功能：
1）master的故障切换(keepalived VIP的飘移）
2）主从复制角色的提升和重新转向
其中master 对外提供写服务，备选master2(实际的slave提供读服务，slave1和slave2也提供相关的读服务，一旦master1宕机，将会把备选的master2提升为新的master1，slave1和slave2指向新的master
3）MHA由两部分组成，MHA manager（管理节点）和MHA node（数据节点），MHA manager可以单独部署一台独立的机器上管理多个master-slave集群,也可以部署一台slave上。MHA node 运行在每台mysql服务器上及manager服务器上，MHA manager会定时探测集群中的master节点，当matser出现故障，它可以自动拥有最新数据的slave提升为新的master，然后将所有其他的slave重新指向提升的master.
5台机器
Master1主机192.168.30.25 server1 写
Master2 备主机192.168.30.24 server2 写
Slave1主机192.168.30.23 server3 读
Slave2主机192.168.30.21 server4 读
manager主机192.168.30.26 server5 监控复制组
配置所有主机名映射主机名一定要写清楚，因为后面实验会用到
[root@bogon ~]# vim /etc/hosts
192.168.30.25 server1
192.168.30.24 server2
192.168.30.23 server3
192.168.30.21 server4
192.168.30.26 server5
关闭所有主机防火墙
Systemctl stop firewalld
Setenforce 0
Iptables -F
Systemctl disadble firewalld
下载mha-manager 和mha-node
所有主机安装mha node 及相关perl依赖包
rpm -ivh epel-release-latest-7.noarch.rpm epel源可以在阿里云镜像网站下载
yum install -y perl-DBD-MySQL.x86_64 perl-DBI.x86_64 perl-CPAN perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker
安装后检查是否全部安装
软件包 perl-DBD-MySQL-4.023-6.el7.x86_64 已安装并且是最新版本
软件包 perl-DBI-1.627-4.el7.x86_64 已安装并且是最新版本
软件包 perl-CPAN-1.9800-292.el7.noarch 已安装并且是最新版本
软件包 1:perl-ExtUtils-CBuilder-0.28.2.6-292.el7.noarch 已安装并且是最新版本
软件包 perl-ExtUtils-MakeMaker-6.68-3.el7.noarch 已安装并且是最新版本
无须任何处理
所有主机安装mha node
tar xf mha4mysql-node-0.56.tar.gz
cd mha4mysql-node-0.56/
perl Makefile.PL
make && make install
Mha node安装后在/usr/local/bin生成以下脚本
[root@bogon ~]# ls -l /usr/local/bin
总用量 40
-r-xr-xr-x. 1 root root 16346 4月 11 12:29 apply_diff_relay_logs
-r-xr-xr-x. 1 root root 4807 4月 11 12:29 filter_mysqlbinlog
-r-xr-xr-x. 1 root root 7401 4月 11 12:29 purge_relay_logs
-r-xr-xr-x. 1 root root 7395 4月 11 12:29 save_binary_logs
Server5机器安装mha manager 只需一台作为manager监控即可
[root@bogon ~]# yum install -y perl perl-Log-Dispatch perl-Parallel-ForkManager perl-DBD-MySQL perl-DBI perl-Time-HiRes
之前时候安装会安装不上,需要rpm包，添进去就可以
有的时候本地yum仓库没有log包和perl-parallel,需要去联网阿里云的yum仓库，epel一定要放在/etc/yum.repos.d下，不然找不到包的位置
wget -O /etc/yum.repos.d/aliyun.repo https://mirrors.aliyun.com/repo/Centos-7.repo
[root@bogon ~]# rpm -ivh perl-Config-Tiny-2.14-7.el7.noarch.rpm 必须加上
安装mha manager软件包
tar xf mha4mysql-manager-0.56.tar.gz
cd mha4mysql-manager-0.56/
perl Makefile.PL
make && make install
安装后会有以下脚本文件
[root@bogon mha4mysql-manager-0.56]# ls -l /usr/local/bin
总用量 76
-r-xr-xr-x. 1 root root 16346 4月 11 12:29 apply_diff_relay_logs
-r-xr-xr-x. 1 root root 4807 4月 11 12:29 filter_mysqlbinlog
-r-xr-xr-x. 1 root root 1995 4月 11 13:31 masterha_check_repl
-r-xr-xr-x. 1 root root 1779 4月 11 13:31 masterha_check_ssh
-r-xr-xr-x. 1 root root 1865 4月 11 13:31 masterha_check_status
-r-xr-xr-x. 1 root root 3201 4月 11 13:31 masterha_conf_host
-r-xr-xr-x. 1 root root 2517 4月 11 13:31 masterha_manager
-r-xr-xr-x. 1 root root 2165 4月 11 13:31 masterha_master_monitor
-r-xr-xr-x. 1 root root 2373 4月 11 13:31 masterha_master_switch
-r-xr-xr-x. 1 root root 3879 4月 11 13:31 masterha_secondary_check
-r-xr-xr-x. 1 root root 1739 4月 11 13:31 masterha_stop
-r-xr-xr-x. 1 root root 7401 4月 11 12:29 purge_relay_logs
-r-xr-xr-x. 1 root root 7395 4月 11 12:29 save_binary_logs
配置SSH 秘钥对验证
服务器先生成一个秘钥对
把自己的公钥传给对方
[root@server5 ~]# ssh-keygen -t rsa
[root@server5 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.25
[root@server5 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.24
[root@server5 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.23
[root@server5 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.21
Server 5 (192.168.30.26)上
注意每个都需要进行测试，输入yes ，这样不影响故障切换，对每个主机号SSH控制
[root@server5 ~]# ssh server1
[root@server5 ~]# ssh server2
[root@server5 ~]# ssh server3
[root@server5 ~]# ssh server4
Master(192.168.30.25):
[root@server1 ~]# ssh-keygen -t rsa
[root@server1 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.24
[root@server1 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.23
[root@server1 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.21
Master2(192.168.30.24):
[root@server2 ~]# ssh-keygen -t rsa
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.25
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.23
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.21
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.26
Slave1(192.168.30.23):
[root@server3 ~]# ssh-keygen -t rsa
[root@server3 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.25
[root@server3 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.24
[root@server3 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.21
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.26
Slave2(192.168.30.21):
