• 湖南大学ACM程序设计新生杯大赛(同步赛)J


    题目描述

    Once there was a pig, which was very fond of treasure hunting. One day, when it woke up, it found itself in a strange land of treasure. As for how to come in, or how to go out, no ways to know. Sad.

    The good news is, it was lucky that it got the treasure map.

    But there is a bad news too, this map is an encrypted map.

    You can think of it as a matrix of R*C. Each grid is a number of Hexadecimal(十六进制), that is the number is between {‘0’,’1’,…’9’,’A’,’B’,…,’F’}, and the 4 length Binary number(4位二进制数) corresponding is the real treasure map.

    For example, the number '0' on the encrypted graph represents the actual map ‘0000’, and '1' represents the actual map ‘0001’, ... The 'A' represents the actual map ‘1010’, and 'F' represents the actual map ‘1111’.

    The owner of the treasure is very clever, he build some insuperable wall in the treasure to avoid stealing, we use ‘0’ to describe it. Obviously ‘1’ indicated that this grid bury exactly one diamond.

    The pig can only walk up to four adjacent squares in the upper, lower, left and right directions at a time. Wherever it goes, it will dig out the diamond in this grid(if there is diamond buried in the grid) and put the diamond in its own package.

    Though it has got the map, but doesn't know where it is in the peach blossom trap now, that means it could be at any ‘.’ in the matrix. It finds you smart to tell it how many diamonds it will get at most.

    输入描述:

    Multiple groups of test case. (no more than 10 groups. )
    The first line of each group contains two numbers R and C,(0<=R, C<=3000), representing the number of rows and the number of columns of peach blossom trap, respectively. Stop the program when R and C are both 0.
    Then there are next R lines, each line contains C characters, describe as above.
    It is guarantee all the input is legal.

    输出描述:

    For each test case, output the answer on each line, representing the most number of diamonds can be obtained by the pig.
    示例1

    输入

    5 2
    E8
    23
    52
    78
    01
    
    3 1
    0
    4
    0
    
    0 0

    输出

    6
    1

    说明

    In the first example, the real treasure map is:
    11101000
    00100011
    01010010
    01111000
    00000001
    So it is possible to dig out 6 diamonds at most.

    题解

    $bfs$,压位。

    主要是要想办法省内存,$01$矩阵可以压位,每$32$位$01$串拿一个$int$表示即可。

    然后就是普通的$bfs$,队列的内存峰值也只有$1000$个位置的数量级。

    #include <bits/stdc++.h>
    using namespace std;
    
    const int maxn = 3000 + 10;
    int r, c;
    char s[maxn];
    unsigned int m[maxn][450];
    int f[maxn * 4];
    int st[maxn], cnt;
    
    int dir[4][2] = {
      {-1, 0},
      {1, 0},
      {0, -1},
      {0, 1},
    };
    
    int out(int x, int y) {
      if(x < 0 || x >= r) return 1;
      if(y < 0 || y >= 4 * c) return 1;
      return 0;
    }
    
    int Get(int x, int y) {
      unsigned int p = (unsigned)(1 << (y % 32));
      if(m[x][y / 32] & p) return 1;
      return 0;
    }
    
    void Set(int x, int y) {
      unsigned int p = (unsigned)(1 << (y % 32));
      m[x][y / 32] = m[x][y / 32] ^ p;
    }
    
    int main() {
      while(~scanf("%d%d", &r, &c)) {
        if(r == 0 && c == 0) break;
        for(int i = 0; i < r; i ++) {
          for(int j = 0; j < 400; j ++) {
            m[i][j] = 0;
          }
        }
        for(int i = 0; i < r; i ++) {
          scanf("%s", s);
          int sz = 0;
          for(int j = 0; j < c; j ++) {
            int num;
            if(s[j] >= '0' && s[j] <= '9') num = s[j] - '0';
            else num = s[j] - 'A' + 10;
    
            cnt = 0;
            for(int k = 0; k < 4; k ++) {
              st[cnt ++] = (num & (1 << k)) ? 1 : 0;
            }
            for(int k = 3; k >= 0; k --) {
              f[sz ++] = st[k];
            }
          }
          for(int j = 0; j < sz; j ++) {
            m[i][j / 32] = m[i][j / 32] + (unsigned)(f[j] * (1 << (j % 32)));
          }
        }
    
        int ans = 0;
    
        for(int i = 0; i < r; i ++) {
          for(int j = 0; j < 4 * c; j ++) {
            if(Get(i, j) == 0) continue;
            int sum = 0;
            queue<int> Q;
            Q.push(i * 4 * c + j);
            Set(i, j);
            while(!Q.empty()) {
              int h = Q.front();
              int x = h / (4 * c);
              int y = h % (4 * c);
              Q.pop();
              sum ++;
              for(int i = 0; i < 4; i ++) {
                int tx = x + dir[i][0];
                int ty = y + dir[i][1];
                if(out(tx, ty)) continue;
                if(Get(tx, ty) == 0) continue;
                Q.push(tx * 4 * c + ty);
                Set(tx, ty);
              }
            }
            ans = max(ans, sum);
            if(ans > r*c*2) break;
          }
          if(ans > r*c*2) break;
        }
    
        printf("%d
    ", ans);
      }
      return 0;
    }
    

      

  • 相关阅读:
    数据库数据格式化之Kettle Spoon
    NopCommerce开源项目中很基础但是很实用的C# Helper方法
    oracle 两个逗号分割的字符串 如何判断是否其中有相同值
    MongoDB+MongoVUE安装及入门
    C#中Dictionary<TKey,TValue>排序方式
    kettle的基本介绍
    Kettle能做什么?
    oracle like 条件拼接
    loading加载和layer.js
    关于bootstrap的treeview不显示多选(复选框)的问题,以及联动选择的问题,外加多选后取值
  • 原文地址:https://www.cnblogs.com/zufezzt/p/8108573.html
Copyright © 2020-2023  润新知