• 《 UNIX网络编程》源码的使用


    学习编程这东西,看代码,改代码,运行代码这样才能学到实际东西!本书说在www.unpbook.com可以获取源码,不过打不开!所以google

    unpv13e.tar.gz

    并在网络上找到了:源码:http://code.google.com/p/stid/downloads/detail?name=unpv13e.tar.gz&can=2&q=

    现在就是使用的问题了!

    关于在windows下的问题

    既然是unix网络编程,直接在windows下运行当然是行不通的!(问:那还学这个干嘛!?? 你说呢,我们学的是思想和方法,window网络编程其实差异不大)

    不过在windows下装个UNIX模拟器cygwin貌似是一个不错的选择!也有人用这个模拟器搭建UNIX网络编程平台,不过对初学者有一定难度!(cygwin是个好东西呀!)

    关于在Linux 下的使用问题

    Linux也是UNIX,当然没问题!现在说明如何使用书本源码unpv13e.tar.gz问题。

    首先,解压源码,这里是解压到当前目录:acer@ubuntu:~$ tar -xvf unpv13e.tar.gz

    其后,建议去阅读解压后目录unpv13e下的README文档!

    README文档内容如下:(ubuntu下执行红色部分即可)

    QUICK AND DIRTY
    ===============
    
    Execute the following from the src/ directory:
    
        ./configure    # try to figure out all implementation differences
    
        cd lib         # build the basic library that all programs need
        make           # use "gmake" everywhere on BSD/OS systems
    
        cd ../libfree  # continue building the basic library
        make
    
        cd ../libroute # only if your system supports 4.4BSD style routing sockets
        make           # only if your system supports 4.4BSD style routing sockets
    
        cd ../libxti   # only if your system supports XTI
        make           # only if your system supports XTI
    
        cd ../intro    # build and test a basic client program
        make daytimetcpcli
        ./daytimetcpcli 127.0.0.1
    
    If all that works, you're all set to start compiling individual programs.
    
    Notice that all the source code assumes tabs every 4 columns, not 8.
    
    MORE DETAILS
    ============
    
    5.  If you need to make any changes to the "unp.h" header, notice that it
        is a hard link in each directory, so you only need to change it once.
    
    6.  Go into the "lib/" directory and type "make".  This builds the library
        "libunp.a" that is required by almost all of the programs.  There may
        be compiler warnings (see NOTES below).  This step is where you'll find
        all of your system's dependencies, and you must just update your cf/
        files from step 1, rerun "config" and do this step again.
    
    6.  Go into the "libfree/" directory and type "make".  This adds to the
        "libunp.a" library.  The files in this directory do not #include
        the "unp.h" header, as people may want to use these functions
        independent of the book's examples.
    
    8.  Once the library is made from steps 5 and 6, you can then go into any
        of the source code directories and make whatever program you are
        interested in.  Note that the horizontal rules at the beginning and
        end of each program listing in the book contain the directory name and
        filename.
    
        BEWARE: Not all programs in each directory will compile on all systems
        (e.g., the file src/advio/recvfromflags.c will not compile unless your
        system supports the IP_RECVDSTADDR socket option).  Also, not all files
        in each directory are included in the book.  Beware of any files with
        "test" in the filename: they are probably a quick test program that I
        wrote to check something, and may or may not work.
    
    NOTES
    -----
    
    - Many systems do not have correct function prototypes for the socket
      functions, and this can cause many warnings during compilation.
      For example, Solaris 2.5 omits the "const" from the 2nd argument
      to connect().  Lots of systems use "int" for the length of socket
      address structures, while Posix.1g specifies "size_t".  Lots of
      systems still have the pointer argument to [sg]etsockopt() as a
      "char *" instead of a "void *", and this also causes warnings.
    
    - SunOS 4.1.x: If you are using Sun's acc compiler, you need to run
      the configure program as
    
            CC=acc CFLAGS=-w CPPFLAGS=-w ./configure
    
      Failure to do this results in numerous system headers (<sys/sockio.h>)
      not being found during configuration, causing compile errors later.
    
    - If your system supports IPv6 and you want to run the examples in the
      book using hostnames, you must install the latest BIND release.  You
      can get it from ftp://ftp.vix.com/pub/bind/release.  All you need from
      this release is a resolver library that you should then add to the
      LDLIBS and LDLIBS_THREADS lines.
    