[root@server4 ~]# ssh-keygen -t rsa
[root@server4 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.25
[root@server4 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.24
[root@server4 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.23
[root@server2 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.30.26
安装MySQL
25-24-23-21 主机都安装mysql
[root@server1~]# yum -y install mariadb mariadb-server mariadb-devel
[root@server1 ~]# systemctl start mariadb
设置数据库密码
[root@server1~]# mysqladmin -u root password 123456
[root@server1 ~]# mysql -u root -p123456
搭建主从复制环境
修改mysql 主机的配置文件
Master (192.168.30.25):
[mysqld]
server-id = 1
log-bin=master-bin
log-slave-updates=true
relay_log_purge=0
[root@server1 ~]# systemctl restart mariadb
Master2(192.168.30.24):
[mysqld]
server-id = 2
log-bin=master-bin
log-slave-updates=true
relay_log_purge=0
[root@server2 ~]# systemctl restart mariadb
Slave1(192.168.30.23):
[mysqld]
server-id = 3
log-bin=mysql-bin
relay-log=slave-relay-bin
log-slave-updates=true
relay_log-purge=0
[root@server3 ~]# systemctl restart mariadb
Slave2(192.168.30.21):
[mysqld]
server-id = 4
log-bin=mysql-bin
relay-log=slave-relay-bin
log-slave-updates=true
relay_log_purge=0
[root@server4 ~]# systemctl restart mariadb
Mysql 服务器都创建复制授权用户
MariaDB [(none)]> grant replication slave on *.* to 'repl'@'192.168.30.%'identified by '123456';
flush privileges;
查看主库备份时的binlog名称和位置
MariaDB [(none)]> show master status;
+-------------------+----------+--------------+------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+-------------------+----------+--------------+------------------+
| master-bin.000001 | 472 | | |
+-------------------+----------+--------------+------------------+
给24-23-21从服务器 授权主master的ip：192.168.30.25 日志文件需要写master上的
MariaDB [(none)]> stop slave;
MariaDB [(none)]> change master to
-> master_host='192.168.30.25',
-> master_user='repl',
-> master_password='123456',
-> master_log_file='master-bin.000001',
-> master_log_pos=472;
MariaDB [(none)]> start slave;
MariaDB [(none)]> show slave statusG
并且为 yes
Yes
三台slave服务器设置read_only状态 （读）
从库对外只提供读服务，只所有没有写进mysql配置文件，是因为随时server2会提升为master
[root@server2 ~]# mysql -uroot -p123456 -e 'set global read_only=1'
[root@server3 ~]# mysql -u root -p123456 -e 'set global read_only=1'
[root@server4 ~]# mysql -u root -p123456 -e 'set global read_only=1'
创建监控用户（25-24-23-21 主机上操作）
MariaDB [(none)]> grant all privileges on *.* to 'root'@'192.168.30.%' identified by '123456';
MariaDB [(none)]> flush privileges;
为自己的主机名授权
MariaDB [(none)]> grant all privileges on *.* to 'root'@'server1' identified by '123456';
MariaDB [(none)]> flush privileges;
到这里整个mysql 主从集群环境已经搭建完毕
配置MHA环境
创建MHA的工作目录及相关配置文件
Server5(192.168.30.26）：在软件包加压后的目录里面有样配置文件
修改app1.cnf配置文件
/usr/local/bin/master_ip_failover 脚本需要根据自己环境修改IP和网卡名称等
[root@server5 ~]# mkdir /etc/masterha
[root@server5 ~]# cp mha4mysql-manager-0.56/samples/conf/app1.cnf /etc/masterha/
[root@server5 ~]# vim /etc/masterha/app1.cnf
[server default]
manager_workdir=/var/log/masterha/app1
manager_log=/var/log/masterha/app1/manager.log
master_binlog_dir=/var/lib/mysql
master_ip_failover_script=/usr/local/bin/master_ip_failover
password=123456
user=root
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=repl
[server1]
hostname=server1
port=3306
#candidate_master=1
[server2]
hostname=server2
candidate_master=1
port=3306
check_repl_delay=0
[server3]
hostname=server3
port=3306
[server4]
hostname=server4
port=3306
配置故障转移脚本
[root@server5 ~]# vim /usr/local/bin/master_ip_failover
#!/usr/bin/env perl
use strict;
use warnings FATAL =>'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $vip = '192.168.30.254'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig ens33:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig ens33:$key down";
$ssh_user="root";
GetOptions(
'command=s' => $command,
'ssh_user=s' => $ssh_user,
'orig_master_host=s' => $orig_master_host,
'orig_master_ip=s' => $orig_master_ip,
'orig_master_port=i' => $orig_master_port,
'new_master_host=s' => $new_master_host,
'new_master_ip=s' => $new_master_ip,
'new_master_port=i' => $new_master_port,
);
exit &main();
sub main {
print " IN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip=== ";
if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
@
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
#eval {
#print "Disabling the VIP - $vip on old master: $orig_master_host ";
#&stop_vip();
# $exit_code = 0;
# };
eval {
print "Disabling the VIP on old master: $orig_master_host ";
#my $ping=`ping -c 1 10.0.0.13 |grep "packet loss" |awk -F',''{print $3}' |awk '{print $1}'`;
#if ($ping le "90.0%"&& $ping gt "0.0%" ){
#$exit_code = 0;
#}
#else {
& stop_vip();
