• 【转载】Linux查看PCIe版本及速率【方法】PCIE的X4X8X16 查看 数量 怎么看


    Linux查看PCIe版本及速率

     

    PCIE有四种不同的规格,通过下图来了解下PCIE的其中2种规格

     

    查看主板上的PCI插槽

    # dmidecode | grep --color "PCI"

     

    不同PCIe版本对应的传输速率如下:

     

    传输速率为每秒传输量GT/s,而不是每秒位数Gbps,因为传输量包括不提供额外吞吐量的开销位; 
    比如PCIe 1.x和PCIe 2.x使用8b/10b编码方案,导致占用了20% (= 2/10)的原始信道带宽。

    GT/s —— Giga transation per second (千兆传输/秒),即每一秒内传输的次数。重点在于描述物理层通信协议的速率属性,可以不和链路宽度等关联。

    Gbps —— Giga Bits Per Second (千兆位/秒)。GT/s 与Gbps 之间不存在成比例的换算关系。


    PCIe 吞吐量(可用带宽)计算方法:
    吞吐量 = 传输速率 * 编码方案

    例如:PCI-e2.0 协议支持 5.0 GT/s,即每一条Lane上支持每秒钟内传输5G个Bit;但这并不意味着 PCIe 2.0协议的每一条Lane支持 5Gbps 的速率。

    为什么这么说呢?因为PCIe 2.0 的物理层协议中使用的是8b/10b的编码方案。 即每传输8个Bit,需要发送10个Bit;这多出的2个Bit并不是对上层有意义的信息。
    那么,PCIe 2.0协议的每一条Lane支持 5 * 8 / 10 = 4 Gbps = 500 MB/s 的速率。
    以一个PCIe 2.0 x8的通道为例,x8的可用带宽为 4 * 8 = 32 Gbps = 4 GB/s。

    PCI-e3.0 协议支持 8.0 GT/s, 即每一条Lane 上支持每秒钟内传输 8G个Bit。
    而PCIe 3.0 的物理层协议中使用的是 128b/130b 的编码方案。 即每传输128个Bit,需要发送130个Bit。
    那么, PCIe 3.0协议的每一条Lane支持 8 * 128 / 130 = 7.877 Gbps = 984.6 MB/s 的速率。
    一个PCIe 3.0 x16的通道,x16 的可用带宽为 7.877 * 16 = 126.031 Gbps = 15.754 GB/s。

     

    在 Linux 下要如何得知 PCI-E Bus 使用的是 Gen(Generation) 1 還是 Gen2 還是新一代的 Gen 3 雖然使用 
    #lspci 只要可以看到目前系統所有的裝置.但是好像看不到 PCI-E Bus 所採用的是哪一代的 PCI-E.

    复制代码
    root@XXX# lspci 
    00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06)
    00:01.1 PCI bridge: Intel Corporation Haswell PCI Express x8 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05)
    00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05)
    00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d5)
    00:1c.4 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #5 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 05)
    00:1f.2 IDE interface: Intel Corporation Lynx Point 4-port SATA Controller 1 [IDE mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation Lynx Point Thermal Management Controller (rev 05)
    01:00.0 PCI bridge: PLX Technology, Inc. Unknown device 8724 (rev ca)
    02:01.0 PCI bridge: PLX Technology, Inc. Unknown device 8724 (rev ca)
    02:02.0 PCI bridge: PLX Technology, Inc. Unknown device 8724 (rev ca)
    02:08.0 PCI bridge: PLX Technology, Inc. Unknown device 8724 (rev ca)
    02:09.0 PCI bridge: PLX Technology, Inc. Unknown device 8724 (rev ca)
    03:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    03:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    03:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    03:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    04:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    04:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    06:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    06:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    07:00.0 PCI bridge: PLX Technology, Inc. PEX 8732 32-lane, 8-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
    08:01.0 PCI bridge: PLX Technology, Inc. PEX 8732 32-lane, 8-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
    08:08.0 PCI bridge: PLX Technology, Inc. PEX 8732 32-lane, 8-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
    08:09.0 PCI bridge: PLX Technology, Inc. PEX 8732 32-lane, 8-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
    08:0a.0 PCI bridge: PLX Technology, Inc. PEX 8732 32-lane, 8-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
    09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    0e:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
    0f:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
    root@XXX# 
    复制代码

     

