• [非官方]ArcGIS10.2 for Desktop扩展工具包——XTools Pro


    XTools Pro 套为ArcGIS平台设计的矢量空间分析 形状转换管理扩展工具大大增强了 ArcGIS功能使用该工具能够提高 ArcGIS 用户效率性能

    XTools Pro 包括矢量空间分析 形状转换 管理70 工具超过 40 地理处理工具一个单一工具栏 ArcGIS 用户收集基本功能实用工具有助于节省时间和提高工作效率!

    该工具相当于把ArcGIS Desktop平台软件更加的实用化,业务化,更贴合用户的应用,非常多相似的功能可能须要用户自行使用AddIn或者Python开发,如今仅仅须要使用该工具就可以。

    该工具是一个收费的工具,可是ArcGIS用户能够有限试用。

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    完成下载之后,安装软件,相当于ArcGIS 10.2 for Desktop的一个工具条

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    里面的工具非常多,还包括一个工具条,和相关工具。

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    我就举几个典型的样例
    1:使用go google map能够直接将ArcMap的数据,在Google Map中进行定位显示。
    2:Show Nodes直接显示全部数据的节点

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    3:SHow Directions 显示全部数据的方向

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    4:显示要素信息

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    5:将选中的要素直接在pagelayout视图中显示

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    6:查看元数据

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    7:MXD信息

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    8:帮助文档


    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    很多其它工具列表能够參考例如以下信息:

    Major part of XTools Pro tools can be used in ArcGIS Geoprocessing environment, i.e. they can be run from ArcToolbox or used in the models and scripts.

    Feature Conversions toolset includes:
    • - Convert Features to Centroids
    • - Convert Features to Points
    • - Convert Features to Equidistant Points
        (Fixed Number)
    • - Convert Features to Equidistant Points
        (Fixed Interval)
    • - Convert Multipart Shapes to Single Parts
    • - Convert Polygons to Polylines
    • - Make Polygons from Points
    • - Make Polygons from Polylines
    • - Make Polylines from Points
    • - Smooth Polylines
    • - Split Layer by Attributes
    • - Split Polygons
    • - Split Polylines
    • - Transfer/Convert Features

    Overlay Operations toolset includes:
    • - Create Intersection Points
    • - Erase Features
    • - Identity
    • - Update Polygon Layer

    Table Operations toolset includes:
    • - Add X, Y, Z Coordinates
    • - Add X, Y, Z Coordinates Batch
    • - Calculate Area
    • - Calculate Area Batch
    • - Calculate Length
    • - Calculate Length Batch
    • - Delete Multiple Fields
    • - Export Table to HTML
    • - Export Table to Text
    • - Find Duplicates

    Data Management toolset includes:
    • - Convex Hull
    • - Convex Hull Multiple
    • - Create Personal GDB
    • - Create Random Sampling Points
    • - Create File GDB
    • - Export Data to KML
    • - Import Data to KML

    Surface Tools toolset:
    • - Build Thiessen Polygons
    • - Convert Grid to Contour
    • - Create Grid from Contours
    • - Create Grid from Points
    • - Extract Raster Values
    • - Extract Raster Zonal Statistics

    Data Management tools:


    Create FeatureClass/Table

    allows creating new feature classes and stand-alone tables in ArcMap without using ArcCatalog. Resulting feature classes can be stored as shapefiles or personal geodatabase feature classes (new personal geodatabase can be created by this tool if required). While creating new layers, any structure of attribute table can be designed, and any properties can be specified for attribute and shape fields.

    Create File Geodatabase 

    the tool is provided for creating new file geodatabases directly in ArcGIS ArcMap without using ArcCatalog.

    Create Personal Geodatabase 

    this tool is provided for creating new empty personal geodatabases directly in ArcGIS ArcMap without using ArcCatalog. The tool functionality is similar to ArcGIS ArcCatalog "Create new personal geodatabase" functionality.