# updating global catalog, etc
$exit_code = 0;
#}
};
if ($@) {
warn "Got Error: $@ ";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on new master: $new_master_host ";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK ";
`ssh $ssh_user@$orig_master_host " $ssh_start_vip "`;
exit 0;
}
else {
&usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user@$new_master_host " $ssh_start_vip "`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user@$orig_master_host " $ssh_stop_vip "`;
}
sub usage {
"Usage: master_ip_failover –command=start|stop|stopssh|status –orig_master_host=host –orig_master_ip=ip –orig_master_port=po
rt –new_master_host=host –new_master_ip=ip –new_master_port=port ";
}
[root@server5 ~]# chmod +x /usr/local/bin/master_ip_failover
设置从库relay log 的清除方式（24-23-21）
手动清除
mysql -u root -p123456 -e 'set global relay_log_purge=0;'
配置从库（24-23-21）relay_log清除脚本加入计划任务
[root@server2 ~]# vim purge_relay_log.sh
!/bin/bash
user=root
passwd=123456
port=3306
log_dir='/tmp'
work_dir='/tmp'
purge='/usr/local/bin/purge_relay_logs'
if [ ! -d $log_dir ]
then
mkdir $log_dir -p
fi
$purge --user=$user --password=$password --disable_relay_log_purge --port=$port --workdir=$work_dir >> $log_dir/purge_relay_logs.log 2>&1
[root@server2 ~]# chmod +x purge_relay_log.sh
[root@server2 ~]# crontab -e
0 4 * * * /bin/bash /root/purgr_relay_log.sh
手动清除中继日志在从节点上
在从（24-23-21）
[root@server2 ~]# purge_relay_logs --user=root --password=123456 --disable_relay_log_purge --port=3306 --workdir=/tmp
检测MHA shh 通信状态
[root@server5 ~]# masterha_check_ssh --conf=/etc/masterha/app1.cnf
[root@server5 ~]# masterha_check_ssh --conf=/etc/masterha/app1.cnf
Sat Apr 13 19:42:47 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sat Apr 13 19:42:47 2019 - [info] Reading application default configurations from /etc/masterha/app1.cnf..
Sat Apr 13 19:42:47 2019 - [info] Reading server configurations from /etc/masterha/app1.cnf..
Sat Apr 13 19:42:47 2019 - [info] Starting SSH connection tests..
Sat Apr 13 19:42:51 2019 - [debug]
Sat Apr 13 19:42:48 2019 - [debug] Connecting via SSH from root@server2(192.168.30.24:22) to root@server1(192.168.30.25:22)..
Sat Apr 13 19:42:49 2019 - [debug] ok.
Sat Apr 13 19:42:49 2019 - [debug] Connecting via SSH from root@server2(192.168.30.24:22) to root@server3(192.168.30.23:22)..
Sat Apr 13 19:42:50 2019 - [debug] ok.
Sat Apr 13 19:42:50 2019 - [debug] Connecting via SSH from root@server2(192.168.30.24:22) to root@server4(192.168.30.21:22)..
Sat Apr 13 19:42:51 2019 - [debug] ok.
Sat Apr 13 19:42:51 2019 - [debug]
Sat Apr 13 19:42:47 2019 - [debug] Connecting via SSH from root@server1(192.168.30.25:22) to root@server2(192.168.30.24:22)..
Sat Apr 13 19:42:48 2019 - [debug] ok.
Sat Apr 13 19:42:48 2019 - [debug] Connecting via SSH from root@server1(192.168.30.25:22) to root@server3(192.168.30.23:22)..
Sat Apr 13 19:42:49 2019 - [debug] ok.
Sat Apr 13 19:42:49 2019 - [debug] Connecting via SSH from root@server1(192.168.30.25:22) to root@server4(192.168.30.21:22)..
Sat Apr 13 19:42:50 2019 - [debug] ok.
Sat Apr 13 19:42:51 2019 - [debug]
Sat Apr 13 19:42:48 2019 - [debug] Connecting via SSH from root@server3(192.168.30.23:22) to root@server1(192.168.30.25:22)..
Sat Apr 13 19:42:50 2019 - [debug] ok.
Sat Apr 13 19:42:50 2019 - [debug] Connecting via SSH from root@server3(192.168.30.23:22) to root@server2(192.168.30.24:22)..
Sat Apr 13 19:42:50 2019 - [debug] ok.
Sat Apr 13 19:42:50 2019 - [debug] Connecting via SSH from root@server3(192.168.30.23:22) to root@server4(192.168.30.21:22)..
Sat Apr 13 19:42:51 2019 - [debug] ok.
Sat Apr 13 19:42:52 2019 - [debug]
Sat Apr 13 19:42:49 2019 - [debug] Connecting via SSH from root@server4(192.168.30.21:22) to root@server1(192.168.30.25:22)..
Sat Apr 13 19:42:50 2019 - [debug] ok.
Sat Apr 13 19:42:50 2019 - [debug] Connecting via SSH from root@server4(192.168.30.21:22) to root@server2(192.168.30.24:22)..
Sat Apr 13 19:42:51 2019 - [debug] ok.
Sat Apr 13 19:42:51 2019 - [debug] Connecting via SSH from root@server4(192.168.30.21:22) to root@server3(192.168.30.23:22)..
Sat Apr 13 19:42:52 2019 - [debug] ok.
Sat Apr 13 19:42:52 2019 - [info] All SSH connection tests passed successfully.
检查整个集群的状态
[root@server5 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf
[root@server5 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf
Sat Apr 13 20:05:46 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sat Apr 13 20:05:46 2019 - [info] Reading application default configurations from /etc/masterha/app1.cnf..
Sat Apr 13 20:05:46 2019 - [info] Reading server configurations from /etc/masterha/app1.cnf..
Sat Apr 13 20:05:46 2019 - [info] MHA::MasterMonitor version 0.56.