    - IPv6 support is still in its infancy.  There may be differences
      between the IPv6 sockets API specifications and what the vendor
      provides.  This may require hand tweaking, but should get better
      over time.
    
    - If your system supports an older draft of the Posix pthreads standard,
      but configure detects the support of pthreads, you will have to disable
      this by hand.  Digital Unix V3.2C has this problem, for example, as it
      supports draft 4, not the final draft.
    
      To fix this, remove wrappthread.o from LIB_OBJS in "Make.defines" and
      don't try to build and run any of the threads programs.
    
    COMMON DIFFERENCES
    ------------------
    
    These are the common differences that I see in various headers that are
    not "yet" at the level of Posix.1g or X/Open XNS Issue 5.
    
    - getsockopt() and setsockopt(): 5th argument is not correct type.
    
    - t_bind(): second argument is missing "const".
    
    - t_connect(): second argument is missing "const".
    
    - t_open(): first argument is missing "const".
    
    - t_optmsmg(): second argument is missing "const".
    
    - If your <xti.h> defines the members of the t_opthdr{} as longs,
      instead of t_uscalar_t, some of the printf formats of these value
      might generate warnings from your compiler, since you are printing
      a long without a corresponding long format specifier.

    注意:以后我们都用make编译源代码

    最后运行:./daytimetcpcli 127.0.0.1如下

    acer@ubuntu:~/jwt/unpv13e/intro$ ./daytimetcpcli 127.0.0.1
    connect error: Connection refused

    发现报错:connect error: Connection refused

    这种情况说明服务器没有启动daytime服务!那Ubuntu如何启动,daytime服务呢?

    Ubuntu启动daytime服务

    1. sudo apt-get install xinetd
    2. sudo vi /etc/xinetd.d/daytime, 把 disable = yes to no
    3. sudo /etc/init.d/xinetd restart

    在运行 ./daytimetcpcli 127.0.0.1

    出现结果!!

    参考:http://blog.csdn.net/baikaishui525/article/details/7013907

    根目录下生成Make.defines如下:

    #
    # This file is generated by autoconf from "Make.defines.in".
    #
    # This is the "Make.defines" file that almost every "Makefile" in the
    # source directories below this directory include.
    # The "../" in the pathnames actually refer to this directory, since
    # "make" is executed in all the subdirectories of this directory.
    #
    # System = i686-pc-linux-gnu
    
    CC = gcc
    CFLAGS = -I../lib -g -O2 -D_REENTRANT -Wall
    LIBS = ../libunp.a -lpthread
    LIBS_XTI = ../libunpxti.a ../libunp.a -lpthread
    RANLIB = ranlib
    
    # Following is the main library, built from all the object files
    # in the lib/ and libfree/ directories.
    LIBUNP_NAME = ../libunp.a
    
    # Following is the XTI library, built from all the object files
    # in the libxti/ directory.
    LIBUNPXTI_NAME = ../libunpxti.a
    
    # Following are all the object files to create in the lib/ directory.
    LIB_OBJS =  connect_nonb.o connect_timeo.o daemon_inetd.o daemon_init.o dg_cli.o dg_echo.o error.o get_ifi_info.o gf_time.o host_serv.o family_to_level.o mcast_leave.o mcast_join.o mcast_get_if.o mcast_get_loop.o mcast_get_ttl.o mcast_set_if.o mcast_set_loop.o mcast_set_ttl.o my_addrs.o read_fd.o readline.o readn.o readable_timeo.o rtt.o signal.o signal_intr.o sock_bind_wild.o sock_cmp_addr.o sock_cmp_port.o sock_ntop.o sock_ntop_host.o sock_get_port.o sock_set_addr.o sock_set_port.o sock_set_wild.o sockfd_to_family.o str_cli.o str_echo.o tcp_connect.o tcp_listen.o tv_sub.o udp_client.o udp_connect.o udp_server.o wraplib.o wrapsock.o wrapstdio.o wrappthread.o wrapunix.o write_fd.o writen.o writable_timeo.o
    
    # Following are all the object files to create in the libfree/ directory.
    LIBFREE_OBJS =  in_cksum.o inet_ntop.o inet_pton.o
    
