一、安装 scons
下载地址：http://sourceforge.net/projects/scons/files/scons/2.1.0/scons-2.1.0.tar.gz/download
百度网盘：链接：https://pan.baidu.com/s/1tW57c9s3iCeoDi4OIDyEPQ 密码：2wd5
解压：tar -zvxf scons-2.1.0.tar.gz
进入到解压目录scons-2.1.0 执行命令：
sudo python setup.py install
二、安装 Jsoncpp
下载地址：http://sourceforge.net/projects/jsoncpp/
百度网盘：链接：https://pan.baidu.com/s/1tW57c9s3iCeoDi4OIDyEPQ 密码：2wd5
解压：tar -zvxf jsoncpp-src-0.5.0.tar.gz
进入到jsoncpp解压目录下，执行命令：
sudo scons platform=linux-gcc
将/jsoncpp-src-0.5.0/include/目录下的json文件夹拷贝到 /usr/local/include/
将jsoncpp-src-0.5.0/libs/linux-gcc-4.9.1/目录下的libjson_linux-gcc-4.9.1_libmt.a 拷贝到 /usr/local/lib/ 下，并为了方便使用，将其重命名为libjson.a
三、使用libjson.a
makefile：
TARGET=main
INC=-I/usr/local/include/libmongoc-1.0 -I/usr/local/include/libbson-1.0/ -I/usr/local/include/json
LIB_PATH=-L/usr/local/lib
LIB=-lmongoc-1.0 -lbson-1.0 /usr/local/lib/libjson.a
CFLAGS:=-Wall -g -O0 -lrt -rdynamic -fPIC -Wl,-rpath=./ $(INC) $(LIB_PATH)
CPPFLAGS:=$(CFLAGS)
SRC=$(shell echo *.cpp)
OBJ=$(patsubst %.cpp,%.o,$(SRC))
all: $(TARGET)
$(TARGET): $(OBJ)
$(CXX) $^ $(CFLAGS) $(LIB) -o $@
clean:
rm -f $(OBJ)
rm -f $(TARGET)
json语法 可见：http://www.cnblogs.com/SZxiaochun/p/5866401.html 的 Demo
四、编译报错
error: missing binary operator before token "("
/usr/include/wchar.h:104:1: error: ‘__BEGIN_NAMESPACE_C99’ does not name a type
/usr/include/wchar.h:107:1: error: ‘__END_NAMESPACE_C99’ does not name a type
/usr/include/wchar.h:135:1: error: ‘__END_NAMESPACE_STD’ does not name a type
/usr/include/wchar.h:149:6: error: expected initializer before ‘__THROW’
/usr/include/wchar.h:153:39: error: expected initializer before ‘__THROW’
/usr/include/wchar.h:157:6: error: expected initializer before ‘__THROW’
/usr/include/wchar.h:161:6: error: expected initializer before ‘__THROW’
/usr/include/c++/4.6/cwchar:143:11: error: ‘::btowc’ has not been declared
/usr/include/c++/4.6/cwchar:144:11: error: ‘::fgetwc’ has not been declared
/usr/include/c++/4.6/cwchar:148:11: error: ‘::fwide’ has not been declared
/usr/include/c++/4.6/cwchar:149:11: error: ‘::fwprintf’ has not been declared
/usr/include/c++/4.6/cwchar:150:11: error: ‘::fwscanf’ has not been declared
/usr/include/c++/4.6/cwchar:215:55: error: invalid conversion from ‘const wchar_t*’ to ‘wchar_t*’ [-fpermissive]
/usr/include/c++/4.6/cwchar:214:3: error: initializing argument 1 of ‘wchar_t* std::wcschr(wchar_t*, wchar_t)’ [-fpermissive]
/usr/include/locale.h: At global scope:
/usr/include/locale.h:32:1: error: ‘__BEGIN_DECLS’ does not name a type
/usr/include/locale.h:125:65: error: expected initializer before ‘__THROW’
/usr/include/locale.h:128:40: error: expected initializer before ‘__THROW’
/usr/include/locale.h:130:1: error: ‘__END_NAMESPACE_STD’ does not name a type
......
原因：
jsoncpp中有一个features.h文件，在/usr/include下也有一个同名的文件，所以就出现文件依赖顺序等问题，一旦搞混，就报了一堆错
解决方法：
把jsoncpp的 features.h重命名，然后json.h与reader.h要引用它，在相应的位置换成新的文件名字就ok了。