• 【二进制拆分多重背包】【HDU1059】【Dividing】


    Dividing

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
    Total Submission(s): 18190    Accepted Submission(s): 5080


    Problem Description
    Marsha and Bill own a collection of marbles. They want to split the collection among themselves so that both receive an equal share of the marbles. This would be easy if all the marbles had the same value, because then they could just split the collection in half. But unfortunately, some of the marbles are larger, or more beautiful than others. So, Marsha and Bill start by assigning a value, a natural number between one and six, to each marble. Now they want to divide the marbles so that each of them gets the same total value. 
    Unfortunately, they realize that it might be impossible to divide the marbles in this way (even if the total value of all marbles is even). For example, if there are one marble of value 1, one of value 3 and two of value 4, then they cannot be split into sets of equal value. So, they ask you to write a program that checks whether there is a fair partition of the marbles.
     

    Input
    Each line in the input describes one collection of marbles to be divided. The lines consist of six non-negative integers n1, n2, ..., n6, where ni is the number of marbles of value i. So, the example from above would be described by the input-line ``1 0 1 2 0 0''. The maximum total number of marbles will be 20000. 

    The last line of the input file will be ``0 0 0 0 0 0''; do not process this line.
     

    Output
    For each colletcion, output ``Collection #k:'', where k is the number of the test case, and then either ``Can be divided.'' or ``Can't be divided.''. 

    Output a blank line after each test case.
     

    Sample Input
    1 0 1 2 0 0 1 0 0 0 1 1 0 0 0 0 0 0
     

    Sample Output
    Collection #1: Can't be divided. Collection #2: Can be divided.
     

    Source
     

    一开始还觉得有点难写。。


    后来AC才感觉自己编码能力已经很强了。。


    主要是这个拆分函数就OK了


    void solve()
    {
    	for(int i=1;i<=6;i++)
    	{
    		int temp=0;
    		while(n[i]>0)
    		{
    			if(n[i]>=ER[temp])
    				A[++tot]=i*ER[temp];
    			else 
    				A[++tot]=i*n[i];
    			n[i]=n[i]-A[tot]/i;
    			temp++;
    		}
    	}	
    }


    完整代码如下:

    #include <cstdio>  
    #include <cstdlib>  
    #include <cmath>  
    #include <cstring>  
    #include <ctime>  
    #include <algorithm>  
    #include <iostream>
    #include <sstream>
    #include <string>
    #define oo 0x13131313   
    #define MAX 2100000000
    using namespace std;
    void init()
    {
    	freopen("a.in","r",stdin);
    	freopen("a.out","w",stdout);
    }
    int n[10];
    int F[100001];
    int ER[100];
    int K;
    int A[600];
    int tot=0; //总数 
    void YCL()
    {
    	memset(F,0,sizeof(F));
    	tot=0; 
    	K=0;
    	for(int i=1;i<=6;i++)
    		{
    			K+=i*n[i];
    		}
    	for(int i=1;i<=K/2;i++)
    	F[i]=MAX;
    	F[0]=0;
    }
    void ER1()
    {
    	ER[0]=1;
    	for(int i=1;i<=15;i++)
    	{
    		ER[i]=ER[i-1]*2;
    	}
    }
    void solve()
    {
    	for(int i=1;i<=6;i++)
    	{
    		int temp=0;
    		while(n[i]>0)
    		{
    			if(n[i]>=ER[temp])
    				A[++tot]=i*ER[temp];
    			else 
    				A[++tot]=i*n[i];
    			n[i]=n[i]-A[tot]/i;
    			temp++;
    		}
    	}	
    }
    int main()
    {
    //	init();
    	int CASE=0;
    	ER1();			//得到二的倍数 
    	while(cin>>n[1]>>n[2]>>n[3]>>n[4]>>n[5]>>n[6]&&(n[1]||n[2]||n[3]||n[4]||n[5]||n[6]))
    	{
    		CASE++;
    		YCL();			//计算K 
    		solve();        //拆分开始 
    		if(K%2==0)
    		{
    			for(int i=1;i<=tot;i++)
    			 for(int j=K/2;j>=0;j--)
    			   {
    			   	if(j-A[i]>=0)
    			   	F[j]=min(F[j],F[j-A[i]]);
    			   }
    			printf("Collection #%d:
    ",CASE);
    			if(F[K/2]!=MAX) 
    		{
    			printf("Can be divided.
    