    Delete Dataset 

    this tool is aimed to deleting of ArcGIS datasets directly in ArcGIS ArcMap without using ArcCatalog. The tool functionality is similar to ArcGIS ArcCatalog "Delete" functionality. Any of the datasets supported by ArcGIS can be deleted using "Delete Dataset" tool.

    Change Datasources

    allows fixing broken or changed links to data sources in the map documents.

    Create Random Sampling Points

    creates new randomly spread sampling points, various constraining conditions can be applied.

    MultiRename Datasets

    renames multiple datasets at once using various advanced and flexible renaming masks and options.

    Feature Conversions:


    Transfer/Convert Features 

    provides an easy way to copy selected spatial features from one layer and paste them into another layer. This command cannot be used to build features that are more complex than the source features. This means that you cannot use this command to build Polylines from Points, Polygons from Polylines or Points, etc. Such operations are beyond the scope of this command.

    Convert Multipart Shapes to Single Parts 

    converts selected multipart shapes to single part shapes and stores them in a new shapefile. If no shapes are currently selected, all shapes in layer will be processed. Source shapes can be single part, multi-part or mixed in the layer. The output shapefile attribute table will contain the same fields as the input layer attribute table.
    This tool requires that there is at least one feature layer in the Data Frame.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Convert Polygons to Polylines 

    converts selected polygons to single part polylines and stores them in a new shapefile. If no polygons are currently selected, all polygons in the layer are processed. Source polygons can be single part, multi-part or mixed in the layer. The output polyline attribute table will contain the same fields as one of the input polygons.

    Convert Features to Points 

    provides ArcGIS users with capabilities to convert polygon and polyline features to points with customizable options.

    Make Polygons from Polylines 

    converts selected polyline features of a layer into single part polygon(s), and stores them a new shapefile. If no polylines are currently selected, all the polylines in the layer will be processed. The polylines do not need to be snapped together. Gaps between polylines will be bridged with a straight line. Source polylines can be single part, multi-part or mixed in the layer. Neither the order of the polylines in the Feature Table, nor the order in which the polylines are selected is important.

    If polylines from more than one layer will be used to build the polygon, the user will need to assemble the necessary polylines in a separate layer before running this command. A common example of this situation is the necessity to build a polygon from lines borrowed from PLS, Roads, Streams ... layers. If there are gaps between the source polylines that should not be bridged with a straight line, the user should digitize in polylines to fill the gaps prior to running the command. This command differs from the ArcInfo Build command (polygon option) in that only one polygon can be built in a single operation.

    Make Polygons from Points 

    converts point features of a point layer to single part polygon(s) and stores them in a new shapefile or personal geodatabase feature class.

    This command differs from the Arc/INFO Build command (polygon option) in that only one polygon can be built in a single operation. Also, no intersecting or cleaning is done, so the user must do the equivalent preparatory work (if necessary) prior to using the command in order to get the appropriate results.
    Note: Multipoint layers are not supported in this tool!

    Make Polylines from Points 

    converts a point layer to polyline(s), and stores them in a new shapefile or personal geodatabase feature class.

    This command differs from the Arc/INFO Build command (arc option) in that only one line can be built in a single operation. Also, no intersecting or cleaning is done, so the user must do the equivalent preparatory work (if necessary) in advance of using the command in order to get the desired results.

    Convert Graphics to Shapes 

    creates one shapefile for each user-selected shape type (graphics) in the ArcMap Data View. Rectangle, circle and polygon graphics are converted to polygon shapes. Line and polyline graphics are converted to polyline shapes. Point graphics are converted to point shapes.

    Shapes to Centroids 

    creates a new point shape file from the center points (centroids) of the shapes in the input shapefile. A centroid of a shape is the spatial location of its "center of mass". Attribute fields in the input layer are transferred to the output shapefile.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Split Polylines

    provides ArcGIS users with capabilities to split polyline features into separate segments in various customizable ways.

    Split Polygons

    provides capabilities for advanced splitting of polygon features.

    Smooth Polylines 

    smoothes input polyline features using Bezier or B-splines.

