NO1的配置算完成了。接下来配置NOD2。
关闭NOD1电源，拷贝NOD1目录下的文件到NOD2
在VMWARE SERVER控制台按ctrl+o，打开NOD2下的Red Hat Enterprise Linux 4.vmx
右击setting，打开options,改成NOD2
确定，点击start this virtul machine
选择 create a new identifier
以root用户登录修改网卡配置
出现下面错误，原因是我在公司配置143这个IP已经被使用了，该个未使用的IP地址，待会再来修改NOD1的hosts。修改主机名魏NOD2
查看主机名，添加/etc/hosts
[root@NOD1 ~]# uname -n
NOD2
[root@NOD1 ~]# vim /etc/hosts
127.0.0.1 localhost
128.1.100.144 nod1
128.1.100.145 nod2
128.1.100.201 nod1-vip
128.1.100.202 nod2-vip
10.10.10.100 nod1-priv
10.10.10.101 nod2-priv
修改[root@NOD1 ~]# vim /home/oracle/.bash_profile
ORACLE_SID=ORCL2
增加ssh用户等效性，在集群就需服务CRS和RAC安装过程中，oui必须以ORACLE用户身份将软件复制到所有RAC节点，而不提示输入口令。在ORACLE 10G中可以用ssh来完成这项工作。
重启NOD2，开启NOD1电源，我还是现在NOD1上配置
NOD2在重启过程中启动了硬件勘察工具，原因是刚才网卡配置探测了新的MAC地址，旧的没有删掉，删除掉就行了。
登录NOD1，修改/etc/hosts文件
128.1.100.145 nod2
以ORACLE用户生成公钥和私钥
[root@NOD1 ~]# su - oracle
[oracle@NOD1 ~]$ mkdir ~/.ssh
[oracle@NOD1 ~]$ chmod 700 ~/.ssh
[oracle@NOD1 ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
60:96:10:80:22:b9:82:7b:1e:db:ab:10:78:a4:5e:fb oracle@NOD1
[oracle@NOD1 ~]$ ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_dsa.
Your public key has been saved in /home/oracle/.ssh/id_dsa.pub.
The key fingerprint is:
6c:c4:cb:94:9e:db:7d:38:02:e7:ae:f2:3a:46:88:dd oracle@NOD1
[oracle@NOD1 ~]$
在NOD2上执行
Last login: Thu Dec 31 10:30:10 2009 from nod1
[root@NOD2 ~]# su - oracle
[oracle@NOD2 ~]$ mkdir ~/.ssh
[oracle@NOD2 ~]$ chmod 700 ~/.ssh
[oracle@NOD2 ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
6b:66:fe:ed:f1:bc:73:6e:e7:34:84:7a:43:ba:4e:03 oracle@NOD2
[oracle@NOD2 ~]$ ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_dsa.
Your public key has been saved in /home/oracle/.ssh/id_dsa.pub.
The key fingerprint is:
84:5a:2a:6b:50:70:6f:4b:40:0b:3a:c0:64:6c:0f:f7 oracle@NOD2
[oracle@NOD2 ~]$
回到NOD1执行
[root@NOD1 ~]# su - oracle
[oracle@NOD1 ~]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
[oracle@NOD1 ~]$ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
[oracle@NOD1 ~]$ ssh nod2 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
The authenticity of host 'nod2 (128.1.100.145)' can't be established.
RSA key fingerprint is e8:f1:5a:88:be:6e:ef:ad:5c:a1:2e:36:9c:74:4d:a0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'nod2,128.1.100.145' (RSA) to the list of known hosts.
oracle@nod2's password:
[oracle@NOD1 ~]$ ssh nod2 cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
oracle@nod2's password:
[oracle@NOD1 ~]$ scp ~/.ssh/authorized_keys nod2:~/.ssh/authorized_keys
oracle@nod2's password:
authorized_keys 100% 1644 1.6KB/s 00:00
[oracle@NOD1 ~]$
验证登录是否需要密码
[oracle@NOD1 ~]$ ssh nod1 date
The authenticity of host 'nod1 (127.0.0.1)' can't be established.
RSA key fingerprint is e8:f1:5a:88:be:6e:ef:ad:5c:a1:2e:36:9c:74:4d:a0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'nod1' (RSA) to the list of known hosts.
四 12月 31 10:57:52 CST 2009
[oracle@NOD1 ~]$ ssh nod1-priv date
The authenticity of host 'nod1-priv (10.10.10.100)' can't be established.
RSA key fingerprint is e8:f1:5a:88:be:6e:ef:ad:5c:a1:2e:36:9c:74:4d:a0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'nod1-priv,10.10.10.100' (RSA) to the list of known hosts.
四 12月 31 10:58:00 CST 2009
[oracle@NOD1 ~]$ ssh nod2-priv date
The authenticity of host 'nod2-priv (10.10.10.101)' can't be established.
