上一篇博文地址如下：
https://www.cnblogs.com/Mr-Wangblogs/p/13131987.html
Step11：Generate the Model 输出模型
输出FEA Based Modeler 2D模型：
-
Select Modeler/FEA Based Modeler (2D)/Start Model Generation menu item or press in the Toolbar. A warning message about the parallel connection of windings is shown
选择"基于Modeler /基于FEA的Modeler（2D）/开始模型生成"菜单项，或在工具栏中按。 显示有关绕组并联的警告消息
-
Click OK to dismiss the window. The UPM FEA Modeler window appears. The window says that Magnetic Analysis and Electric Analysis will be done using Maxwell 2D and a Curve Fitting will be run at the end of the modeling process.
单击确定以关闭该窗口。 出现" UPM FEA Modeler"窗口。 窗口显示将使用Maxwell 2D进行磁分析和电分析，并在建模过程结束时运行曲线拟合。
-
Click Start to start the modeling process. The process takes approximately 20 minutes to complete. Once the FEA-based model generation procedure is finished, a message appears, telling you that the parameter extraction is completed.
单击开始以开始建模过程。 该过程大约需要20分钟才能完成。 基于FEA的模型生成过程完成后，将出现一条消息，告诉您参数提取已完成。
-
Click OK to dismiss this message. A message appears, telling you the path to the 2D model netlist.
单击确定以消除此消息。 出现一条消息，告诉您2D模型网表的路径。
-
Click OK to dismiss this message. The UPM MGen window appears.
单击确定以消除此消息。 出现" UPM MGen"窗口。
输出结构如下图所示
Z1_1
Z1_2
Z1_3
Z1_4
Z1_5
Z1_6
Z2_2
Z2_3
Z2_4
Z2_5
Z2_6
Z3_3
Z3_4
Z3_5
Z3_6
Z4_4
Z4_5
Z4_6
Z5_5
Z5_6
Z6_6
- Click Exit in the UPM MGen window to close it.
- Click Exit to close the UPM FEA Modeler window.
Step12：Explore the Results输出结果
Choose the Results/FEA Based (2D)/FEA Based Results menu item
Capacitive Effects:
AC Resistance 信息，通过选择不同的绕组中的交流绕组信息。
选中Show DC resistance 可以查看直流电阻信息
各绕组的直流电阻和电感信息
不同绕组的漏感信息