Sat Apr 13 20:05:47 2019 - [info] Dead Servers:
Sat Apr 13 20:05:47 2019 - [info] Alive Servers:
Sat Apr 13 20:05:47 2019 - [info] server1(192.168.30.25:3306)
Sat Apr 13 20:05:47 2019 - [info] server2(192.168.30.24:3306)
Sat Apr 13 20:05:47 2019 - [info] server3(192.168.30.23:3306)
Sat Apr 13 20:05:47 2019 - [info] server4(192.168.30.21:3306)
Sat Apr 13 20:05:47 2019 - [info] Alive Slaves:
Sat Apr 13 20:05:47 2019 - [info] server2(192.168.30.24:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:05:47 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:05:47 2019 - [info] Primary candidate for the new Master (candidate_master is set)
Sat Apr 13 20:05:47 2019 - [info] server3(192.168.30.23:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:05:47 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:05:47 2019 - [info] server4(192.168.30.21:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:05:47 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:05:47 2019 - [info] Current Alive Master: server1(192.168.30.25:3306)
Sat Apr 13 20:05:47 2019 - [info] Checking slave configurations..
Sat Apr 13 20:05:47 2019 - [warning] relay_log_purge=0 is not set on slave server2(192.168.30.24:3306).
Sat Apr 13 20:05:47 2019 - [warning] relay_log_purge=0 is not set on slave server3(192.168.30.23:3306).
Sat Apr 13 20:05:47 2019 - [warning] relay_log_purge=0 is not set on slave server4(192.168.30.21:3306).
Sat Apr 13 20:05:47 2019 - [info] Checking replication filtering settings..
Sat Apr 13 20:05:47 2019 - [info] binlog_do_db= , binlog_ignore_db=
Sat Apr 13 20:05:47 2019 - [info] Replication filtering check ok.
Sat Apr 13 20:05:47 2019 - [info] Starting SSH connection tests..
Sat Apr 13 20:05:53 2019 - [info] All SSH connection tests passed successfully.
Sat Apr 13 20:05:53 2019 - [info] Checking MHA Node version..
Sat Apr 13 20:05:54 2019 - [info] Version check ok.
Sat Apr 13 20:05:54 2019 - [info] Checking SSH publickey authentication settings on the current master..
Sat Apr 13 20:05:54 2019 - [info] HealthCheck: SSH to server1 is reachable.
Sat Apr 13 20:05:54 2019 - [info] Master MHA Node version is 0.56.
Sat Apr 13 20:05:54 2019 - [info] Checking recovery script configurations on the current master..
Sat Apr 13 20:05:54 2019 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/var/lib/mysql --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=master-bin.000002
Sat Apr 13 20:05:54 2019 - [info] Connecting to root@server1(server1)..
Creating /tmp if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /var/lib/mysql, up to master-bin.000002
Sat Apr 13 20:05:55 2019 - [info] Master setting check done.
Sat Apr 13 20:05:55 2019 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Sat Apr 13 20:05:55 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server2 --slave_ip=192.168.30.24 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:05:55 2019 - [info] Connecting to root@192.168.30.24(server2:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to mariadb-relay-bin.000002
Temporary relay log file is /var/lib/mysql/mariadb-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:05:55 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server3 --slave_ip=192.168.30.23 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:05:55 2019 - [info] Connecting to root@192.168.30.23(server3:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:05:56 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server4 --slave_ip=192.168.30.21 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:05:56 2019 - [info] Connecting to root@192.168.30.21(server4:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:05:56 2019 - [info] Slaves settings check done.
Sat Apr 13 20:05:56 2019 - [info]
server1 (current master)
+--server2
+--server3
+--server4
Sat Apr 13 20:05:56 2019 - [info] Checking replication health on server2..
Sat Apr 13 20:05:56 2019 - [info] ok.
Sat Apr 13 20:05:56 2019 - [info] Checking replication health on server3..
Sat Apr 13 20:05:56 2019 - [info] ok.
Sat Apr 13 20:05:56 2019 - [info] Checking replication health on server4..
Sat Apr 13 20:05:56 2019 - [info] ok.
Sat Apr 13 20:05:56 2019 - [info] Checking master_ip_failover_script status:
Sat Apr 13 20:05:56 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=server1 --orig_master_ip=192.168.30.25 --orig_master_port=3306
Checking the Status of the script.. OK
Sat Apr 13 20:05:56 2019 - [info] OK.
Sat Apr 13 20:05:56 2019 - [warning] shutdown_script is not defined.
Sat Apr 13 20:05:56 2019 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
VIP配置管理
打开在前面编辑的文件/etc/masterha/app1.cnf检查如下行是否正确，再检查集群状态
[root@server5 ~]# grep -n 'master_ip_failover_script' /etc/masterha/app1.cnf
5:master_ip_failover_script=/usr/local/bin/master_ip_failover
Master1(192.168.30.25)
[root@server1 ~]# ip a |grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
inet 192.168.30.25/24 brd 192.168.30.255 scope global noprefixroute ens33
inet 192.168.30.254/24 brd 192.168.30.255 scope global secondary ens33:1
Server5(192.168.30.26)修改故障转移脚本
[root@server5 ~]# head -15 /usr/local/bin/master_ip_failover
#!/usr/bin/env perl
use strict;
use warnings FATAL =>'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $vip = '192.168.30.254'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig ens33:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig ens33:$key down";
/usr/local/bin/master_ip_failover 文件的内容意思当主库发生故障时，会触发MHA切换
。MHA manager 会停掉主库的ens33:1接口，触发虚拟IP飘移到备选从库，从而完成切换
Server5 (192.168.30.26),检查manager 状态
[root@server5 ~]# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 is stopped(2:NOT_RUNNING).