RSA key fingerprint is e8:f1:5a:88:be:6e:ef:ad:5c:a1:2e:36:9c:74:4d:a0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'nod2-priv,10.10.10.101' (RSA) to the list of known hosts.
四 12月 31 10:50:07 CST 2009
[oracle@NOD1 ~]$
配置ASMLIB（两个节点上）
必须以ROOT用户执行
[root@NOD1 oracle]# /etc/init.d/oracleasm config
Usage: /etc/init.d/oracleasm {start|stop|restart|enable|disable|configure|createdisk|deletedisk|querydisk|listdisks|scandisks|status}
[root@NOD1 oracle]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
[root@NOD1 oracle]#
创建ASM磁盘
[root@NOD1 oracle]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdc
Marking disk "VOL1" as an ASM disk: [FAILED]
[root@NOD1 oracle]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdc1
Marking disk "VOL1" as an ASM disk: [ OK ]
[root@NOD1 oracle]# /etc/init.d/oracleasm createdisk VOL2 /dev/sde1
Marking disk "VOL2" as an ASM disk: [ OK ]
[root@NOD1 oracle]# /etc/init.d/oracleasm createdisk VOL3 /dev/sdd1
Marking disk "VOL3" as an ASM disk: [ OK ]
[root@NOD1 oracle]# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [ OK ]
[root@NOD1 oracle]# /etc/init.d/oracleasm listdisks
VOL1
VOL2
VOL3
配置ORACLE集群文件系统OCFS2
下载ocfs2 软件包
http://oss.oracle.com/projects/ocfs2/files/RedHat/RHEL4/i386/1.2.9-1/
http://oss.oracle.com/projects/ocfs2-tools/files/RedHat/RHEL4/i386/1.2.7-1/
下载三个RPM包
ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686.rpm
ocfs2console-1.2.7-1.el4.i386.rpm
ocfs2-tools-1.2.7-1.el4.i386.rpm
在两个节点上安装
[root@NOD1 ~]# ls
anaconda-ks.cfg ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686.rpm
Desktop ocfs2console-1.2.7-1.el4.i386.rpm
install.log ocfs2-tools-1.2.7-1.el4.i386.rpm
install.log.syslog
[root@NOD1 ~]# rpm -ivh ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686.rpm
錯誤：相依性失敗：
ocfs2-tools >= 1.2.6 是 ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686 所需要的
[root@NOD1 ~]# rpm -ivh ocfs2-tools-1.2.7-1.el4.i386.rpm
準備中... ########################################### [100%]
1:ocfs2-tools ########################################### [100%]
[root@NOD1 ~]# rpm -ivh ocfs2console-1.2.7-1.el4.i386.rpm
準備中... ########################################### [100%]
1:ocfs2console ########################################### [100%]
[root@NOD1 ~]# rpm -ivh ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686.rpm
準備中... ########################################### [100%]
1:ocfs2-2.6.9-78.EL ########################################### [100%]
[root@NOD1 ~]# rpm -qa | grep ocfs
ocfs2-2.6.9-78.EL-1.2.9-1.el4
ocfs2-tools-1.2.7-1.el4
ocfs2console-1.2.7-1.el4
[root@NOD1 ~]#
打开Xmanager连接NOD1，启动终端输入
Export DISPLAY=128.1.100.204:0.0
遭遇错误
检查了一下内核和OCFS2包
发现时内核版本不对，还真不容易看出来
因该是
ocfs2-2.6.9-78.ELsmp-1.2.9-1.el4.i686.rpm
我下了
ocfs2-2.6.9-78.EL-1.2.9-1.el4.i686.rpm
少了一个smp。
卸载ocfs2-2.6.9-78.EL-1.2.9-1.el4
Rpm –e ocfs2-2.6.9-78.EL-1.2.9-1.el4
重新下载安装
安装完之后在两个节点上配置/etc/init.d/o2cb
[root@NOD1 ~]# /etc/init.d/o2cb configure
Configuring the O2CB driver.
This will configure the on-boot properties of the O2CB driver.
The following questions will determine whether the driver is loaded on
boot. The current values will be shown in brackets ('[]'). Hitting
<ENTER> without typing an answer will keep that current value. Ctrl-C
will abort.
Load O2CB driver on boot (y/n) [y]: y
Cluster to start on boot (Enter "none" to clear) [ocfs2]:
Specify heartbeat dead threshold (>=7) [61]: 61
Specify network idle timeout in ms (>=5000) [30000]: 30000
Specify network keepalive delay in ms (>=1000) [2000]: 2000
Specify network reconnect delay in ms (>=2000) [2000]: 2000
Writing O2CB configuration: OK
Starting O2CB cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration matches this machine's host name.
