转载请说明出处：http://blog.csdn.net/zhubaohua_bupt/article/details/51866700
自己在stereosgbm.cpp的最后加了一个把灰度图像显示成伪彩色图像的函数，为的是更好的观察视差图。
myStereoSGBM::GenerateFalseMap(cv::Mat &src, cv::Mat &disp)
下面分别给出 main.cpp、stereosgbm.h（从calib3d.hpp里面提取出来，opencv版本2.4.9）、stereosgbm.cpp。配置完opencv环境后即可使用。有兴趣的朋友可以研究一下代码。
main.cpp
#include"sgbm.h"
int main()
{
Mat img111 = imread("E:/matchpic/testbanch_data/raindeer_left.pgm", 0);
Mat img222 = imread("E:/matchpic/testbanch_data/raindeer_right.pgm", 0);
imshow("left",img111);
waitKey(10);
cv::myStereoSGBM sgbm;
int SADWindowSize = 5;
sgbm.preFilterCap = 63 ;
sgbm.SADWindowSize = SADWindowSize > 0 ? SADWindowSize : 3;
int cn = img111.channels();
int numberOfDisparities=128;
sgbm.P1 = 8*cn*sgbm.SADWindowSize*sgbm.SADWindowSize;
sgbm.P2 = 32*cn*sgbm.SADWindowSize*sgbm.SADWindowSize;
sgbm.minDisparity = 0;
sgbm.numberOfDisparities = numberOfDisparities;
sgbm.uniquenessRatio = 10;
sgbm.speckleWindowSize =100;
sgbm.speckleRange = 10;
sgbm.disp12MaxDiff = 1;
sgbm( img111, img222,disp );//disp是short类型
Mat disp8,color(disp.size(),CV_8UC3);
disp.convertTo(disp8, CV_8U, 255/(numberOfDisparities*16.));//转化成uchar显示
sgbm.GenerateFalseMap(disp8,color);
imshow("",color);
imshow("",disp8);
waitKey(10);
}
stereosgbm.h
<pre name="code" class="html"><pre name="code" class="html">#include"opencv2/opencv.hpp"
#include<iostream>
using namespace cv;
using namespace std;
namespace cv
{
class myStereoSGBM
{
public:
myStereoSGBM( int _minDisparity=0, int _numDisparities=0, int _SADWindowSize=0,
int _P1=0, int _P2=0, int _disp12MaxDiff=0, int _preFilterCap=0,
int _uniquenessRatio=0, int _speckleWindowSize=0, int _speckleRange=0,
bool _fullDP=false ) ;
// myStereoSGBM();
virtual void operator()(cv::InputArray _left, InputArray _right, OutputArray _disp ) ;
void GenerateFalseMap(cv::Mat &src, cv::Mat &disp);
~myStereoSGBM() ;
enum{DISP_SHIFT=4,DISP_SCALE=(1<<DISP_SHIFT)};
int minDisparity;
int numberOfDisparities;
int SADWindowSize;
int P1; int P2;
int disp12MaxDiff;
int preFilterCap;
int uniquenessRatio;
int speckleWindowSize;
int speckleRange;
bool fullDP ;
protected :
Mat buffer;
};
void filterSpeckles( InputOutputArray _img, double _newval, int maxSpeckleSize, double _maxDiff, InputOutputArray __buf ) ;
void validateDisparity( InputOutputArray _disp, InputArray _cost, int minDisparity, int numberOfDisparities, int disp12MaxDiff ) ;
CvRect cvGetValidDisparityROI( CvRect roi1, CvRect roi2, int minDisparity, int numberOfDisparities, int SADWindowSize ) ;
//void cvValidateDisparity( CvArr* _disp, const CvArr* _cost, int minDisparity, int numberOfDisparities, int disp12MaxDiff ) ;
}
stereosgbm.cpp
<pre name="code" class="html">
/*M/////////////////////////////////////////////////////////////////////////////////
//////
//
// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
// By downloading, copying, installing or using the software you agree to this
license.
// If you do not agree to this license, do not download, install,
// copy or use the software.
//
//
// License Agreement
// For Open Source Computer Vision Library
//
// Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
// Copyright (C) 2009, Willow Garage Inc., all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistribution's of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistribution's in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * The name of the copyright holders may not be used to endorse or promote
products
// derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are
disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/
/*
This is a variation of
"Stereo Processing by Semiglobal Matching and Mutual Information"
by Heiko Hirschmuller.
We match blocks rather than individual pixels, thus the algorithm is called
SGBM (Semi-global block matching)
*/
//#include "precomp.hpp"
#include <limits.h>
#include"sgbm.h"
#include<fstream>
namespace cv
{
typedef unsigned char PixType;
typedef short CostType;
typedef short DispType;
enum { NR = 16 , NR2 = NR/2 }; //NR=16
//myStereoSGBM::myStereoSGBM()
//{
//minDisparity = numberOfDisparities = 0;
//SADWindowSize = 0;
//P1 = P2 = 0;
//disp12MaxDiff = 0;
//preFilterCap = 0;
//uniquenessRatio = 0;
//speckleWindowSize = 0;
//speckleRange = 0;
//fullDP = false;
//}
myStereoSGBM::myStereoSGBM( int _minDisparity, int _numDisparities, int _SADWindowSize, int _P1, int _P2, int _disp12MaxDiff,
int _preFilterCap, int _uniquenessRatio, int _speckleWindowSize, int _speckleRange, bool _fullDP )
{
minDisparity = _minDisparity;
numberOfDisparities = _numDisparities;
SADWindowSize = _SADWindowSize;
P1 = _P1;
P2 = _P2;
disp12MaxDiff = _disp12MaxDiff;
preFilterCap = _preFilterCap;
uniquenessRatio = _uniquenessRatio;
speckleWindowSize = _speckleWindowSize;
speckleRange = _speckleRange;
fullDP = _fullDP;
}
myStereoSGBM::~myStereoSGBM()
{
}
/*
For each pixel row1[x], max(-maxD, 0) <= minX <= x < maxX <= width - max(0, -minD),
and for each disparity minD<=d<maxD the function
computes the cost (cost[(x-minX)*(maxD - minD) + (d - minD)]), depending on the
difference between row1[x] and row2[x-d]. The subpixel algorithm from
"Depth Discontinuities by Pixel-to-Pixel Stereo" by Stan Birchfield and C. Tomasi //亚像素插值
is used, hence the suffix BT.