如果正常会显示ping OK，否则会显示not_running，代表MHA 监控没有开启
Server5 (192.168.30.26) 开启manager 监控
--remove_dead_master_conf 代表党发送主从切换后，老的主库的IP将会从配置文件中移除
[root@server5 ~]# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover< /dev/null > /var/log/masterha/app1/manager.log 2>&1&
[1] 10458
Server5(192.168.30.26) 查看server5 监控是否正常
[root@server5 ~]# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:10458) is running(0:PING_OK), master:server1
可以看见已经在监控了
Server5(192.168.30.26)查看启动日志
[root@server5 ~]# cat /var/log/masterha/app1/manager.log
Sat Apr 13 20:27:40 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sat Apr 13 20:27:40 2019 - [info] Reading application default configurations from /etc/masterha/app1.cnf..
Sat Apr 13 20:27:40 2019 - [info] Reading server configurations from /etc/masterha/app1.cnf..
Sat Apr 13 20:27:40 2019 - [info] MHA::MasterMonitor version 0.56.
Sat Apr 13 20:27:41 2019 - [info] Dead Servers:
Sat Apr 13 20:27:41 2019 - [info] Alive Servers:
Sat Apr 13 20:27:41 2019 - [info] server1(192.168.30.25:3306)
Sat Apr 13 20:27:41 2019 - [info] server2(192.168.30.24:3306)
Sat Apr 13 20:27:41 2019 - [info] server3(192.168.30.23:3306)
Sat Apr 13 20:27:41 2019 - [info] server4(192.168.30.21:3306)
Sat Apr 13 20:27:41 2019 - [info] Alive Slaves:
Sat Apr 13 20:27:41 2019 - [info] server2(192.168.30.24:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:27:41 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:27:41 2019 - [info] Primary candidate for the new Master (candidate_master is set)
Sat Apr 13 20:27:41 2019 - [info] server3(192.168.30.23:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:27:41 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:27:41 2019 - [info] server4(192.168.30.21:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 20:27:41 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 20:27:41 2019 - [info] Current Alive Master: server1(192.168.30.25:3306)
Sat Apr 13 20:27:41 2019 - [info] Checking slave configurations..
Sat Apr 13 20:27:41 2019 - [warning] relay_log_purge=0 is not set on slave server2(192.168.30.24:3306).
Sat Apr 13 20:27:41 2019 - [warning] relay_log_purge=0 is not set on slave server3(192.168.30.23:3306).
Sat Apr 13 20:27:41 2019 - [warning] relay_log_purge=0 is not set on slave server4(192.168.30.21:3306).
Sat Apr 13 20:27:41 2019 - [info] Checking replication filtering settings..
Sat Apr 13 20:27:41 2019 - [info] binlog_do_db= , binlog_ignore_db=
Sat Apr 13 20:27:41 2019 - [info] Replication filtering check ok.
Sat Apr 13 20:27:41 2019 - [info] Starting SSH connection tests..
Sat Apr 13 20:27:46 2019 - [info] All SSH connection tests passed successfully.
Sat Apr 13 20:27:46 2019 - [info] Checking MHA Node version..
Sat Apr 13 20:27:47 2019 - [info] Version check ok.
Sat Apr 13 20:27:47 2019 - [info] Checking SSH publickey authentication settings on the current master..
Sat Apr 13 20:27:48 2019 - [info] HealthCheck: SSH to server1 is reachable.
Sat Apr 13 20:27:48 2019 - [info] Master MHA Node version is 0.56.
Sat Apr 13 20:27:48 2019 - [info] Checking recovery script configurations on the current master..
Sat Apr 13 20:27:48 2019 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/var/lib/mysql --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=master-bin.000002
Sat Apr 13 20:27:48 2019 - [info] Connecting to root@server1(server1)..
Creating /tmp if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /var/lib/mysql, up to master-bin.000002
Sat Apr 13 20:27:48 2019 - [info] Master setting check done.
Sat Apr 13 20:27:48 2019 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Sat Apr 13 20:27:48 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server2 --slave_ip=192.168.30.24 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:27:48 2019 - [info] Connecting to root@192.168.30.24(server2:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to mariadb-relay-bin.000002
Temporary relay log file is /var/lib/mysql/mariadb-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:27:49 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server3 --slave_ip=192.168.30.23 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:27:49 2019 - [info] Connecting to root@192.168.30.23(server3:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:27:49 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server4 --slave_ip=192.168.30.21 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 20:27:49 2019 - [info] Connecting to root@192.168.30.21(server4:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 20:27:50 2019 - [info] Slaves settings check done.
Sat Apr 13 20:27:50 2019 - [info]
server1 (current master)
+--server2
+--server3
+--server4
Sat Apr 13 20:27:50 2019 - [info] Checking master_ip_failover_script status:
Sat Apr 13 20:27:50 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=server1 --orig_master_ip=192.168.30.25 --orig_master_port=3306
Checking the Status of the script.. OK
Sat Apr 13 20:27:50 2019 - [info] OK.
Sat Apr 13 20:27:50 2019 - [warning] shutdown_script is not defined.
Sat Apr 13 20:27:50 2019 - [info] Set master ping interval 1 seconds.
Sat Apr 13 20:27:50 2019 - [warning] secondary_check_script is not defined. It is highly recommended setting it to check master reachability from two or more routes.
Sat Apr 13 20:27:50 2019 - [info] Starting ping health check on server1(192.168.30.25:3306)..
Sat Apr 13 20:27:50 2019 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond..