    ");
    		}
    		else 
    		{
    				printf("Can't be divided.
    
    ");
    		}
    		}
    		else
    		{
    			printf("Collection #%d:
    ",CASE);
    			printf("Can't be divided.
    
    ");
    		}
    	}
    	return 0;
    }
      

    恩 再补一道同类型的题目


    HDU(3732)

    Ahui Writes Word

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)
    Total Submission(s): 2214    Accepted Submission(s): 811


    Problem Description
    We all know that English is very important, so Ahui strive for this in order to learn more English words. To know that word has its value and complexity of writing (the length of each word does not exceed 10 by only lowercase letters), Ahui wrote the complexity of the total is less than or equal to C.
    Question: the maximum value Ahui can get.
    Note: input words will not be the same.
     

    Input
    The first line of each test case are two integer N , C, representing the number of Ahui’s words and the total complexity of written words. (1 ≤ N ≤ 100000, 1 ≤ C ≤ 10000)
    Each of the next N line are a string and two integer, representing the word, the value(Vi ) and the complexity(Ci ). (0 ≤ Vi , Ci ≤ 10)
     

    Output
    Output the maximum value in a single line for each test case.
     

    Sample Input
    5 20 go 5 8 think 3 7 big 7 4 read 2 6 write 3 5
     

    Sample Output
    15
    Hint
    Input data is huge,please use “scanf(“%s”,s)”
     

    #include <cstdio>  
    #include <cstdlib>  
    #include <cmath>  
    #include <cstring>  
    #include <ctime>  
    #include <algorithm>  
    #include <iostream>
    #include <sstream>
    #include <string>
    #define oo 0x13131313   
    using namespace std;
    int N,C;
    char buffer[30];
    int map[20][22];
    int ER[30];
    int tot;
    int v[3000];
    int w[3000];
    int F[10001];
    void ER1()
    {
    	ER[0]=1;
    	for(int i=1;i<=20;i++)
    	{
    		ER[i]=ER[i-1]*2;
    	}
    }
    void input()
    {
    	int a,b;
    	tot=0;
    	memset(map,0,sizeof(map));
    	memset(F,0,sizeof(F));
    	for(int i=1;i<=N;i++)
    	{
    		scanf("%s %d %d",buffer,&a,&b);
    		map[a][b]++;
    	}
    }
    void init()
    {
    	freopen("a.in","r",stdin);
    	freopen("a.out","w",stdout);
    }
    void solve()
    {
    	for(int i=1;i<=10;i++)
    	 for(int j=0;j<=10;j++)
    	 {
    	 	int temp=0;
    		while(map[i][j]>0)
    	 	{
    	 		if(map[i][j]>=ER[temp])
    			{
    				v[++tot]=ER[temp]*i;
    				w[tot]=ER[temp]*j;
    			}
    			else
    			{
    				v[++tot]=map[i][j]*i;
    				w[tot]=map[i][j]*j;
    			}
    			{
    				map[i][j]=map[i][j]-v[tot]/i;
    				temp++;
    			}
    		}
    	 }
    }
    void dp()
    {
    	for(int i=1;i<=tot;i++)
    	 for(int j=C;j>=0;j--)
    	 {
    	 	if(j-w[i]>=0)
    	 	F[j]=max(F[j],F[j-w[i]]+v[i]);
    	 }
    }
    int main()
    {
    //	init();
    	ER1();
    	while(cin>>N>>C)
    	{
    		input();
    		solve();
    		dp();
    		printf("%d
    ",F[C]);
    	}
    	return 0;
    }
      


  • 相关阅读:
    C# winForm webBrowser页面中js调用winForm类方法(转)
    Shader开发工具: PVRShaman
    创建压缩纹理的工具
    Andriod NDK编译的时候无法使用math.h的函数。
    mongodb自动关闭:页面文件太小,无法完成操作
    通读cheerio API
    How to skip to next iteration in jQuery.each() util?
    在javascript中substr和substring的区别是什么
    运行代码时报linker command failed with exit code 1 错误
    软件开发模式对比(瀑布、迭代、螺旋、敏捷)
  • 原文地址:https://www.cnblogs.com/zy691357966/p/5480417.html
Copyright © 2020-2023  润新知