Windows 或 Linux 系统配置成NTP服务器,思科交换机配置成NTP客户端
##创建VLAN 10
SW01>enable
SW01#vlan database
SW01(vlan)#vlan 10 name VLAN10
SW01(vlan)#exit
##配置VLAN 10
SW01#configure terminal
SW01(config)#interface vlan 10
SW01(config-if)#ip address 192.168.10.1 255.255.255.0
SW01(config-if)#exit
##VLAN 10分配端口
SW01(config)#interface range fastEthernet 0/1-10
SW01(config-if-range)#SW01port access vlan 10
SW01(config-if-range)#SW01port mode access
SW01(config-if-range)#no shutdown
SW01(config-if-range)#exit
##激活fa0/24 Trunk
SW01(config)#interface fastEthernet 0/24
SW01(config-if)#SW01port trunk encapsulation dot1q
SW01(config-if)#SW01port mode trunk
SW01(config-if)#no shutdown
SW01(config-if)#exit
##配置NTP服务连接
SW01(config)#ntp server 192.168.10.10
##配置时区
SW01(config)#clock timezone Peking 8
SW01(config)#exit
##显示与维护
SW01#show clock
SW01#show ntp status