    Split Layer by Attributes

    splits layers into separate datasets by one or more attributes.

    Find Multipart Features

    allows searching for multipart features and optionally selecting found multipart features, zooming to them or adding number of parts to the attribute table.

    Layer Operations:


    Create Intersection Points

    creates intersection points (polyline and polygon layers supported).

    Erase Features 

    creates a new layer by overlaying two feature layers. The polygons of the erase layer define the erasing region. Input layer features that are within the erasing region are removed. The output layer contains only those input layer features that are outside the erasing region.
    Input layer features can be polygons, polylines, multipoints or points; erase layer features must be polygons. The output layer features are of the same class as the input layer features. They are clipped to the outer boundary of the erase layer polygons. The attribute table for the output layer contains the same items as the input layer feature attribute table.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Identity 

    creates a new layer by overlaying two feature layers.
    The output layer contains all of the input layer features, and only those portions of the overlay layer features that overlap the input layer. The input layer features can be points, polylines, or polygons. The overlay layer features must be polygons. The output layer features resulting from the overlay are of the same class as the input layer features. The feature tables are also updated. The feature table for the output layer contains all the selected fields from the input and overlay layer feature tables. Selecting only the fields that you need in the output significantly speeds up processing.

    Update Polygon Layer 

    creates a new layer by overlaying two feature layers. The features of the overlay layer define the updating extent. UPDATE uses the updating extent in a "cut-and-paste" operation; the overlay layer features replace the area they overlap in the input layer. The result is stored in the output layer. Both the input and overlay layers must be polygons.
    UPDATE is one of the three overlay operations available in XTools Pro. ERASE is similar to UPDATE, except that the input layer features which overlap the updating extent are erased instead of updated. ERASE can also be used with polyline and point features.

    Table Operations:


    Calculate Geometry 

    calculates perimeter and area values (including hectares and acres units) for polygon layers and length for polyline layers.
    After some calculation corresponding fields will be added to the attribute table of the selected layer and populated with values. If such fields already exist in the attribute table, their values can be recalculated and rewritten in the table.

    The "Calculate" tool allows:
    - choosing a polygon or polyline layer to be measured
    - changing projection in which the output parameters values will be calculated
    - specifying attributes that are to be calculated: length for polyline features; perimeter, area, acres, hectares for polygon features
    naming the attributes to be calculated

    Note: The functionality of this tool is only available if there is at least one polygon or polyline layer added in the TOC window.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Add X, Y, Z Coordinates 

    adds X, Y, and Z coordinates to attribute tables of point, polyline and polygon layers.
    At that there are options to add Z coordinate for 3D shapes only, specify required coordinate system for output coordinates, and convert angular coordinate units to DMS format.

    For point layers this tool adds X orand Y orand Z coordinates for all features to the attribute table of this layer.
    For polygon layers this tool adds X_Centroid orand Y_ Centroid orand Z_ Centroid coordinates for all features to the attribute table of this layer.
    For polyline layers this tool adds X orand Y orand Z coordinates of the user-defined polyline point for all features to the attribute table of the layer. For polylines coordinates of the FROM, TO, or Center point can be added.Z (or Z_ Centroid) coordinate can be added for 3D shapes only if the corresponding option is selected.

    Aggregate Features/Records

    with this tool the user can aggregate features and records on the basis of specified Group By field(s). Various options for the output aggregation geometry type and aggregation function are provided. Results can be stored as a new shapefile, personal geodatabase feature class, stand-alone table or just viewed in ArcMap without saving.

    Table Restructure

    any kind of modifications can be performed for attribute tables with "Table Restructure" tool. That is, the user can add, move, or remove attribute fields and change their properties. For string fields capitalization can be modified. Results can be stored as a new shapefile, personal geodatabase feature class or stand-alone table (if no shape field is presented). The coordinate system can be modified as well. Besides, there are options for concatenating tables and building spatial indexes for shapefiles.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Export Table to MS Excel 

    allows exporting an attribute table into MS Excel application.
    This tool starts Excel, creates a "link" between ArcMap and Excel, and copies specified fields and selected rows from an ArcMap Table to an Excel spreadsheet.
    In the current version it is possible to save string fields' format during the transferring to Excel. It means that if you have formatted numbers as string values, they will not be automatically converted to Excel number cells. Their formatting will be saved. Exporting to to .xlsx files is also supported.