注意其中ping succeeded waiting until MYSQL doesn’t respond 说明整个系统已经开始监控了
关闭MHA manager 监控，忽略操作
Masterha_stop --conf=/etc/masterha/app1.cnf
发现已经将VIP:192.168.30.254 绑定在网卡ens33上
[root@server1 ~]# ip a |grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
inet 192.168.30.25/24 brd 192.168.30.255 scope global noprefixroute ens33
inet 192.168.30.254/24 brd 192.168.30.255 scope global secondary ens33:1
Master(192.168.30.25) 模拟主库故障
[root@server1 ~]# systemctl stop mariadb
[root@server1 ~]# ip a | grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
inet 192.168.30.25/24 brd 192.168.30.255 scope global noprefixroute ens33
查看slave1 (192.168.30.23)状态 已经切换到master2备用主上（192.168.30.24）
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.24
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 2472
Relay_Log_File: slave-relay-bin.000002
Relay_Log_Pos: 530
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 2472
Relay_Log_Space: 824
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 2
1 row in set (0.00 sec)
查看slave2(192.168.30.21)状态 已经切换到master2备用主上（192.168.30.24）
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.24
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 2472
Relay_Log_File: slave-relay-bin.000002
Relay_Log_Pos: 530
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 2472
Relay_Log_Space: 824
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 2
1 row in set (0.00 sec)
Server5(192.168.30.26)监控已经自动关闭
^C[1]+ 完成 nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1
Server(192.168.30.26) 查看监控配置文件已经发生了变化（server1的配置已被删除）
[root@server5 ~]# cat /etc/masterha/app1.cnf
[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/var/lib/mysql
master_ip_failover_script=/usr/local/bin/master_ip_failover
password=123456
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=repl
user=root
[server2]
candidate_master=1
check_repl_delay=0
hostname=server2
port=3306
[server3]
hostname=server3
port=3306
[server4]
hostname=server4
port=3306
Server5(192.168.30.25) 故障切换过程中的日志文件内容如下
[root@server5 ~]# tail -f /var/log/masterha/app1/manager.log
Sat Apr 13 20:59:11 2019 - [info] Checking master_ip_failover_script status:
Sat Apr 13 20:59:11 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=server2 --orig_master_ip=192.168.30.24 --orig_master_port=3306
Checking the Status of the script.. OK
Sat Apr 13 20:59:11 2019 - [info] OK.
Sat Apr 13 20:59:11 2019 - [warning] shutdown_script is not defined.
Sat Apr 13 20:59:11 2019 - [info] Set master ping interval 1 seconds.
Sat Apr 13 20:59:11 2019 - [warning] secondary_check_script is not defined. It is highly recommended setting it to check master reachability from two or more routes.
Sat Apr 13 20:59:11 2019 - [info] Starting ping health check on server2(192.168.30.24:3306)..
Sat Apr 13 20:59:11 2019 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond..
Sat Apr 13 21:00:10 2019 - [info] Got terminate signal. Exit.
故障主库修复及vip 切回测试
Master(192.168.30.25):
[root@server1 ~]# systemctl start mariadb
[root@server1 ~]# netstat -anpt |grep :3306
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 7435/mysqld
Master (192.168.30.25)指向新的主库
[root@server1 ~]# mysql -u root -p123456
Welcome to the MariaDB monitor. Commands end with ; or g.
Your MariaDB connection id is 2
Server version: 5.5.56-MariaDB MariaDB Server
Copyright (c) 2000, 2017, Oracle, MariaDB Corporation Ab and others.
Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.
MariaDB [(none)]> stop slave;
Query OK, 0 rows affected, 1 warning (0.00 sec)
MariaDB [(none)]> change master to
-> master_host='192.168.30.24',
-> master_user='repl',
-> master_password='123456';
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> start slave;
Query OK, 0 rows affected (0.12 sec)
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.24
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 2472
Relay_Log_File: mariadb-relay-bin.000004
Relay_Log_Pos: 1421
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 2472
Relay_Log_Space: 2002
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 2
1 row in set (0.00 sec)
Server5(192.168.30.26) 修改监控配置文件添加server1配置
[server1]
hostname=server1
port=3306
Server5(192.168.30.26) 检测集群状态
[root@server5 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf
Sat Apr 13 21:25:17 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sat Apr 13 21:25:17 2019 - [info] Reading application default configurations from /etc/masterha/app1.cnf..
Sat Apr 13 21:25:17 2019 - [info] Reading server configurations from /etc/masterha/app1.cnf..
Sat Apr 13 21:25:17 2019 - [info] MHA::MasterMonitor version 0.56.
Sat Apr 13 21:25:26 2019 - [info] Dead Servers:
Sat Apr 13 21:25:26 2019 - [info] Alive Servers:
Sat Apr 13 21:25:26 2019 - [info] server1(192.168.30.25:3306)
Sat Apr 13 21:25:26 2019 - [info] server2(192.168.30.24:3306)
Sat Apr 13 21:25:26 2019 - [info] server3(192.168.30.23:3306)
Sat Apr 13 21:25:26 2019 - [info] server4(192.168.30.21:3306)
Sat Apr 13 21:25:26 2019 - [info] Alive Slaves:
Sat Apr 13 21:25:26 2019 - [info] server1(192.168.30.25:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:25:26 2019 - [info] Replicating from 192.168.30.24(192.168.30.24:3306)
Sat Apr 13 21:25:26 2019 - [info] server3(192.168.30.23:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:25:26 2019 - [info] Replicating from 192.168.30.24(192.168.30.24:3306)
Sat Apr 13 21:25:26 2019 - [info] server4(192.168.30.21:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:25:26 2019 - [info] Replicating from 192.168.30.24(192.168.30.24:3306)
Sat Apr 13 21:25:26 2019 - [info] Current Alive Master: server2(192.168.30.24:3306)
Sat Apr 13 21:25:26 2019 - [info] Checking slave configurations..
Sat Apr 13 21:25:26 2019 - [info] read_only=1 is not set on slave server1(192.168.30.25:3306).
Sat Apr 13 21:25:26 2019 - [warning] relay_log_purge=0 is not set on slave server1(192.168.30.25:3306).
Sat Apr 13 21:25:26 2019 - [warning] relay_log_purge=0 is not set on slave server3(192.168.30.23:3306).
Sat Apr 13 21:25:26 2019 - [warning] relay_log_purge=0 is not set on slave server4(192.168.30.21:3306).
Sat Apr 13 21:25:26 2019 - [info] Checking replication filtering settings..
