• POJ 2251 Dungeon Master【三维BFS模板】


    Dungeon Master
    Time Limit: 1000MS Memory Limit: 65536K
    Total Submissions: 45743 Accepted: 17256
    Description

    You are trapped in a 3D dungeon and need to find the quickest way out! The dungeon is composed of unit cubes which may or may not be filled with rock. It takes one minute to move one unit north, south, east, west, up or down. You cannot move diagonally and the maze is surrounded by solid rock on all sides.

    Is an escape possible? If yes, how long will it take?
    Input

    The input consists of a number of dungeons. Each dungeon description starts with a line containing three integers L, R and C (all limited to 30 in size).
    L is the number of levels making up the dungeon.
    R and C are the number of rows and columns making up the plan of each level.
    Then there will follow L blocks of R lines each containing C characters. Each character describes one cell of the dungeon. A cell full of rock is indicated by a '#' and empty cells are represented by a '.'. Your starting position is indicated by 'S' and the exit by the letter 'E'. There's a single blank line after each level. Input is terminated by three zeroes for L, R and C.
    Output

    Each maze generates one line of output. If it is possible to reach the exit, print a line of the form
    Escaped in x minute(s).

    where x is replaced by the shortest time it takes to escape.
    If it is not possible to escape, print the line
    Trapped!
    Sample Input

    3 4 5
    S....
    .###.
    .##..
    ###.#
    
    #####
    #####
    ##.##
    ##...
    
    #####
    #####
    #.###
    ####E
    
    1 3 3
    S##
    #E#
    ###
    
    0 0 0
    

    Sample Output

    Escaped in 11 minute(s).
    Trapped!
    Source

    Ulm Local 1997

    【代码】:

    #include<cstdio>
    #include<string>
    #include<cstdlib>
    #include<cmath>
    #include<iostream>
    #include<cstring>
    #include<set>
    #include<queue>
    #include<algorithm>
    #include<vector>
    #include<map>
    #include<cctype>
    #include<stack>
    #include<sstream>
    #include<list>
    #include<assert.h>
    #include<bitset>
    #include<numeric>
    using namespace std;
    
    typedef long long LL;
    typedef unsigned long long ULL;
    typedef pair<int,int> P;
    const int INF = 0x3f3f3f3f;
    const LL LNF = 1e18;
    const int maxn = 1e6;
    const int maxm = 100;
    const double PI = acos(-1.0);
    const double eps = 1e-8;
    const int dx[] = {-1,1,0,0,1,1,-1,-1};
    const int dy[] = {0,0,1,-1,1,-1,1,-1};
    const int mon[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
    const int monn[] = {0, 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
    
    const int dir[6][3]={ {0,0,1},{0,0,-1},{-1,0,0},{1,0,0},{0,1,0},{0,-1,0} };
    struct node
    {
        int x;
        int y;
        int z;
        int step;
    }st,ed;
    char maze[50][50][50]; //迷宫
    int vis[50][50][50];   //表示是否访问过
    int l,r,c; //l表示层数 r表示行数 c表示列数
    int sx,sy,sz;  //起点坐标
    int ex,ey,ez;
    
    int check(int z,int x,int y) //判断该点是否可以走
    {
        if(x>=0&&x<r&&y>=0&&y<c&&z>=0&&z<l&&maze[z][x][y]!='#')
            return 1;
        else
            return 0;
    }
    
    void bfs()
    {
        memset(vis,0,sizeof(vis));
        queue <node> q;
        //把起点放入队列,并且标记
        //node st,ed;
        st.x = sx;
        st.y = sy;
        st.z = sz;
        st.step = 0;
        vis[st.z][st.x][st.y]=1;
        q.push(st);
        //不断循环知道队列的长度为0
        while(!q.empty())
        {
            //从队列的最前端取除元素看是否有路可通,如果没有路则返回这个点
            st = q.front();
            q.pop();
            //如果取出来是终点,则证明逃出地牢 搜索结束
            if(maze[st.z][st.x][st.y]=='E')
            {
                printf("Escaped in %d minute(s).
    ",st.step);
                return;
            }
            //六个方向遍历
            for(int i = 0 ; i < 6 ;i++)
            {
                ed.z = st.z + dir[i][0];
                ed.x = st.x + dir[i][1];
                ed.y = st.y + dir[i][2];
                ed.step = st.step+1;
                if(check(ed.z,ed.x,ed.y)==0) //如果此方向不通就继续判断其他方向
                    continue;
                if(vis[ed.z][ed.x][ed.y]==0)
                {
                    vis[ed.z][ed.x][ed.y] = 1;
                    q.push(ed);
                }
            }
        }
        printf("Trapped!
    ");
    }
    
    int main()
    {
        while(scanf("%d%d%d",&l,&r,&c)&&l&&r&&c)
        {
            for(int i = 0; i < l; i++)//输入各个点的坐标
            {
                for(int j = 0; j < r; j++)
                {
                    scanf("%s",maze[i][j]);
                    for(int k = 0; k < c ; k++)
                    {
                        if(maze[i][j][k]=='S')
                        {
                            sz = i;
                            sx = j;
                            sy = k;
                        }
    
                    }
                }
            }
    
            bfs();
        }
    }
    
    
  • 相关阅读:
    最易理解的傅里叶分析讲解
    python获取最大、最小值
    机器学习周志华——学习器性能度量
    机器学习周志华——模型评估与选择
    机器学习周志华——机器学习重要会议及期刊
    机器学习周志华——机器学习的应用领域
    机器学习周志华——机器学习的发展
    在github上保存vscode的配置(后续重新安装vscode时,可以十分方便地从github上下载安装这个保存的配置)
    windows 10 macbook air 无声音
    监控 4MM 6MM 8MM 选择
  • 原文地址:https://www.cnblogs.com/Roni-i/p/9192579.html
Copyright © 2020-2023  润新知