the temporary buffer should contain width2*2 elements
*/
static void calcPixelCostBT( const Mat& img1, const Mat& img2, int y, int minD, int maxD, CostType* cost,
PixType* buffer, const PixType* tab, int tabOfs, int )
{
int x, c, width = img1.cols, cn = img1.channels();
int minX1 = max(-maxD, 0), maxX1 = width + min(minD, 0);
int minX2 = max(minX1 - maxD, 0), maxX2 = min(maxX1 - minD, width);
int D = maxD - minD, width1 = maxX1 - minX1, width2 = maxX2 - minX2;
const PixType *row1 = img1.ptr<PixType>(y), *row2 = img2.ptr<PixType>(y);
PixType *prow1 = buffer + width2*2, *prow2 = prow1 + width*cn*2;
tab += tabOfs;
for( c = 0; c < cn*2; c++ )
{
prow1[width*c] = prow1[width*c + width-1] = prow2[width*c] = prow2[width*c + width-1] = tab[0];
}
int n1 = y > 0 ? -(int)img1.step : 0, s1 = y < img1.rows-1 ? (int)img1.step : 0;
int n2 = y > 0 ? -(int)img2.step : 0, s2 = y < img2.rows-1 ? (int)img2.step : 0;
if( cn == 1 )
{
for( x = 1; x < width-1; x++ )
{
prow1[x] = tab[(row1[x+1] - row1[x-1])*2 + row1[x+n1+1] - row1[x+n1-1] + row1[x+s1+1] - row1[x+s1-1]];
prow2[width-1-x] = tab[(row2[x+1] - row2[x-1])*2 + row2[x+n2+1] - row2[x+n2-1] + row2[x+s2+1] - row2[x+s2-1]];
prow1[x+width] = row1[x];
prow2[width-1-x+width] = row2[x];
}
}
else
{
for( x = 1; x < width-1; x++ )
{
prow1[x] = tab[(row1[x*3+3] - row1[x*3-3])*2 + row1[x*3+n1+3] - row1[x*3+n1-3] + row1[x*3+s1+3] - row1[x*3+s1-3]];
prow1[x+width] = tab[(row1[x*3+4] - row1[x*3-2])*2 + row1[x*3+n1+4] - row1[x*3+n1-2] + row1[x*3+s1+4] - row1[x*3+s1-2]];
prow1[x+width*2] = tab[(row1[x*3+5] - row1[x*3-1])*2 + row1[x*3+n1+5] - row1[x*3+n1-1] + row1[x*3+s1+5] - row1[x*3+s1-1]];
prow2[width-1-x] = tab[(row2[x*3+3] - row2[x*3-3])*2 + row2[x*3+n2+3] - row2[x*3+n2-3] + row2[x*3+s2+3] - row2[x*3+s2-3]];
prow2[width-1-x+width] = tab[(row2[x*3+4] - row2[x*3-2])*2 + row2[x*3+n2+4] - row2[x*3+n2-2] + row2[x*3+s2+4] - row2[x*3+s2-2]];
prow2[width-1-x+width*2] = tab[(row2[x*3+5] - row2[x*3-1])*2 + row2[x*3+n2+5] - row2[x*3+n2-1] + row2[x*3+s2+5] - row2[x*3+s2-1]];
prow1[x+width*3] = row1[x*3];
prow1[x+width*4] = row1[x*3+1];
prow1[x+width*5] = row1[x*3+2];
prow2[width-1-x+width*3] = row2[x*3];
prow2[width-1-x+width*4] = row2[x*3+1];
prow2[width-1-x+width*5] = row2[x*3+2];
}
}
memset( cost, 0, width1*D*sizeof(cost[0]) );
buffer -= minX2;
cost -= minX1*D + minD; // simplify the cost indices inside the loop
/*#if CV_SSE2
volatile bool useSIMD = checkHardwareSupport(CV_CPU_SSE2);
#endif*/
#if 1
for( c = 0; c < cn*2; c++, prow1 += width, prow2 += width )
{
int diff_scale = c < cn ? 0 : 2; //对预处理之后的图像和原图像生成的代价加权相加 C=Cpreprocess+1/4*C原图
// precompute
// v0 = min(row2[x-1/2], row2[x], row2[x+1/2]) and
// v1 = max(row2[x-1/2], row2[x], row2[x+1/2]) and
for( x = minX2; x < maxX2; x++ )
{
int v = prow2[x];
int vl = x > 0 ? (v + prow2[x-1])/2 : v;
int vr = x < width-1 ? (v + prow2[x+1])/2 : v;
int v0 = min(vl, vr); v0 = min(v0, v);
int v1 = max(vl, vr); v1 = max(v1, v);
buffer[x] = (PixType)v0;
buffer[x + width2] = (PixType)v1;
}
for( x = minX1; x < maxX1; x++ )
{
int u = prow1[x];
int ul = x > 0 ? (u + prow1[x-1])/2 : u;
int ur = x < width-1 ? (u + prow1[x+1])/2 : u;
int u0 = min(ul, ur); u0 = min(u0, u);
int u1 = max(ul, ur); u1 = max(u1, u);
//#if CV_SSE2
//if( useSIMD )
//{
//__m128i _u = _mm_set1_epi8((char)u), _u0 = _mm_set1_epi8((char)u0);
//__m128i _u1 = _mm_set1_epi8((char)u1), z = _mm_setzero_si128();
//__m128i ds = _mm_cvtsi32_si128(diff_scale);
//for( int d = minD; d < maxD; d += 16 )
//{
//__m128i _v = _mm_loadu_si128((const __m128i*)(prow2 + width-x-1 + d));
//__m128i _v0 = _mm_loadu_si128((const __m128i*)(buffer + width-x-1 + d));
//__m128i _v1 = _mm_loadu_si128((const __m128i*)(buffer + width-x-1 + d + width2));
//__m128i c0 = _mm_max_epu8(_mm_subs_epu8(_u, _v1), _mm_subs_epu8(_v0, _u));
//__m128i c1 = _mm_max_epu8(_mm_subs_epu8(_v, _u1), _mm_subs_epu8(_u0, _v));
//__m128i diff = _mm_min_epu8(c0, c1);
//c0 = _mm_load_si128((__m128i*)(cost + x*D + d));
//c1 = _mm_load_si128((__m128i*)(cost + x*D + d + 8));
//_mm_store_si128((__m128i*)(cost + x*D + d), _mm_adds_epi16(c0, _mm_srl_epi16
//
//(_mm_unpacklo_epi8(diff,z), ds)));
//_mm_store_si128((__m128i*)(cost + x*D + d + 8), _mm_adds_epi16(c1, _mm_srl_epi16
//
//(_mm_unpackhi_epi8(diff,z), ds)));
//}
//}
//else
//#endif
{
for( int d = minD; d < maxD; d++ )
{
int v = prow2[width-x-1 + d];
int v0 = buffer[width-x-1 + d];
int v1 = buffer[width-x-1 + d + width2];
int c0 = max(0, u - v1); c0 = max(c0, v0 - u);
int c1 = max(0, v - u1); c1 = max(c1, u0 - v);
//cout<<cost[x*D + d]<<endl;