    MultiDelete Fields 

    allows deleting multiple attribute fields at a time. This tool gives the user a list of fields to select from and then deletes the selected fields.
    WARNING: this command acts directly on the active table, not on a copy. A delete confirmation routine is included, but once confirmed all deletion requests are final.

    Table Statistics 

    analyses a feature table and calculates statistics for each numeric field. The resulting information is written to a new table created by the tool.
    For every field, the table contains the following information: field name, alias, type, width, decimals, whether or not it is editable and visible.
    For numeric fields, the table contains the following statistics: sum, count, mean, min, max, range, variance, and standard deviation.

    Export Table to Text 

    this tool allows exporting attribute tables or standalone tables to CSV text files. At that, it is possible to export only selected fields and rows of the table. Exported fields in the resulting text file are delimited with comma.

    Export Table to HTML

    exports attribute tables to HTML format.

    Find Duplicates

    allows finding and indexing duplicated features/records in feature classes/tables.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Sort Features/Records 

    allows sorting of features/records in feature classes/tables; sorted output is written to a new feature class/table.

    Edit with MS Excel

    allows editing tables in ArcGIS with Microsoft Excel.

    Import Edits from MS Excel

    imports edits made in Excel back to ArcMap, requires open edit session for the edited layer/table.

    Surface Tools:


    Create Grid from Contours
    Convert Grid to Contour

    these two surface tools allow to generate contour polylines from specified grids and vice versa without using ArcGIS 3D Analyst or Spatial Analyst. Grid output format can be ESRI GRID, TIFF, or ERDAS IMAGINE.

    Create Grid from Points

    interpolates Grids from input points using spline algorithms.

    Extract Raster Values

    extracts raster (e.g. DEM GRIDs) values to points attributes.

    Build Thiessen Polygons

    creates Thiessen polygons from input points.

    Extract Raster Zonal Statistics

    extracts statistics from rasters at the selected polygon zones.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Go To tools:


    Go to Google Maps

    allows viewing current ArcGIS map location in Google Maps online.

    Go to Google Earth

    allows viewing current ArcGIS map location in Google Earth.

    Go to Microsoft Bing Maps

    allows viewing current ArcGIS map location in Microsoft Bing Maps online.

    Go to ArcGIS Exlporer

    allows viewing current ArcGIS map location in ArcGIS Explorer application.

    Go to OpenStreetMap

    allows viewing current ArcGIS map location in the OpenStreetMap online service.

    Miscellaneous general usage tools:


    Open Attribute Table button 

    this button provides prompt and convenient access to the attribute table of a selected layer. Being placed on the XTools Pro toolbar, the button allows opening the attribute table with just one click, which is very habitual for all the ArcView GIS 3.x users.

    Attribute Table Views

    provide extended and enriched attribute table windows in ArcMap.

    Smart Add Data

    alternative dialog for adding data in ArcMap. In addition to the standard Add Data dialog it allows to filter datasets by datasets name, type, format, geometry type etc., allows to prescribe a number of tasks for the selected dataset and adds a virtual Recent Datasets folder.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Show Nodes 

    this simple but effective tool will show you all the nodes and vertices in your layers with just one click. Nodes are represented as graphics and can be removed by refreshing data view or any operation that causes re-drawing in the data view.

    Convex Hull 

    with this tool the user can build convex or detailed hulls either for point, polyline, and polygon layers or for selected features in the layers. As an option hulls can be built for feature groups defined by specified attribute field. Besides buffers can be defined for resulting hulls.