Stopping O2CB cluster ocfs2: OK
[root@NOD1 ~]# /etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Offline
[root@NOD1 ~]#
启动ocfs2console
添加nod1,nod2节点。
选择Propagate Configuration 复制到nod2
在NOD2上查看
[root@NOD2 ~]# cat /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 128.1.100.144
number = 0
name = nod1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 128.1.100.145
number = 1
name = nod2
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
[root@NOD2 ~]#
重新在两个节点上配置O2CB驱动
[root@NOD1 ~]# /etc/init.d/o2cb unload
Stopping O2CB cluster ocfs2: OK
Unmounting ocfs2_dlmfs filesystem: OK
Unloading module "ocfs2_dlmfs": OK
Unmounting configfs filesystem: OK
Unloading module "configfs": OK
[root@NOD1 ~]# /etc/init.d/o2cb configure
Configuring the O2CB driver.
This will configure the on-boot properties of the O2CB driver.
The following questions will determine whether the driver is loaded on
boot. The current values will be shown in brackets ('[]'). Hitting
<ENTER> without typing an answer will keep that current value. Ctrl-C
will abort.
Load O2CB driver on boot (y/n) [y]: y
Cluster to start on boot (Enter "none" to clear) [ocfs2]:
Specify heartbeat dead threshold (>=7) [61]: 60
Specify network idle timeout in ms (>=5000) [30000]: 30000
Specify network keepalive delay in ms (>=1000) [2000]:
Specify network reconnect delay in ms (>=2000) [2000]:
Writing O2CB configuration: OK
Loading module "configfs": OK
Mounting configfs filesystem at /config: OK
Loading module "ocfs2_nodemanager": OK
Loading module "ocfs2_dlm": OK
Loading module "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
Starting O2CB cluster ocfs2: OK
[root@NOD1 ~]#
格式化文件系统
打开ocfs2console---tasks----format
在两个节点上挂载文件系统
[root@NOD1 /]# su - oracle
[oracle@NOD1 ~]$ mkdir ocfs
[oracle@NOD1 ~]$ ls
ln ocfs p
[oracle@NOD1 ~]$ su
Password:
[root@NOD1 oracle]#
[oracle@NOD1 ~]$ su
Password:
[root@NOD1 oracle]# mount /dev/sdb
sdb sdb1
[root@NOD1 oracle]# mount /dev/sdb1 ocfs/
[root@NOD1 oracle]#
启动时挂载文件系统
[root@NOD2 ~]# vim /etc/fstab
/dev/sdb1 /home/oracle/ocfs ocfs2 _netdev,datavolume,nointr 0 0
创建 Oracle 集群件目录。在 OCR 和表决磁盘将驻留的 OCFS2 文件系统中创建目录
[root@NOD1 oracle]# mkdir /home/oracle/ocfs/clusterware
[root@NOD1 oracle]# chown -R oracle:dba /home/oracle/ocfs/
[root@NOD1 oracle]#
到目前为止，已经完成了再两个节点上的OCFS设置
安装VMWARE TOOLS，用来同步虚拟机和主机的时间
关闭NOD1,NOD2，载入linux.iso镜像F:\Program Files\VMware\VMware Server\linux.iso
启动，安装VMWARE TOOLS。
执行“vmware-toolbox”以显示 VMware Tools Properties 窗口。/* Wilson注：vmware-toolbox是一个可执行文件，直接在Terminal窗口中以root身份敲vmware-toolbox就可以执行它了 */ 在Options 选项卡下，选择Time synchronization between the virtual machine and the host operating system。您应该发现 tools.syncTime = "TRUE" 参数已经追加到虚拟机配置文件d:\vm\rac\rac1\Red Hat Enterprise Linux 4.vmx 中。
编辑 /boot/grub/grub.conf，并将选项“clock=pit nosmp noapic nolapic”添加到读取内核 /boot/ 的那一行。您已经将选项添加到两个内核，现在只需对特定内核进行更改。
3. #boot=/dev/sda
4. default=0
5. timeout=5
6. splashimage=(hd0,0)/boot/grub/splash.xpm.gz
7. hiddenmenu
8. title Enterprise (2.6.9-42.0.0.0.1.ELsmp)
9. root (hd0,0)
10. kernel /boot/vmlinuz-2.6.9-42.0.0.0.1.ELsmp ro