cost[x*D + d] = (CostType)(cost[x*D+d] + (min(c0, c1) >> diff_scale)); //代价由预处理后的图像和原图两部分共同组成
//if(c==0) continue;
//else
//cost[x*D + d] = (CostType)( (min(c0, c1) >> diff_scale));
// cout<<" +="<<cost[x*D + d]<<endl;
}
}
}
}
#else
for( c = 0; c < cn*2; c++, prow1 += width, prow2 += width )
{
for( x = minX1; x < maxX1; x++ )
{
int u = prow1[x];
#if CV_SSE2
if( useSIMD )
{
__m128i _u = _mm_set1_epi8(u), z = _mm_setzero_si128();
for( int d = minD; d < maxD; d += 16 )
{
__m128i _v = _mm_loadu_si128((const __m128i*)(prow2 + width-1-x + d));
__m128i diff = _mm_adds_epu8(_mm_subs_epu8(_u,_v), _mm_subs_epu8(_v,_u));
__m128i c0 = _mm_load_si128((__m128i*)(cost + x*D + d));
__m128i c1 = _mm_load_si128((__m128i*)(cost + x*D + d + 8));
_mm_store_si128((__m128i*)(cost + x*D + d), _mm_adds_epi16(c0, _mm_unpacklo_epi8
(diff,z)));
_mm_store_si128((__m128i*)(cost + x*D + d + 8), _mm_adds_epi16(c1,
_mm_unpackhi_epi8(diff,z)));
}
}
else
#endif
{
for( int d = minD; d < maxD; d++ )
{
int v = prow2[width-1-x + d];
cost[x*D + d] = (CostType)(cost[x*D + d] + (CostType)std::abs(u - v));
}
}
}
}
#endif
}
/*
computes disparity for "roi" in img1 w.r.t. img2 and write it to disp1buf.
that is, disp1buf(x, y)=d means that img1(x+roi.x, y+roi.y) ~ img2(x+roi.x-d, y+roi.y).
minD <= d < maxD.
disp2full is the reverse disparity map, that is:
disp2full(x+roi.x,y+roi.y)=d means that img2(x+roi.x, y+roi.y) ~ img1(x+roi.x+d, y+roi.y)
note that disp1buf will have the same size as the roi and
disp2full will have the same size as img1 (or img2).
On exit disp2buf is not the final disparity, it is an intermediate result that
becomes
final after all the tiles are processed.
the disparity in disp1buf is written with sub-pixel accuracy
(4 fractional bits, see CvmyStereoSGBM::DISP_SCALE),
using quadratic interpolation, while the disparity in disp2buf
is written as is, without interpolation.
disp2cost also has the same size as img1 (or img2).
It contains the minimum current cost, used to find the best disparity, corresponding
to the minimal cost.
*/
static void computeDisparitySGBM( const Mat& img1, const Mat& img2, Mat& disp1, const myStereoSGBM& params, Mat& buffer )
{
//#if CV_SSE2/*
// static const uchar LSBTab[] =
// {
// 0, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 6, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 7, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 6, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0,
// 5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0,
//
// 2, 0, 1, 0
// };
// volatile bool useSIMD = checkHardwareSupport(CV_CPU_SSE2); */
//#endif
const int ALIGN = 16;
const int DISP_SHIFT = myStereoSGBM::DISP_SHIFT;
const int DISP_SCALE = myStereoSGBM::DISP_SCALE;
const CostType MAX_COST = SHRT_MAX;
int minD = params.minDisparity, maxD = minD + params.numberOfDisparities;
Size SADWindowSize; //5,5
SADWindowSize.width = SADWindowSize.height = params.SADWindowSize > 0 ? params.SADWindowSize : 5;
int ftzero = max(params.preFilterCap, 15) | 1; //63 最小为15
int uniquenessRatio = params.uniquenessRatio >= 0 ? params.uniquenessRatio : 10;
int disp12MaxDiff = params.disp12MaxDiff > 0 ? params.disp12MaxDiff : 1;
int P1 = params.P1 > 0 ? params.P1 : 2, P2 = max(params.P2 > 0 ? params.P2 : 5, P1+1);
int k, width = disp1.cols, height = disp1.rows;
int minX1 = max(-maxD, 0), maxX1 = width + min(minD, 0); //minX1=0,maxX1=width
int D = maxD - minD, width1 = maxX1 - minX1; //D=DMax=64，width1=width
int INVALID_DISP = minD - 1, INVALID_DISP_SCALED = INVALID_DISP*DISP_SCALE; //INVALID_DISP=-1,INVALID_DISP_SCALED=-16
int SW2 = SADWindowSize.width/2, SH2 = SADWindowSize.height/2;
int npasses = params.fullDP ? 2 : 1; //
const int TAB_OFS = 256*4, TAB_SIZE = 256 + TAB_OFS*2;
PixType clipTab[TAB_SIZE];
for( k = 0; k < TAB_SIZE; k++ )
{
clipTab[k] = (PixType)(min(max(k - TAB_OFS, -ftzero), ftzero) + ftzero);
//cout<<"clipTab["<<k<<"] :"<<(int )clipTab[k]<<endl;
}
if( minX1 >= maxX1 )
{
disp1 = Scalar::all(INVALID_DISP_SCALED);
return;
}
CV_Assert( D % 16 == 0 );
// NR - the number of directions. the loop on x below that computes Lr assumes that NR == 8.
// if you change NR, please, modify the loop as well.
int D2 = D+16, NRD2 = NR2*D2;
// the number of L_r(.,.) and min_k L_r(.,.) lines in the buffer:
// for 8-way dynamic programming we need the current row and
// the previous row, i.e. 2 rows in total
const int NLR = 2;
const int LrBorder = NLR - 1;
// for each possible stereo match (img1(x,y) <=> img2(x-d,y))
// we keep pixel difference cost (C) and the summary cost over NR directions (S).