Sat Apr 13 21:25:26 2019 - [info] binlog_do_db= , binlog_ignore_db=
Sat Apr 13 21:25:26 2019 - [info] Replication filtering check ok.
Sat Apr 13 21:25:26 2019 - [info] Starting SSH connection tests..
Sat Apr 13 21:25:31 2019 - [info] All SSH connection tests passed successfully.
Sat Apr 13 21:25:31 2019 - [info] Checking MHA Node version..
Sat Apr 13 21:25:32 2019 - [info] Version check ok.
Sat Apr 13 21:25:32 2019 - [info] Checking SSH publickey authentication settings on the current master..
Sat Apr 13 21:25:32 2019 - [info] HealthCheck: SSH to server2 is reachable.
Sat Apr 13 21:25:33 2019 - [info] Master MHA Node version is 0.56.
Sat Apr 13 21:25:33 2019 - [info] Checking recovery script configurations on the current master..
Sat Apr 13 21:25:33 2019 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/var/lib/mysql --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=master-bin.000003
Sat Apr 13 21:25:33 2019 - [info] Connecting to root@server2(server2)..
Creating /tmp if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /var/lib/mysql, up to master-bin.000003
Sat Apr 13 21:25:33 2019 - [info] Master setting check done.
Sat Apr 13 21:25:33 2019 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Sat Apr 13 21:25:33 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server1 --slave_ip=192.168.30.25 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:25:33 2019 - [info] Connecting to root@192.168.30.25(server1:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to mariadb-relay-bin.000004
Temporary relay log file is /var/lib/mysql/mariadb-relay-bin.000004
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:25:34 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server3 --slave_ip=192.168.30.23 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:25:34 2019 - [info] Connecting to root@192.168.30.23(server3:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:25:34 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server4 --slave_ip=192.168.30.21 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:25:34 2019 - [info] Connecting to root@192.168.30.21(server4:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:25:35 2019 - [info] Slaves settings check done.
Sat Apr 13 21:25:35 2019 - [info]
server2 (current master)
+--server1
+--server3
+--server4
Sat Apr 13 21:25:35 2019 - [info] Checking replication health on server1..
Sat Apr 13 21:25:35 2019 - [info] ok.
Sat Apr 13 21:25:35 2019 - [info] Checking replication health on server3..
Sat Apr 13 21:25:35 2019 - [info] ok.
Sat Apr 13 21:25:35 2019 - [info] Checking replication health on server4..
Sat Apr 13 21:25:35 2019 - [info] ok.
Sat Apr 13 21:25:35 2019 - [info] Checking master_ip_failover_script status:
Sat Apr 13 21:25:35 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=server2 --orig_master_ip=192.168.30.24 --orig_master_port=3306
Checking the Status of the script.. OK
Sat Apr 13 21:25:35 2019 - [info] OK.
Sat Apr 13 21:25:35 2019 - [warning] shutdown_script is not defined.
Sat Apr 13 21:25:35 2019 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
Server5(192.168.30.26) 开启监控
[root@server5 ~]# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover< /dev/null > /var/log/masterha/app1/manager.log 2>&1&
[2] 14177
Master(192.168.30.24) 关闭现在主库mysql
[root@server2 ~]# systemctl stop mariadb
[root@server2 ~]# netstat -anpt |grep :3306
Master（192.168.30.21) 发现关了第二个master，vip就会自动分配到原来的master1上
[root@server1 ~]# ip a |grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
inet 192.168.30.25/24 brd 192.168.30.255 scope global noprefixroute ens33
inet 192.168.30.254/24 brd 192.168.30.255 scope global secondary ens33:1
Slave 1(192.168.30.23)状态
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.25
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 1807
Relay_Log_File: slave-relay-bin.000002
Relay_Log_Pos: 530
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 1807
Relay_Log_Space: 824
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 1
1 row in set (0.00 sec)
Slave2（192.168.30.24）状态
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.25
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 1807
Relay_Log_File: slave-relay-bin.000002
Relay_Log_Pos: 530
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 1807
Relay_Log_Space: 824
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 1
1 row in set (0.00 sec)
Server5 （192.168.30.26）配置文件变化，（已经移除故障件server2配置）
[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/var/lib/mysql
master_ip_failover_script=/usr/local/bin/master_ip_failover
password=123456
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=repl
user=root
[server1]
hostname=server1
port=3306
[server3]
hostname=server3
port=3306
[server4]
hostname=server4
port=3306
Server5(192.168.30.25)监控日志
[root@server5 ~]# tail -f /var/log/masterha/app1/manager.log
Selected server1 as a new master.
server1: OK: Applying all logs succeeded.
server1: OK: Activated master IP address.
server3: This host has the latest relay log events.
server4: This host has the latest relay log events.
Generating relay diff files from the latest slave succeeded.
server4: OK: Applying all logs succeeded. Slave started, replicating from server1.
server3: OK: Applying all logs succeeded. Slave started, replicating from server1.
server1: Resetting slave info succeeded.
Master failover to server1(192.168.30.25:3306) completed successfully.
修复master(192.168.30.24)主机
[root@server2 ~]# systemctl start mariadb
[root@server2 ~]# netstat -anpt |grep :3306
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 8451/mysqld
Master(192.1968.30.24)指向新的主库
[root@server2 ~]# mysql -u root -p123456
MariaDB [(none)]> stop slave;
Query OK, 0 rows affected, 1 warning (0.00 sec)
MariaDB [(none)]> change master to
-> master_host='192.168.30.25',
-> master_user='repl',
-> master_password='123456';
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> start slave;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.30.25
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000003
Read_Master_Log_Pos: 1807
Relay_Log_File: mariadb-relay-bin.000004
Relay_Log_Pos: 530
Relay_Master_Log_File: master-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 1807
Relay_Log_Space: 2447
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 1
Server5(192.168.30.26)修改监控配置文件添加server2配置
[server2]
hostname=server2
candidate_master=1
port=3306
check_repl_delay=0
Server5(192.168.30.26) 检查集群状态
[root@server5 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf
Sat Apr 13 21:51:01 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sat Apr 13 21:51:01 2019 - [info] Reading application default configurations from /etc/masterha/app1.cnf..
