• Linux 添加虚拟网卡


    使用的Linux版本是Centos 7:

    [root@vnode33 bin]# cat /etc/redhat-release
    CentOS Linux release 7.2.1511 (Core)

    使用ifconfig命令查看当前可用的网卡有eth1:

    [root@vnode33 network-scripts]# ifconfig
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 172.86.40.129  netmask 255.255.255.0  broadcast 172.86.40.255
            inet6 fe80::5054:ff:fe19:6363  prefixlen 64  scopeid 0x20<link>
            ether 52:54:00:19:63:63  txqueuelen 1000  (Ethernet)
            RX packets 79292  bytes 5128248 (4.8 MiB)
            RX errors 0  dropped 22  overruns 0  frame 0
            TX packets 668  bytes 128859 (125.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    进入目录 [root@vnode33 sysconfig]# cd /etc/sysconfig/network-scripts/ 查看eth1的配置:

    [root@vnode33 network-scripts]# cat ifcfg-eth1
    TYPE=Ethernet
    BOOTPROTO=static
    DEFROUTE=no
    IPV4_FAILURE_FATAL=no
    IPV6INIT=yes
    IPV6_AUTOCONF=yes
    IPV6_DEFROUTE=yes
    IPV6_FAILURE_FATAL=no
    NAME=eth1
    UUID=575fa71d-1ba7-468e-bd3c-2a6a5f379a78
    DEVICE=eth1
    ONBOOT=yes
    IPADDR=172.86.40.129
    PREFIX=24
    GATEWAY=172.86.40.254
    IPV6_PEERDNS=yes
    IPV6_PEERROUTES=yes
    IPV6_PRIVACY=no

    复制该文件并修改红色标注的三行: cp ifcfg-eth1 ifcfg-eth1:1 

    TYPE=Ethernet
    BOOTPROTO=static
    DEFROUTE=no
    IPV4_FAILURE_FATAL=no
    IPV6INIT=yes
    IPV6_AUTOCONF=yes
    IPV6_DEFROUTE=yes
    IPV6_FAILURE_FATAL=no
    NAME=eth1:1
    UUID=575fa71d-1ba7-468e-bd3c-2a6a5f379a78
    DEVICE=eth1:1
    ONBOOT=yes
    IPADDR=172.86.40.130
    PREFIX=24
    GATEWAY=172.86.40.254
    IPV6_PEERDNS=yes
    IPV6_PEERROUTES=yes
    IPV6_PRIVACY=no

    最后重启系统网络服务:  service network restart 

    我们再次查看接口,可以看见虚拟网卡已经启动了:

    [root@vnode33 network-scripts]# ifconfig
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 172.86.40.129  netmask 255.255.255.0  broadcast 172.86.40.255
            inet6 fe80::5054:ff:fe19:6363  prefixlen 64  scopeid 0x20<link>
            ether 52:54:00:19:63:63  txqueuelen 1000  (Ethernet)
            RX packets 80006  bytes 5177274 (4.9 MiB)
            RX errors 0  dropped 22  overruns 0  frame 0
            TX packets 799  bytes 142765 (139.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 172.86.40.130  netmask 255.255.255.0  broadcast 172.86.40.255
            ether 52:54:00:19:63:63  txqueuelen 1000  (Ethernet)
  • 相关阅读:
    k8s中service 的iptables
    xbak 备份
    tcp/ip 拥塞控制、重传、丢包、优化
    mysql 主从详细原理 以及prom 监控的对象
    内核参数优化limit.conf与sysctl.conf
    k8s 中(生产|测试)环境隔离问题
    mysql锁以及配置优化
    mysql5.6迁移mysql5.7(生产中、短中断)
    mysql 日志方面与备份、恢复
    Apollo&&Eureka安装配置
  • 原文地址:https://www.cnblogs.com/z-joshua/p/6377566.html
Copyright © 2020-2023  润新知