// we also keep all the partial costs for the previous line L_r(x,d) and also min_k L_r(x, k)
size_t costBufSize = width1*D;
size_t CSBufSize = costBufSize*(params.fullDP ? height : 1);
size_t minLrSize = (width1 + LrBorder*2)*NR2, LrSize = minLrSize*D2;
int hsumBufNRows = SH2*2 + 2;
size_t totalBufSize = (LrSize + minLrSize)*NLR*sizeof(CostType) + // minLr[] and Lr[]
costBufSize*(hsumBufNRows + 1)*sizeof(CostType) + // hsumBuf, pixdiff
CSBufSize*2*sizeof(CostType) + // C, S
width*16*img1.channels()*sizeof(PixType) + // temp buffer for computing per-pixel cost //
width*(sizeof(CostType) + sizeof(DispType)) + 1024; // disp2cost + disp2
if( !buffer.data || !buffer.isContinuous() || buffer.cols*buffer.rows*buffer.elemSize() < totalBufSize )
buffer.create(1, (int)totalBufSize, CV_8U);
// summary cost over different (nDirs) directions
CostType* Cbuf = (CostType*)alignPtr(buffer.data, ALIGN);
CostType* Sbuf = Cbuf + CSBufSize;
CostType* hsumBuf = Sbuf + CSBufSize;
CostType* pixDiff = hsumBuf + costBufSize*hsumBufNRows;
CostType* disp2cost = pixDiff + costBufSize + (LrSize + minLrSize)*NLR;
DispType* disp2ptr = (DispType*)(disp2cost + width);
PixType* tempBuf = (PixType*)(disp2ptr + width);
// add P2 to every C(x,y). it saves a few operations in the inner loops
for( k = 0; k < width1*D; k++ )
Cbuf[k] = (CostType)P2; //立方体的一层大小
for( int pass = 1; pass <= npasses; pass++ ) //npasses=1
{
int x1, y1, x2, y2, dx, dy;
if( pass == 1 )
{
y1 = 0; y2 = height; dy = 1;
x1 = 0; x2 = width1; dx = 1;
}
else
{
y1 = height-1; y2 = -1; dy = -1;
x1 = width1-1; x2 = -1; dx = -1;
}
CostType *Lr[NLR]={0}, *minLr[NLR]={0};
for( k = 0; k < NLR; k++ )
{
// shift Lr[k] and minLr[k] pointers, because we allocated them with the borders,
// and will occasionally use negative indices with the arrays
// we need to shift Lr[k] pointers by 1, to give the space for d=-1.
// however, then the alignment will be imperfect, i.e. bad for SSE,
// thus we shift the pointers by 8 (8*sizeof(short) == 16 - ideal alignment)
Lr[k] = pixDiff + costBufSize + LrSize*k + NRD2*LrBorder + 8; // Lr[0] NR2向动态规划数据存储
//Lr[1]
memset( Lr[k] - LrBorder*NRD2 - 8, 0, LrSize*sizeof(CostType) );
minLr[k] = pixDiff + costBufSize + LrSize*NLR + minLrSize*k + NR2*LrBorder; //每行像素点最小代价 缓存
memset( minLr[k] - LrBorder*NR2, 0, minLrSize*sizeof(CostType) );
}
for( int y = y1; y != y2; y += dy )
{
int x, d;
DispType* disp1ptr = disp1.ptr<DispType>(y);
CostType* C = Cbuf + (!params.fullDP ? 0 : y*costBufSize);
//for(int i=0;i<width*D;i++)
// cout<<C[i]<<endl;
CostType* S = Sbuf + (!params.fullDP ? 0 : y*costBufSize);
if( pass == 1 ) // compute C on the first pass, and reuse it on the second pass, if any.
{
int dy1 = y == 0 ? 0 : y + SH2, dy2 = y == 0 ? SH2 : dy1;
for( k = dy1; k <= dy2; k++ )
{
CostType* hsumAdd = hsumBuf + (min(k, height-1) % hsumBufNRows)*costBufSize; // costBufSize* 4 hsumBufNRows=4
if( k < height )
{
calcPixelCostBT( img1, img2, k, minD, maxD, pixDiff, tempBuf, clipTab, TAB_OFS, ftzero );
memset(hsumAdd, 0, D*sizeof(CostType));
for( x = 0; x <= SW2*D; x += D )
{
int scale = x == 0 ? SW2 + 1 : 1;
for( d = 0; d < D; d++ )
hsumAdd[d] = (CostType)(hsumAdd[d] + pixDiff[x + d]*scale);
}
if( y > 0 )
{
const CostType* hsumSub = hsumBuf + (max(y - SH2 - 1, 0) % hsumBufNRows)*costBufSize;
const CostType* Cprev = !params.fullDP || y == 0 ? C : C - costBufSize;
for( x = D; x < width1*D; x += D )
{
const CostType* pixAdd = pixDiff + min(x + SW2*D, (width1-1)*D);
const CostType* pixSub = pixDiff + max(x - (SW2+1)*D, 0);
//#if CV_SSE2/*
//if( useSIMD )
//{
// for( d = 0; d < D; d += 8 )
// {
// __m128i hv = _mm_load_si128((const __m128i*)(hsumAdd + x - D + d));
// __m128i Cx = _mm_load_si128((__m128i*)(Cprev + x + d));
// hv = _mm_adds_epi16(_mm_subs_epi16(hv,
// _mm_load_si128((const __m128i*)(pixSub + d))),
// _mm_load_si128((const __m128i*)(pixAdd + d)));
// Cx = _mm_adds_epi16(_mm_subs_epi16(Cx,
// _mm_load_si128((const __m128i*)(hsumSub + x + d))),
// hv);
// _mm_store_si128((__m128i*)(hsumAdd + x + d), hv);
// _mm_store_si128((__m128i*)(C + x + d), Cx);
// }
//}
//else */
//#endif
{
for( d = 0; d < D; d++ )
{
int hv = hsumAdd[x + d] = (CostType)(hsumAdd[x - D + d] + pixAdd[d] - pixSub[d]);
C[x + d] = (CostType)(Cprev[x + d] + hv - hsumSub[x + d]);
}
}
}
}
else
{
for( x = D; x < width1*D; x += D )
{
const CostType* pixAdd = pixDiff + min(x + SW2*D, (width1-1)*D);
const CostType* pixSub = pixDiff + max(x - (SW2+1)*D, 0);
for( d = 0; d < D; d++ )
hsumAdd[x + d] = (CostType)(hsumAdd[x - D + d] + pixAdd[d] - pixSub[d]);
}
}
}
if( y == 0 )
{
int scale = k == 0 ? SH2 + 1 : 1;
for( x = 0; x < width1*D; x++ )
C[x] = (CostType)(C[x] + hsumAdd[x]*scale);
}
}
// also, clear the S buffer
for( k = 0; k < width1*D; k++ )
{
S[k] = 0;
}
}
if(y==11)
{
ofstream cost0("D:\cpp_project\test\opencv_stereo\opencv_stereo\cost0.txt");
for(int i=0;i<width*D;i++)
cost0<<"C["<<i<<"]: "<<C[i]<<endl;
cost0.close();
}
// clear the left and the right borders
memset( Lr[0] - NRD2*LrBorder - 8, 0, NRD2*LrBorder*sizeof(CostType) );
memset( Lr[0] + width1*NRD2 - 8, 0, NRD2*LrBorder*sizeof(CostType) ); // NRD2 = 8*D2;
memset( minLr[0] - NR2*LrBorder, 0, NR2*LrBorder*sizeof(CostType) );
memset( minLr[0] + width1*NR2, 0, NR2*LrBorder*sizeof(CostType) );
/*
[formula 13 in the paper]
compute L_r(p, d) = C(p, d) +
min(L_r(p-r, d),
L_r(p-r, d-1) + P1,
L_r(p-r, d+1) + P1,
min_k L_r(p-r, k) + P2) - min_k L_r(p-r, k)
where p = (x,y), r is one of the directions.