    复制代码
    root@XXX# lspci -tv
    -[0000:00]-+-00.0  Intel Corporation Haswell DRAM Controller
               +-01.0-[0000:01-06]----00.0-[0000:02-06]--+-01.0-[0000:03]--+-00.0  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 +-00.1  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 +-00.2  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 -00.3  Intel Corporation I350 Gigabit Network Connection
               |                                         +-02.0-[0000:04]--+-00.0  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 +-00.1  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 +-00.2  Intel Corporation I350 Gigabit Network Connection
               |                                         |                 -00.3  Intel Corporation I350 Gigabit Network Connection
               |                                         +-08.0-[0000:05]--
               |                                         -09.0-[0000:06]--+-00.0  Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
               |                                                           -00.1  Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
               +-01.1-[0000:07-0c]----00.0-[0000:08-0c]--+-01.0-[0000:09]--+-00.0  Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
               |                                         |                 -00.1  Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
               |                                         +-08.0-[0000:0a]--
               |                                         +-09.0-[0000:0b]--
               |                                         -0a.0-[0000:0c]--
               +-02.0  Intel Corporation Haswell Integrated Graphics Controller
               +-03.0  Intel Corporation Haswell HD Audio Controller
               +-14.0  Intel Corporation Lynx Point USB xHCI Host Controller
               +-16.0  Intel Corporation Lynx Point MEI Controller #1
               +-1a.0  Intel Corporation Lynx Point USB Enhanced Host Controller #2
               +-1c.0-[0000:0d]--
               +-1c.4-[0000:0e]----00.0  Intel Corporation I210 Gigabit Network Connection
               +-1c.5-[0000:0f]----00.0  Intel Corporation I210 Gigabit Network Connection
               +-1d.0  Intel Corporation Lynx Point USB Enhanced Host Controller #1
               +-1f.0  Intel Corporation Lynx Point LPC Controller
               +-1f.2  Intel Corporation Lynx Point 4-port SATA Controller 1 [IDE mode]
               +-1f.3  Intel Corporation Lynx Point SMBus Controller
               -1f.6  Intel Corporation Lynx Point Thermal Management Controller
    root@XXX# 
    复制代码

     

    如果有裝置是 unknown 的,需要更新 /usr/local/share/pci.ids.gz 請參考更新方式 http://benjr.tw/node/88

     

    先查询 Inetl 82599EB 网卡的识别号(bus:device.function)

    复制代码
    root@XXX# lspci | grep --color 82599  
    06:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    06:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
    root@XXX# 
    复制代码

     

    在 PCI 的裝置使用三個編號用來當作識別值,個別為 1. "匯流排(bus number)", 2. "裝置(device number) 以及 3. "功能(function number)".
    所以剛剛的 06:00.0 就是 bus number = 06 ,device number = 00 function = 0 .

    這3個編號會組合成一個 16-bits 的識別碼,

    匯流排(bus number) 8bits 2^8 至多可連接 256 個匯流排(0 to ff), 
    裝置(device number) 5bits 2^5 至多可接 32 種裝置(0 to 1f) 以及 
    功能(function number) 3bits 2^3 至多每種裝置可有 8 項功能(0 to 7).
    關於更多 #lspci 的資訊請參考 http://benjr.tw/node/543

     

    然后查看vendor id和device id

    root@XXX# lspci -n | grep -i 06:00.0
    06:00.0 0200: 8086:10fb (rev 01)
    root@XXX# 

    Linux 使用 Class ID + Vendor ID + Device ID  來代表裝置,如剛剛的  0200: 8086:10fb 所代表裝置名稱為 (Class ID = 0200 , Vendor ID = 8086, Device ID = 10fb)

     

    最后查看指定PCI设备的带宽

    复制代码
    root@XXX# lspci -n -d 8086:10fb -vvv | grep --color  Width
            LnkCap:    Port #9, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
            LnkSta:    Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            LnkCap:    Port #9, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
            LnkSta:    Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            LnkCap:    Port #1, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
            LnkSta:    Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            LnkCap:    Port #1, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
            LnkSta:    Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    root@XXX# 
    复制代码

     

    LnkSta : 目前系統所提供的速度 PCI-Express 2.0 ( 5GT/s )
    LnkCap : 裝置目前所採用的速度.
    LnkSta 和 LnkCap 這兩個速度有可能不一樣 , 典型情况下: 系統所提供的是 PCI Express 是 3.0 但裝置還是使用 2.0 的.

     

  • 相关阅读:
    重构机房收费系统总结1之配置文件+反射+抽象工厂
    win7 下jenkins配置与使用
    ant-jmeter批量脚本
    ant批量运行Jmeter脚本遇到 Content is not allowed in prolog.问题及解决方案
    JMeter学习笔记--JMeter前置处理器
    JMeter学习笔记--详解JMeter定时器
    JMeter学习笔记--详解JMeter配置元件
    JMeter学习笔记--详解JMeter逻辑控制器
    JMeter学习笔记--JMeter监听器
    JMeter学习笔记--创建数据库测试计划
  • 原文地址:https://www.cnblogs.com/xuanbjut/p/10932389.html
Copyright © 2020-2023  润新知