11. root=LABEL=/ rhgb quiet clock=pit nosmp noapic nolapic
12. initrd /boot/initrd-2.6.9-42.0.0.0.1.ELsmp.img
13. title Enterprise-up (2.6.9-42.0.0.0.1.EL)
14. root (hd0,0)
15. kernel /boot/vmlinuz-2.6.9-42.0.0.0.1.EL ro root=LABEL=/
16. rhgb quiet clock=pit nosmp noapic nolapic
17. initrd /boot/initrd-2.6.9-42.0.0.0.1.EL.img
18. 重新引导 rac1。
# reboot
使用SSH secure FILE TRANSFER把clusterware 和10G database安装程序上传到NOD1上
Unzip 到/home/目录下
Su 到oracle用户
进入到clusterware目录执行
[oracle@NOD1 clusterware]$ ./runInstaller
选择ORACrs10g_HOME安装目录
忽视内存要求警告
添加NOD2节点
NOD2
NOD2-PRIV
NOD2-VIP
指定网卡，一般默认就可以了
指定 Oracle 集群注册表 (OCR) 位置：选择External Redundancy。为了简单起见，这里将不镜像 OCR。在生产环境中，您可能会考虑复用 OCR 以实现更高的冗余。
指定 OCR 位置：/home/oracle/ocfs/clusterware/ocr
指定表决磁盘位置：选择 External Redundancy。同样，为了简单起见，我们选择不镜像表决磁盘。
表决磁盘位置：/home/oracle/ocfs/clusterware/votingdisk
安装
依次在NOD1,NOD2上以ROOT用户运行脚本
[root@NOD1 oracle]# /home/ora10g/oraInventory/orainstRoot.sh
[root@NOD2 ~]# /home/ora10g/oraInventory/orainstRoot.sh
[root@NOD1 oracle]# /home/ora10g/product/10.2.0/crs_1/root.sh
[root@NOD1 oracle]# /home/ora10g/product/10.2.0/crs_1/root.sh
在NOD2上执行root.sh报错
[root@NOD2 home]# /home/ora10g/product/10.2.0/crs_1/root.sh
WARNING: directory '/home/ora10g/product/10.2.0' is not owned by root
WARNING: directory '/home/ora10g/product' is not owned by root
WARNING: directory '/home/ora10g' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/home/ora10g/product/10.2.0' is not owned by root
WARNING: directory '/home/ora10g/product' is not owned by root
WARNING: directory '/home/ora10g' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname nod1 for node 1.
assigning default hostname nod2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: nod1 nod1-priv nod1
node 2: nod2 nod2-priv nod2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
nod1
nod2
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
在输入参数中指定的节点名 "NOD1" 无效。
在输入参数中指定的节点名 "NOD1" 无效。
在OUI界面点确定OCA检查失败。点确定退出
在XMANAGER窗口重新打开一个窗口，以ROOT身份运行
/home/ora10g/product/10.2.0/crs_1/bin/vipca弹出图形窗口，点击下一步
选择eth0，下一步，输入IP别名Nod1-vip，其他的信息自动弹出来。下一步，安装VIP，
GSD,ONS
确定后退出。
在NOD1,NOD2上验证集群服务设置
[root@NOD1 bin]# su - oracle
[oracle@NOD1 ~]$ cd /home/ora10g/product/10.2.0/crs_1/bin/
[oracle@NOD1 bin]$ ./cluvfy stage -post crsinst -n nod1,nod2
执行 群集服务设置 的后期检查
正在检查节点的可访问性...
节点 "NOD1" 的节点可访问性检查已通过。
正在检查等同用户...
用户 "oracle" 的等同用户检查已通过。
正在检查集群管理器完整性...
正在检查 CSS 守护程序...
"CSS daemon" 的 守护程序状态 检查已通过。
集群管理器完整性检查已通过。
正在检查集群完整性...
集群完整性检查已通过
正在检查 OCR 完整性...
正在检查是否缺少非集群配置...
所有节点都没有非集群的, 仅限本地的配置。
OCR 设备的唯一性检查已通过。
正在检查 OCR 的版本...
正确版本 "2" 的 OCR 存在。
正在检查 OCR 数据完整性...
OCR 数据完整性检查已通过。
OCR 完整性检查已通过。
正在检查 CRS 完整性...
正在检查守护程序的活动性...
"CRS daemon" 的活动性检查已通过。
正在检查守护程序的活动性...
"CSS daemon" 的活动性检查已通过。
正在检查守护程序的活动性...
"EVM daemon" 的活动性检查已通过。
正在检查 CRS 健康状况...
CRS 健康状况检查已通过。
CRS 完整性检查已通过。
正在检查节点应用程序是否存在...
正在检查 VIP 节点应用程序是否存在(必需)
检查已通过。
正在检查 ONS 节点应用程序是否存在(可选)
检查已通过。
正在检查 GSD 节点应用程序是否存在(可选)
检查已通过。
群集服务设置 的后期检查成功。
[oracle@NOD1 bin]$
检查通过
这里还是不知道那个节点名无效错误时怎么产生的。网上搜了一下，很多人遇到的是eth0 is not public。。。。是因为公共接口是不可路由的IP导致。哪位兄弟遇到过把解决方法告诉我一下。。。