we process all the directions at once:
0: r=(-dx, 0)
1: r=(-1, -dy)
2: r=(0, -dy)
3: r=(1, -dy)
4: r=(-2, -dy)
5: r=(-1, -dy*2)
6: r=(1, -dy*2)
7: r=(2, -dy)
*/
for( x = x1; x != x2; x += dx )
{
int xm = x*NR2, xd = xm*D2;
int delta0 = minLr[0][xm - dx*NR2] + P2, delta1 = minLr[1][xm - NR2 + 1] + P2;
int delta2 = minLr[1][xm + 2] + P2, delta3 = minLr[1][xm + NR2 + 3] + P2;
CostType* Lr_p0 = Lr[0] + xd - dx*NRD2;
CostType* Lr_p1 = Lr[1] + xd - NRD2 + D2;
CostType* Lr_p2 = Lr[1] + xd + D2*2;
CostType* Lr_p3 = Lr[1] + xd + NRD2 + D2*3;
Lr_p0[-1] = Lr_p0[D] = Lr_p1[-1] = Lr_p1[D] =
Lr_p2[-1] = Lr_p2[D] = Lr_p3[-1] = Lr_p3[D] = MAX_COST;
CostType* Lr_p = Lr[0] + xd;
const CostType* Cp = C + x*D;
CostType* Sp = S + x*D;
//#if CV_SSE2/*
//if( useSIMD )
//{
// __m128i _P1 = _mm_set1_epi16((short)P1);
// __m128i _delta0 = _mm_set1_epi16((short)delta0);
// __m128i _delta1 = _mm_set1_epi16((short)delta1);
// __m128i _delta2 = _mm_set1_epi16((short)delta2);
// __m128i _delta3 = _mm_set1_epi16((short)delta3);
// __m128i _minL0 = _mm_set1_epi16((short)MAX_COST);
//for( d = 0; d < D; d += 8 )
//{
//__m128i Cpd = _mm_load_si128((const __m128i*)(Cp + d));
//__m128i L0, L1, L2, L3;
//L0 = _mm_load_si128((const __m128i*)(Lr_p0 + d));
//L1 = _mm_load_si128((const __m128i*)(Lr_p1 + d));
//L2 = _mm_load_si128((const __m128i*)(Lr_p2 + d));
//L3 = _mm_load_si128((const __m128i*)(Lr_p3 + d));
//L0 = _mm_min_epi16(L0, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p0 + d -
//1)), _P1));
//L0 = _mm_min_epi16(L0, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p0 + d +
//1)), _P1));
//L1 = _mm_min_epi16(L1, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p1 + d -
//1)), _P1));
//L1 = _mm_min_epi16(L1, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p1 + d +
//1)), _P1));
//L2 = _mm_min_epi16(L2, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p2 + d -
//1)), _P1));
//L2 = _mm_min_epi16(L2, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p2 + d +
//1)), _P1));
//L3 = _mm_min_epi16(L3, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p3 + d -
//1)), _P1));
//L3 = _mm_min_epi16(L3, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p3 + d +
//1)), _P1));
//L0 = _mm_min_epi16(L0, _delta0);
//L0 = _mm_adds_epi16(_mm_subs_epi16(L0, _delta0), Cpd);
//L1 = _mm_min_epi16(L1, _delta1);
//L1 = _mm_adds_epi16(_mm_subs_epi16(L1, _delta1), Cpd);
//L2 = _mm_min_epi16(L2, _delta2);
//L2 = _mm_adds_epi16(_mm_subs_epi16(L2, _delta2), Cpd);
//L3 = _mm_min_epi16(L3, _delta3);
//L3 = _mm_adds_epi16(_mm_subs_epi16(L3, _delta3), Cpd);
//_mm_store_si128( (__m128i*)(Lr_p + d), L0);
//_mm_store_si128( (__m128i*)(Lr_p + d + D2), L1);
//_mm_store_si128( (__m128i*)(Lr_p + d + D2*2), L2);
//_mm_store_si128( (__m128i*)(Lr_p + d + D2*3), L3);
//__m128i t0 = _mm_min_epi16(_mm_unpacklo_epi16(L0, L2), _mm_unpackhi_epi16(L0, L2));
//__m128i t1 = _mm_min_epi16(_mm_unpacklo_epi16(L1, L3), _mm_unpackhi_epi16(L1, L3));
//t0 = _mm_min_epi16(_mm_unpacklo_epi16(t0, t1), _mm_unpackhi_epi16(t0, t1));
//_minL0 = _mm_min_epi16(_minL0, t0);
//__m128i Sval = _mm_load_si128((const __m128i*)(Sp + d));
//L0 = _mm_adds_epi16(L0, L1);
//L2 = _mm_adds_epi16(L2, L3);
//Sval = _mm_adds_epi16(Sval, L0);
//Sval = _mm_adds_epi16(Sval, L2);
//_mm_store_si128((__m128i*)(Sp + d), Sval);
//}
//_minL0 = _mm_min_epi16(_minL0, _mm_srli_si128(_minL0, 8));
//_mm_storel_epi64((__m128i*)&minLr[0][xm], _minL0);
//}
//else */
//#endif
{
int minL0 = MAX_COST, minL1 = MAX_COST, minL2 = MAX_COST, minL3 = MAX_COST;
for( d = 0; d < D; d++ )
{
int Cpd = Cp[d], L0, L1, L2, L3;
L0 = Cpd + min((int)Lr_p0[d], min(Lr_p0[d-1] + P1, min(Lr_p0[d+1] + P1, delta0))) - delta0;
L1 = Cpd + min((int)Lr_p1[d], min(Lr_p1[d-1] + P1, min(Lr_p1[d+1] + P1, delta1))) - delta1;
L2 = Cpd + min((int)Lr_p2[d], min(Lr_p2[d-1] + P1, min(Lr_p2[d+1] + P1, delta2))) - delta2;
L3 = Cpd + min((int)Lr_p3[d], min(Lr_p3[d-1] + P1, min(Lr_p3[d+1] + P1, delta3))) - delta3;
