M P U T A T I O N   **************
*************************************************************************/

control MyComputeChecksum(inout headers hdr, inout metadata meta) {
     apply {
    update_checksum(
        hdr.ipv4.isValid(),
            { hdr.ipv4.version,
          hdr.ipv4.ihl,
              hdr.ipv4.diffserv,
              hdr.ipv4.totalLen,
              hdr.ipv4.identification,
              hdr.ipv4.flags,
              hdr.ipv4.fragOffset,
              hdr.ipv4.ttl,
              hdr.ipv4.protocol,
              hdr.ipv4.srcAddr,
              hdr.ipv4.dstAddr },
            hdr.ipv4.hdrChecksum,
            HashAlgorithm.csum16);
    }
}


/*************************************************************************
***********************  D E P A R S E R  *******************************
*************************************************************************/

control MyDeparser(packet_out packet, in headers hdr) {
    //数据包重组
    apply {
        packet.emit(hdr.ethernet);  // 这里要注意先后顺序
        packet.emit(hdr.ipv4);
    }
}

/*************************************************************************
***********************  S W I T C H  *******************************
*************************************************************************/

V1Switch(
MyParser(),
MyVerifyChecksum(),
MyIngress(),
MyEgress(),
MyComputeChecksum(),
MyDeparser()
) main;

输入以下指令运行:

make run

测试①：

h1 ping h2

测试②：

pingall

2.补充并运行支持基本隧道协议的basic_tunnel代码

补充后的basic代码如下：

/* -*- P4_16 -*- */
#include <core.p4>
#include <v1model.p4>

const bit<16> TYPE_MYTUNNEL = 0x1212;
const bit<16> TYPE_IPV4 = 0x800;

/*************************************************************************
*********************** H E A D E R S  ***********************************
*************************************************************************/

typedef bit<9>  egressSpec_t;
typedef bit<48> macAddr_t;
typedef bit<32> ip4Addr_t;

header ethernet_t {
    macAddr_t dstAddr;
    macAddr_t srcAddr;
    bit<16>   etherType;
}

header myTunnel_t {
    bit<16> proto_id;
    bit<16> dst_id;
}

header ipv4_t {
    bit<4>    version;
    bit<4>    ihl;
    bit<8>    diffserv;
    bit<16>   totalLen;
    bit<16>   identification;
    bit<3>    flags;
    bit<13>   fragOffset;
    bit<8>    ttl;
    bit<8>    protocol;
    bit<16>   hdrChecksum;
    ip4Addr_t srcAddr;
    ip4Addr_t dstAddr;
}

struct metadata {
    /* empty */
}

struct headers {
    ethernet_t   ethernet;
    myTunnel_t   myTunnel;
    ipv4_t       ipv4;
}

/*************************************************************************
*********************** P A R S E R  ***********************************
*************************************************************************/

parser MyParser(packet_in packet,
                out headers hdr,
                inout metadata meta,
                inout standard_metadata_t standard_metadata) {

    state start {
        transition parse_ethernet;
    }

    state parse_ethernet {
        packet.extract(hdr.ethernet);
        transition select(hdr.ethernet.etherType) {
            TYPE_MYTUNNEL: parse_myTunnel;
            TYPE_IPV4: parse_ipv4;
            default: accept;
        }
    }

    state parse_myTunnel {
        packet.extract(hdr.myTunnel);
        transition select(hdr.myTunnel.proto_id) {
            TYPE_IPV4: parse_ipv4;
            default: accept;
        }
    }

    state parse_ipv4 {
        packet.extract(hdr.ipv4);
        transition accept;
    }

}

/*************************************************************************
************   C H E C K S U M    V E R I F I C A T I O N   *************
*************************************************************************/

control MyVerifyChecksum(inout headers hdr, inout metadata meta) {   
    apply {  }
}


/*************************************************************************
**************  I N G R E S S   P R O C E S S I N G   *******************
*************************************************************************/

control MyIngress(inout headers hdr,
                  inout metadata meta,
                  inout standard_metadata_t standard_metadata) {
    action drop() {
        mark_to_drop(standard_metadata);
    }
    
    action ipv4_forward(macAddr_t dstAddr, egressSpec_t port) {
        standard_metadata.egress_spec = port;
        hdr.ethernet.srcAddr = hdr.ethernet.dstAddr;
        hdr.ethernet.dstAddr = dstAddr;
        hdr.ipv4.ttl = hdr.ipv4.ttl - 1;
    }
    
    table ipv4_lpm {
        key = {
            hdr.ipv4.dstAddr: lpm;
        }
        actions = {
            ipv4_forward;
            drop;
            NoAction;
        }
        size = 1024;
        default_action = drop();
    }
    
    action myTunnel_forward(egressSpec_t port) {
        standard_metadata.egress_spec = port;
    }

    table myTunnel_exact {
        key = {
            hdr.myTunnel.dst_id: exact;
        }
        actions = {
            myTunnel_forward;
            drop;
        }
        size = 1024;
        default_action = drop();
    }

    apply {
        if (hdr.ipv4.isValid() && !hdr.myTunnel.isValid()) {
            // Process only non-tunneled IPv4 packets
            ipv4_lpm.apply();
        }

        if (hdr.myTunnel.isValid()) {
            // process tunneled packets
            myTunnel_exact.apply();
        }
    }
}

/*************************************************************************
****************  E G R E S S   P R O C E S S I N G   *******************
*************************************************************************/

control MyEgress(inout headers hdr,
                 inout metadata meta,
                 inout standard_metadata_t standard_metadata) {
    apply {  }
}

/*************************************************************************
*************   C H E C K S U M    C O M P U T A T I O N   **************
*************************************************************************/

control MyComputeChecksum(inout headers  hdr, inout metadata meta) {
     apply {
    update_checksum(
        hdr.ipv4.isValid(),
            { hdr.ipv4.version,
          hdr.ipv4.ihl,
              hdr.ipv4.diffserv,
              hdr.ipv4.totalLen,
              hdr.ipv4.identification,
              hdr.ipv4.flags,
              hdr.ipv4.fragOffset,
              hdr.ipv4.ttl,
              hdr.ipv4.protocol,
              hdr.ipv4.srcAddr,
              hdr.ipv4.dstAddr },
            hdr.ipv4.hdrChecksum,
            HashAlgorithm.csum16);
    }
}

/*************************************************************************
***********************  D E P A R S E R  *******************************
*************************************************************************/

control MyDeparser(packet_out packet, in headers hdr) {
    apply {
        packet.emit(hdr.ethernet);
        packet.emit(hdr.myTunnel);
        packet.emit(hdr.ipv4);
    }
}

/*************************************************************************
***********************  S W I T C H  *******************************
*************************************************************************/

V1Switch(
MyParser(),
MyVerifyChecksum(),
MyIngress(),
MyEgress(),
MyComputeChecksum(),
MyDeparser()
) main;

运行编译：

make run

输入：

xterm h1 h2

模拟两个终端

在h2命令界面输入：

./receive.py

在h1命令界面输入

./send.py 10.0.2.2 "test1"

在h1修改IP地址，再发送移除信息

./send.py 10.0.3.3 "test2" --dst_id 2

3.对P4的认识和体会

p4安装过程很麻烦，最后屈服用虚拟机结束实验，好在实验过程还算简单。P4编程语言的出现解决了这一窘境，其对交换机内部数据报处理过程的灵活定义让网络设计者可以自上而下地定义数据报的完整处理流程。P4作为数据平面领域专用语言(DSL)描述了交换机内部对数据报报文的处理逻辑