Sat Apr 13 21:51:01 2019 - [info] Reading server configurations from /etc/masterha/app1.cnf..
Sat Apr 13 21:51:01 2019 - [info] MHA::MasterMonitor version 0.56.
Sat Apr 13 21:51:02 2019 - [info] Dead Servers:
Sat Apr 13 21:51:02 2019 - [info] Alive Servers:
Sat Apr 13 21:51:02 2019 - [info] server1(192.168.30.25:3306)
Sat Apr 13 21:51:02 2019 - [info] server2(192.168.30.24:3306)
Sat Apr 13 21:51:02 2019 - [info] server3(192.168.30.23:3306)
Sat Apr 13 21:51:02 2019 - [info] server4(192.168.30.21:3306)
Sat Apr 13 21:51:02 2019 - [info] Alive Slaves:
Sat Apr 13 21:51:02 2019 - [info] server2(192.168.30.24:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:51:02 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 21:51:02 2019 - [info] Primary candidate for the new Master (candidate_master is set)
Sat Apr 13 21:51:02 2019 - [info] server3(192.168.30.23:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:51:02 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 21:51:02 2019 - [info] server4(192.168.30.21:3306) Version=5.5.56-MariaDB (oldest major version between slaves) log-bin:enabled
Sat Apr 13 21:51:02 2019 - [info] Replicating from 192.168.30.25(192.168.30.25:3306)
Sat Apr 13 21:51:02 2019 - [info] Current Alive Master: server1(192.168.30.25:3306)
Sat Apr 13 21:51:02 2019 - [info] Checking slave configurations..
Sat Apr 13 21:51:02 2019 - [info] read_only=1 is not set on slave server2(192.168.30.24:3306).
Sat Apr 13 21:51:02 2019 - [warning] relay_log_purge=0 is not set on slave server2(192.168.30.24:3306).
Sat Apr 13 21:51:02 2019 - [warning] relay_log_purge=0 is not set on slave server3(192.168.30.23:3306).
Sat Apr 13 21:51:02 2019 - [warning] relay_log_purge=0 is not set on slave server4(192.168.30.21:3306).
Sat Apr 13 21:51:02 2019 - [info] Checking replication filtering settings..
Sat Apr 13 21:51:02 2019 - [info] binlog_do_db= , binlog_ignore_db=
Sat Apr 13 21:51:02 2019 - [info] Replication filtering check ok.
Sat Apr 13 21:51:02 2019 - [info] Starting SSH connection tests..
Sat Apr 13 21:51:10 2019 - [info] All SSH connection tests passed successfully.
Sat Apr 13 21:51:10 2019 - [info] Checking MHA Node version..
Sat Apr 13 21:51:12 2019 - [info] Version check ok.
Sat Apr 13 21:51:12 2019 - [info] Checking SSH publickey authentication settings on the current master..
Sat Apr 13 21:51:13 2019 - [info] HealthCheck: SSH to server1 is reachable.
Sat Apr 13 21:51:13 2019 - [info] Master MHA Node version is 0.56.
Sat Apr 13 21:51:13 2019 - [info] Checking recovery script configurations on the current master..
Sat Apr 13 21:51:13 2019 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/var/lib/mysql --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=master-bin.000003
Sat Apr 13 21:51:13 2019 - [info] Connecting to root@server1(server1)..
Creating /tmp if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /var/lib/mysql, up to master-bin.000003
Sat Apr 13 21:51:13 2019 - [info] Master setting check done.
Sat Apr 13 21:51:13 2019 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Sat Apr 13 21:51:13 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server2 --slave_ip=192.168.30.24 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:51:13 2019 - [info] Connecting to root@192.168.30.24(server2:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to mariadb-relay-bin.000004
Temporary relay log file is /var/lib/mysql/mariadb-relay-bin.000004
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:51:14 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server3 --slave_ip=192.168.30.23 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:51:14 2019 - [info] Connecting to root@192.168.30.23(server3:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:51:14 2019 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=server4 --slave_ip=192.168.30.21 --slave_port=3306 --workdir=/tmp --target_version=5.5.56-MariaDB --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info --relay_dir=/var/lib/mysql/ --slave_pass=xxx
Sat Apr 13 21:51:14 2019 - [info] Connecting to root@192.168.30.21(server4:22)..
Checking slave recovery environment settings..
Opening /var/lib/mysql/relay-log.info ... ok.
Relay log found at /var/lib/mysql, up to slave-relay-bin.000002
Temporary relay log file is /var/lib/mysql/slave-relay-bin.000002
Testing mysql connection and privileges.. done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Sat Apr 13 21:51:15 2019 - [info] Slaves settings check done.
Sat Apr 13 21:51:15 2019 - [info]
server1 (current master)
+--server2
+--server3
+--server4
Sat Apr 13 21:51:15 2019 - [info] Checking replication health on server2..
Sat Apr 13 21:51:15 2019 - [info] ok.
Sat Apr 13 21:51:15 2019 - [info] Checking replication health on server3..
Sat Apr 13 21:51:15 2019 - [info] ok.
Sat Apr 13 21:51:15 2019 - [info] Checking replication health on server4..
Sat Apr 13 21:51:15 2019 - [info] ok.
Sat Apr 13 21:51:15 2019 - [info] Checking master_ip_failover_script status:
Sat Apr 13 21:51:15 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=server1 --orig_master_ip=192.168.30.25 --orig_master_port=3306
Checking the Status of the script.. OK
Sat Apr 13 21:51:15 2019 - [info] OK.
Sat Apr 13 21:51:15 2019 - [warning] shutdown_script is not defined.
Sat Apr 13 21:51:15 2019 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
实验完成