Lr_p[d] = (CostType)L0; minL0 = min(minL0, L0);
Lr_p[d + D2] = (CostType)L1; minL1 = min(minL1, L1);
Lr_p[d + D2*2] = (CostType)L2; minL2 = min(minL2, L2);
Lr_p[d + D2*3] = (CostType)L3; minL3 = min(minL3, L3);
Sp[d] = saturate_cast<CostType>(Sp[d] + L0 + L1 + L2 + L3); //原来
//Sp[d] = saturate_cast<CostType>( L0 + L1 + L2 + L3);
}
minLr[0][xm] = (CostType)minL0;
minLr[0][xm+1] = (CostType)minL1;
minLr[0][xm+2] = (CostType)minL2;
minLr[0][xm+3] = (CostType)minL3;
}
}
///////////////////////////////////////////////
//////////////////////////////////////
if( pass == npasses )
{
for( x = 0; x < width; x++ )
{
disp1ptr[x] = disp2ptr[x] = (DispType)INVALID_DISP_SCALED;
disp2cost[x] = MAX_COST;
}
for( x = width1 - 1; x >= 0; x-- )
///////////////////////////////////////////////////////////////
//for( x = 0; x <=width-1; x++ )
{
CostType* Sp = S + x*D;
int minS = MAX_COST, bestDisp = -1;
if( npasses == 1 ) //
{
int xm = x*NR2, xd = xm*D2;
int minL0 = MAX_COST;
int delta0 = minLr[0][xm + NR2] + P2;
CostType* Lr_p0 = Lr[0] + xd + NRD2;
Lr_p0[-1] = Lr_p0[D] = MAX_COST;
CostType* Lr_p = Lr[0] + xd;
const CostType* Cp = C + x*D;
//#if CV_SSE2/*
//if( useSIMD )
//{
//__m128i _P1 = _mm_set1_epi16((short)P1);
//__m128i _delta0 = _mm_set1_epi16((short)delta0);
//__m128i _minL0 = _mm_set1_epi16((short)minL0);
//__m128i _minS = _mm_set1_epi16(MAX_COST), _bestDisp = _mm_set1_epi16(-1);
//__m128i _d8 = _mm_setr_epi16(0, 1, 2, 3, 4, 5, 6, 7), _8 = _mm_set1_epi16(8);
//for( d = 0; d < D; d += 8 )
//{
//__m128i Cpd = _mm_load_si128((const __m128i*)(Cp + d)), L0;
//L0 = _mm_load_si128((const __m128i*)(Lr_p0 + d));
//L0 = _mm_min_epi16(L0, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p0 + d - 1)), _P1));
//L0 = _mm_min_epi16(L0, _mm_adds_epi16(_mm_loadu_si128((const __m128i*)(Lr_p0 + d + 1)), _P1));
//L0 = _mm_min_epi16(L0, _delta0);
//L0 = _mm_adds_epi16(_mm_subs_epi16(L0, _delta0), Cpd);
//_mm_store_si128((__m128i*)(Lr_p + d), L0);
//_minL0 = _mm_min_epi16(_minL0, L0);
//L0 = _mm_adds_epi16(L0, *(__m128i*)(Sp + d));
//_mm_store_si128((__m128i*)(Sp + d), L0);
//__m128i mask = _mm_cmpgt_epi16(_minS, L0);
//_minS = _mm_min_epi16(_minS, L0);
//_bestDisp = _mm_xor_si128(_bestDisp,
//_mm_and_si128(_mm_xor_si128(_bestDisp,_d8), mask));
//_d8 = _mm_adds_epi16(_d8, _8);
//}
//short CV_DECL_ALIGNED(16) bestDispBuf[8];
//_mm_store_si128((__m128i*)bestDispBuf, _bestDisp);
//_minL0 = _mm_min_epi16(_minL0, _mm_srli_si128(_minL0, 8));
//_minL0 = _mm_min_epi16(_minL0, _mm_srli_si128(_minL0, 4));
//_minL0 = _mm_min_epi16(_minL0, _mm_srli_si128(_minL0, 2));
//__m128i qS = _mm_min_epi16(_minS, _mm_srli_si128(_minS, 8));
//qS = _mm_min_epi16(qS, _mm_srli_si128(qS, 4));
//qS = _mm_min_epi16(qS, _mm_srli_si128(qS, 2));
//minLr[0][xm] = (CostType)_mm_cvtsi128_si32(_minL0);
//minS = (CostType)_mm_cvtsi128_si32(qS);
//qS = _mm_shuffle_epi32(_mm_unpacklo_epi16(qS, qS), 0);
//qS = _mm_cmpeq_epi16(_minS, qS);
//int idx = _mm_movemask_epi8(_mm_packs_epi16(qS, qS)) & 255;
//bestDisp = bestDispBuf[LSBTab[idx]];
//}
//else */
//#endif
{
for( d = 0; d < D; d++ )
{
int L0 = Cp[d] + min((int)Lr_p0[d], min(Lr_p0[d-1] + P1, min(Lr_p0[d+1] + P1, delta0))) - delta0;
Lr_p[d] = (CostType)L0;
minL0 = min(minL0, L0);
int Sval = Sp[d] = saturate_cast<CostType>(Sp[d] + L0);
if( Sval < minS )
{
minS = Sval;
bestDisp = d;
}
}
minLr[0][xm] = (CostType)minL0;
}
}
else
{
for( d = 0; d < D; d++ )
{
int Sval = Sp[d];
if( Sval < minS )
{
minS = Sval;
bestDisp = d;
}
}
}
for( d = 0; d < D; d++ )
{
if( Sp[d]*(100 - uniquenessRatio) < minS*100 && std::abs(bestDisp - d) > 1 )
break;
}
if( d < D )
continue;
d = bestDisp;
int _x2 = x + minX1 - d - minD;
if( disp2cost[_x2] > minS )
{
disp2cost[_x2] = (CostType)minS;
disp2ptr[_x2] = (DispType)(d + minD);
}
if( 0 < d && d < D-1 ) //亚像素插值
{
// do subpixel quadratic interpolation:
// fit parabola into (x1=d-1, y1=Sp[d-1]), (x2=d, y2=Sp[d]), (x3=d+1, y3=Sp[d+1])
// then find minimum of the parabola.