    # Following are all the object files to create in the libgai/ directory.
    LIBGAI_OBJS = 
    
    # Following are all the object files to create in the libroute/ directory.
    LIBROUTE_OBJS = get_rtaddrs.o if_indextoname.o if_nameindex.o if_nametoindex.o net_rt_iflist.o net_rt_dump.o sock_masktop.o
    
    # Following are all the object files to create in the libxti/ directory.
    LIBXTI_OBJS =  wrapxti.o xti_accept.o xti_flags_str.o xti_getopt.o xti_ntop.o xti_ntop_host.o xti_rdwr.o xti_setopt.o xti_str_opts.o xti_tlook_str.o
    
    CLEANFILES = core core.* *.core *.o temp.* *.out typescript* 
            *.lc *.lh *.bsdi *.sparc *.uw

    lib文件夹makefie内容:

    include ../Make.defines

    all: ${LIB_OBJS}
    ar rv ${LIBUNP_NAME} $?
    ${RANLIB} ${LIBUNP_NAME}

    clean:
    rm -f ${PROGS} ${CLEANFILES}

    intro文件夹下的lib文件Makefile如下:

    include ../Make.defines
    
    PROGS =    daytimetcpcli daytimetcpcli1 daytimetcpcli2 daytimetcpcli3 
            daytimetcpsrv daytimetcpsrv1 daytimetcpsrv2 daytimetcpsrv3 
            daytimetcpcliv6 daytimetcpsrvv6 
            byteorder
    
    all:    ${PROGS}
    
    daytimetcpcli:    daytimetcpcli.o
            ${CC} ${CFLAGS} -o $@ daytimetcpcli.o ${LIBS}
    
    daytimetcpcli1:    daytimetcpcli1.o
            ${CC} ${CFLAGS} -o $@ daytimetcpcli1.o ${LIBS}
    
    daytimetcpcli2:    daytimetcpcli2.o
            ${CC} ${CFLAGS} -o $@ daytimetcpcli2.o ${LIBS}
    
    daytimetcpcli3:    daytimetcpcli3.o
            ${CC} ${CFLAGS} -o $@ daytimetcpcli3.o ${LIBS}
    
    daytimetcpsrv:    daytimetcpsrv.o
            ${CC} ${CFLAGS} -o $@ daytimetcpsrv.o ${LIBS}
    
    daytimetcpsrv1:    daytimetcpsrv1.o
            ${CC} ${CFLAGS} -o $@ daytimetcpsrv1.o ${LIBS}
    
    daytimetcpsrv2:    daytimetcpsrv2.o
            ${CC} ${CFLAGS} -o $@ daytimetcpsrv2.o ${LIBS}
    
    daytimetcpsrv3:    daytimetcpsrv3.o
            ${CC} ${CFLAGS} -o $@ daytimetcpsrv3.o ${LIBS}
    
    daytimetcpcliv6:    daytimetcpcliv6.o
            ${CC} ${CFLAGS} -o $@ daytimetcpcliv6.o ${LIBS}
    
    daytimetcpsrvv6:    daytimetcpsrvv6.o
            ${CC} ${CFLAGS} -o $@ daytimetcpsrvv6.o ${LIBS}
    
    byteorder:    byteorder.o
            ${CC} ${CFLAGS} -o $@ byteorder.o ${LIBS}
    
    clean:
            rm -f ${PROGS} ${CLEANFILES}

    在select下,编译某个包含unp.h的文件。

     gcc -c strcliselect01.c  -I ../lib

    ubuntu搭建:

    http://lingshaohuprose.blog.163.com/blog/static/169579782201232505248560/

    http://blog.csdn.net/hongkangwl/article/details/24013863

    http://blog.sina.com.cn/s/blog_a43aba560101a7gf.html

  • 相关阅读:
    Windows phone 应用开发系列教程(更新中)
    ios实例开发精品文章推荐(8.14)
    Android开发环境——调试器 DDMS相关内容汇总
    docker 发布应用时添加 git revision
    docker环境下数据库的备份(postgresql, mysql)
    golang web 方案
    golang 1.12 自动补全
    区块链简介
    天空的另一半
    Ecto中的changeset,schema,struct,map
  • 原文地址:https://www.cnblogs.com/youxin/p/3931555.html
Copyright © 2020-2023  润新知