    Extract Map

    this revolutionary tool provides ArcGIS users with capabilities to extract any area of the map. Extracted map preserves all the rendering and classification properties and can be stored either in personal geodatabase format or as shapefiles. Extraction boundaries can be defined in many different ways: by current extent, by selected polygon feature in a layer, or by user specified graphics. Tool options include creating shapefile spatial indexes and enabling/disabling clipping features in the process of extraction.

    Create Fishnet

    allows to create fishnet feature classes. Created fishnets can be stored as polygons or polylines.

    Identify Pro

    in addition to standard ArcMap Identify functionality XTools Pro Identify Pro tool allows to edit attributes and view field types and geometry properties of the identified features.

    Feature Report

    allows creating reports on the selected feature(s). Feature reports display feature geometry and include attribute and geometry information derived from the selected feature(s). Created reports can be modified, printed or exported to MS Word application for editing or distribution purposes. This is an additional alternate way for creating reports in ArcGIS.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------

    Start Editing Selected Layer 

    this button provides prompt and convenient way to start edit session for the selected layer. Having this button on the XTools Pro toolbar you are just one click away from starting editing your data.

    Show Directions 

    this tool is provided for displaying directions of polyline and polygon features. Directions are displayed with arrow graphic objects and are fixed in the map until switched off.

    Export Data to KML

    converts data from ArcGIS to KML/KMZ format for use with Google Earth, for example.

    Find Associated Documents and Datasets

    allows to search for map documents associated with the selected dataset or datasets used in the selected map document.

    Auto Save MXD

    auto saves backup copies of .mxd map documents.

    Callout Identify

    allows flexible identifying features and creating advanced feature callouts.

    Import Data from KML

    allows importing data from KML/KMZ files to ArcGIS.

    Catalog Tab and Dockable Window in ArcMap

    allow seamless work with spatial data in ArcMap without switching to ArcCatalog.

    XTools Pro Navigator

    allows to access applicable tools and manage list of your favorite tools and features.

    Edit Metadata

    allows editing metadata in ArcMap.

    Batch Metadata Editing

    edits metadata for a few selected datasets in a batch mode.

    View Metadata

    allows viewing metadata in ArcMap

    Synchronize Metadata

    allows synchronizing metadata with the actual data.

    MXD Info

    allows viewing information about MXD documents, save information in TXT or HTML format, and defragmenting MXD documents, if required.

    Multiple Layouts Manager

    allows creating and using multiple map layouts in ArcMap in one MXD document.

    ----------------------------------------------------------------------------------

    版权全部,文章同意转载,但必须以链接方式注明源地址,否则追究法律责任!

    Blog:               http://blog.csdn.net/linghe301

    ----------------------------------------------------------------------------------


    Copy Properties

    allows to effectively copy the selected layer properties from one layer to another layer, or to a few other layers. At that, for the Copy part there are three options provided for selection:
    • Copy properties...
      - this option provides a dialog allowing to select what properties you wish to copy
    • Copy symbology
      - this option allows to fast copy symbology
    • Copy labels
      - this option allows to fast copy labels

    Paste Properties

    pastes copied layer properties to the selected layer.

    Definition Query Manager

    allows for more efficient work with definition queries in ArcMap, supports multiple definition queries added to one layer, turns selections to definition queries.

    Customize XTools Pro Components

    allows to set or change default options and parameters for XTools Pro tools and commands.

    XTools Pro Help

    help system for XTools Pro tools and features. The Help file is installed with XTools Pro and does not require an Internet connection.

    About XTools Pro

    provides details about XTools Pro version and registration information.

  • 相关阅读:
    MYSQL查询和插入数据的流程是怎样的
    Nacos服务心跳和健康检查源码介绍
    Nacos使用和注册部分源码介绍
    实用程序包utils
    SOLID原则
    前端实用程序包utils
    实现 strStr()
    记一次华为机试
    十分钟入门 Python 教程
    字符串转换整数 (atoi)
  • 原文地址:https://www.cnblogs.com/yxwkf/p/4084087.html
Copyright © 2020-2023  润新知