int denom2 = max(Sp[d-1] + Sp[d+1] - 2*Sp[d], 1);
d = d*DISP_SCALE + ((Sp[d-1] - Sp[d+1])*DISP_SCALE + denom2)/(denom2*2);
}
else
d *= DISP_SCALE;
disp1ptr[x + minX1] = (DispType)(d + minD*DISP_SCALE);
// cout<<(float)disp1ptr[x + minX1]/16<<endl;
}
//LRcheck
for( x = minX1; x < maxX1; x++ )
{
// we round the computed disparity both towards -inf and +inf and check
// if either of the corresponding disparities in disp2 is consistent.
// This is to give the computed disparity a chance to look valid if it is.
int d1 = disp1ptr[x];
if( d1 == INVALID_DISP_SCALED )
continue;
int _d = d1 >> DISP_SHIFT;
int d_ = (d1 + DISP_SCALE-1) >> DISP_SHIFT;
int _x = x - _d, x_ = x - d_;
if( 0 <= _x && _x < width && disp2ptr[_x] >= minD && std::abs(disp2ptr[_x] - _d) > disp12MaxDiff&& 0 <= x_ && x_ < width && disp2ptr[x_] >= minD && std::abs(disp2ptr[x_] - d_) > disp12MaxDiff )
disp1ptr[x] = (DispType)INVALID_DISP_SCALED;
}
}
// now shift the cyclic buffers
std::swap( Lr[0], Lr[1] );
std::swap( minLr[0], minLr[1] );
}
}
}
typedef cv::Point_<short> Point2s;
void myStereoSGBM::operator() ( InputArray _left, InputArray _right, OutputArray _disp )
{
Mat left = _left.getMat(), right = _right.getMat();
CV_Assert( left.size() == right.size() && left.type() == right.type() && left.depth() == DataType<PixType>::depth );
_disp.create( left.size(), CV_16S );
Mat disp = _disp.getMat();
computeDisparitySGBM( left, right, disp, *this, buffer );
medianBlur(disp, disp, 3);
if( speckleWindowSize > 0 )
cv::filterSpeckles(disp, (minDisparity - 1)*DISP_SCALE, speckleWindowSize, DISP_SCALE*speckleRange, buffer);//连通区域检测
}
Rect getValidDisparityROI( Rect roi1, Rect roi2, int minDisparity, int numberOfDisparities, int SADWindowSize )
{
int SW2 = SADWindowSize/2;
int minD = minDisparity, maxD = minDisparity + numberOfDisparities - 1;
int xmin = max(roi1.x, roi2.x + maxD) + SW2;
int xmax = min(roi1.x + roi1.width, roi2.x + roi2.width - minD) - SW2;
int ymin = max(roi1.y, roi2.y) + SW2;
int ymax = min(roi1.y + roi1.height, roi2.y + roi2.height) - SW2;
Rect r(xmin, ymin, xmax - xmin, ymax - ymin);
return r.width > 0 && r.height > 0 ? r : Rect();
}
}
namespace
{
template <typename T>
void filterSpecklesImpl(cv::Mat& img, int newVal, int maxSpeckleSize, int maxDiff, cv::Mat& _buf)
{
//filterSpecklesImpl<short>(img, newVal, maxSpeckleSize, maxDiff, _buf);
using namespace cv;
int width = img.cols, height = img.rows, npixels = width*height;
size_t bufSize = npixels*(int)(sizeof(cv::Point_<short>) + sizeof(int) + sizeof(uchar)); //存了三部分东西
if( !_buf.isContinuous() || !_buf.data || _buf.cols*_buf.rows*_buf.elemSize() < bufSize )
_buf.create(1, (int)bufSize, CV_8U);
uchar* buf = _buf.data;
int i, j, dstep = (int)(img.step/sizeof(T));
int* labels = (int*)buf;
buf += npixels*sizeof(labels[0]);
cv::Point_<short>* wbuf = (cv::Point_<short>*)buf;
buf += npixels*sizeof(wbuf[0]);
uchar* rtype = (uchar*)buf;
int curlabel = 0;
// clear out label assignments
memset(labels, 0, npixels*sizeof(labels[0]));
for( i = 0; i < height; i++ )
{
T* ds = img.ptr<T>(i);
int* ls = labels + width*i;
for( j = 0; j < width; j++ )
{
if( ds[j] != newVal ) // not a bad disparity
{
if( ls[j] ) // has a label, check for bad label
{
if( rtype[ls[j]] ) // small region, zero out disparity
ds[j] = (T)newVal;
}
// no label, assign and propagate
else
{
cv::Point_<short>* ws = wbuf; // initialize wavefront
cv::Point_<short> p((short)j, (short)i); // current pixel
curlabel++; // next label
int count = 0; // current region size
ls[j] = curlabel;
// wavefront propagation
while( ws >= wbuf ) // wavefront not empty
{
count++;
// put neighbors onto wavefront
T* dpp = &img.at<T>(p.y, p.x);
T dp = *dpp; //p(x,y)的像素值
int* lpp = labels + width*p.y + p.x;
if( p.y < height-1 && !lpp[+width] && dpp[+dstep] != newVal && std::abs(dp - dpp[+dstep]) <= maxDiff )
{
lpp[+width] = curlabel;
*ws++ = cv::Point_<short>(p.x, p.y+1);
}
if( p.y > 0 && !lpp[-width] && dpp[-dstep] != newVal && std::abs(dp - dpp[-dstep]) <= maxDiff )
{
lpp[-width] = curlabel;
*ws++ = cv::Point_<short>(p.x, p.y-1);
}
if( p.x < width-1 && !lpp[+1] && dpp[+1] != newVal && std::abs(dp - dpp[+1]) <= maxDiff )
{
lpp[+1] = curlabel;
*ws++ = cv::Point_<short>(p.x+1, p.y);
}
if( p.x > 0 && !lpp[-1] && dpp[-1] != newVal && std::abs(dp - dpp[-1]) <= maxDiff )
{
lpp[-1] = curlabel;
*ws++ = cv::Point_<short>(p.x-1, p.y);
}
// pop most recent and propagate
// NB: could try least recent, maybe better convergence
p = *--ws;
}
// assign label type
if( count <= maxSpeckleSize ) // speckle region
{
rtype[ls[j]] = 1; // small region label
ds[j] = (T)newVal;
}
else
rtype[ls[j]] = 0; // large region label
}
}
}
}
}
}
void cv::filterSpeckles( InputOutputArray _img, double _newval, int maxSpeckleSize, double _maxDiff, InputOutputArray __buf )
//cv::filterSpeckles(disp, (minDisparity - 1)*DISP_SCALE, speckleWindowSize, DISP_SCALE*speckleRange, buffer);
{
Mat img = _img.getMat();
Mat temp, &_buf = __buf.needed() ? __buf.getMatRef() : temp;
CV_Assert( img.type() == CV_8UC1 || img.type() == CV_16SC1 );
int newVal = cvRound(_newval);
int maxDiff = cvRound(_maxDiff);
if (img.type() == CV_8UC1)
filterSpecklesImpl<uchar>(img, newVal, maxSpeckleSize, maxDiff, _buf);
else
filterSpecklesImpl<short>(img, newVal, maxSpeckleSize, maxDiff, _buf);
}
void cv::validateDisparity( InputOutputArray _disp, InputArray _cost, int minDisparity, int numberOfDisparities, int disp12MaxDiff )
{
Mat disp = _disp.getMat(), cost = _cost.getMat();
int cols = disp.cols, rows = disp.rows;
int minD = minDisparity, maxD = minDisparity + numberOfDisparities;
int x, minX1 = max(maxD, 0), maxX1 = cols + min(minD, 0);
AutoBuffer<int> _disp2buf(cols*2);
int* disp2buf = _disp2buf;
int* disp2cost = disp2buf + cols;
const int DISP_SHIFT = 4, DISP_SCALE = 1 << DISP_SHIFT;
int INVALID_DISP = minD - 1, INVALID_DISP_SCALED = INVALID_DISP*DISP_SCALE;
int costType = cost.type();
disp12MaxDiff *= DISP_SCALE;
CV_Assert( numberOfDisparities > 0 && disp.type() == CV_16S && (costType == CV_16S || costType == CV_32S) && disp.size() == cost.size() );
for( int y = 0; y < rows; y++ )
{
short* dptr = disp.ptr<short>(y);
for( x = 0; x < cols; x++ )
{
disp2buf[x] = INVALID_DISP_SCALED;
disp2cost[x] = INT_MAX;
}
if( costType == CV_16S )
{
const short* cptr = cost.ptr<short>(y);
for( x = minX1; x < maxX1; x++ )
{
int d = dptr[x], c = cptr[x];
int x2 = x - ((d + DISP_SCALE/2) >> DISP_SHIFT);
if( disp2cost[x2] > c )
{
disp2cost[x2] = c;
disp2buf[x2] = d;
}
}
}
else
{
const int* cptr = cost.ptr<int>(y);
for( x = minX1; x < maxX1; x++ )
{
int d = dptr[x], c = cptr[x];
int x2 = x - ((d + DISP_SCALE/2) >> DISP_SHIFT);
if( disp2cost[x2] < c )
{
disp2cost[x2] = c;
disp2buf[x2] = d;
}
}
}
for( x = minX1; x < maxX1; x++ )
{
// we round the computed disparity both towards -inf and +inf and check
// if either of the corresponding disparities in disp2 is consistent.
// This is to give the computed disparity a chance to look valid if it is.
int d = dptr[x];
if( d == INVALID_DISP_SCALED )
continue;
int d0 = d >> DISP_SHIFT;
int d1 = (d + DISP_SCALE-1) >> DISP_SHIFT;
int x0 = x - d0, x1 = x - d1;
if( (0 <= x0 && x0 < cols && disp2buf[x0] > INVALID_DISP_SCALED && std::abs(disp2buf[x0] - d) > disp12MaxDiff) && (0 <= x1 && x1 < cols && disp2buf[x1] > INVALID_DISP_SCALED && std::abs(disp2buf[x1] - d) > disp12MaxDiff) )
dptr[x] = (short)INVALID_DISP_SCALED;
}
}
}
CvRect cvGetValidDisparityROI( CvRect roi1, CvRect roi2, int minDisparity, int numberOfDisparities, int SADWindowSize )
{
return (CvRect)cv::getValidDisparityROI( roi1, roi2, minDisparity,
numberOfDisparities, SADWindowSize );
}
void cvValidateDisparity( CvArr* _disp, const CvArr* _cost, int minDisparity, int numberOfDisparities, int disp12MaxDiff )
{
cv::Mat disp = cv::cvarrToMat(_disp), cost = cv::cvarrToMat(_cost);
cv::validateDisparity( disp, cost, minDisparity, numberOfDisparities, disp12MaxDiff
);
}
void myStereoSGBM::GenerateFalseMap(cv::Mat &src, cv::Mat &disp)
{
// color map
float max_val = 255.0f;
float map[8][4] = {{0,0,0,114},{0,0,1,185},{1,0,0,114},{1,0,1,174},
{0,1,0,114},{0,1,1,185},{1,1,0,114},{1,1,1,0}};
float sum = 0;
for (int i=0; i<8; i++)
sum += map[i][3];
float weights[8]; // relative weights
float cumsum[8]; // cumulative weights
cumsum[0] = 0;
for (int i=0; i<7; i++) {
weights[i] = sum/map[i][3];
cumsum[i+1] = cumsum[i] + map[i][3]/sum;
}
int height_ = src.rows;
int width_ = src.cols;
// for all pixels do
for (int v=0; v<height_; v++) {
for (int u=0; u<width_; u++) {
// get normalized value
float val = std::min(std::max(src.data[v*width_ + u]/max_val,0.0f),1.0f);
// find bin
int i;
for (i=0; i<7; i++)
if (val<cumsum[i+1])
break;
// compute red/green/blue values
float w = 1.0-(val-cumsum[i])*weights[i];
uchar r = (uchar)((w*map[i][0]+(1.0-w)*map[i+1][0]) * 255.0);
uchar g = (uchar)((w*map[i][1]+(1.0-w)*map[i+1][1]) * 255.0);
uchar b = (uchar)((w*map[i][2]+(1.0-w)*map[i+1][2]) * 255.0);
//rgb内存连续存放
disp.data[v*width_*3 + 3*u + 0] = b;
disp.data[v*width_*3 + 3*u + 1] = g;
disp.data[v*width_*3 + 3*u + 2] = r;
}
}
}