Even relatively new C programmers have no trouble reading simple C declarations such as
int foo[5]; // foo is an array of 5 ints char *foo; // foo is a pointer to char double foo(); // foo is a function returning a double
but as the declarations get a bit more involved, it's more difficult to know exactly what you're looking at.
char *(*(**foo[][8])())[]; // huh ?????
It turns out that the rules for reading an arbitrarily-complex C variable declaration are easily learned by even beginning programmers (though how to actually use the variable so declared may be well out of reach).
This Tech Tip shows how to do it.
Basic and Derived Types
In addition to one variable name, a declaration is composed of one "basic type" and zero or more "derived types", and it's crucial to understand the distinction between them.
The complete list of basic types is:
• char • signed char • unsigned char • short • unsigned short • int • unsigned int • long • unsigned long • float • double • void • struct tag • union tag • enum tag • long long • unsigned long long • long double ANSI/ISO C only
A declaration can have exactly one basic type, and it's always on the far left of the expression.
The "basic types" are augmented with "derived types", and C has three of them:
- * pointer to...
- This is denoted by the familiar * character, and it should be self evident that a pointer always has to point to something.
- [] array of...
- "Array of" can be undimensioned -- [] -- or dimensioned -- [10] -- but the sizes don't really play significantly into reading a declaration. We typically include the size in the description. It should be clear that arrays have to be "arrays of" something.
- () function returning...
- This is usually denoted by a pair of parentheses together - () - though it's also possible to find a prototype parameter list inside. Parameters lists (if present) don't really play into reading a declaration, and we typically ignore them. We'll note that parens used to represent "function returning" are different than those used for grouping: grouping parens surround the variable name, while "function returning" parens are always on the right.
- Functions are meaningless unless they return something (and we accommodate the void type by waving the hand and pretend that it's "returning" void).
A derived type always modifies something that follows, whether it be the basic type or another derived type, and to make a declaration read properly one must always include the preposition ("to", "of", "returning"). Saying "pointer" instead of "pointer to" will make your declarations fall apart.
It's possible that a type expression may have no derived types (e.g., "int i" describes "i is an int"), or it can have many. Interpreting the derived types is usually the sticking point when reading a complex declaration, but this is resolved with operator precedence in the next section.
Operator Precedence
Almost every C programmer is familiar with the operator precedence tables, which give rules that say (for instance) multiply and divide have higher precedence than ("are preformed before") addition or subtraction, and parentheses can be used to alter the grouping. This seems natural for "normal" expressions, but the same rules do indeed apply to declarations - they are type expressions rather than computational ones.
The "array of" [] and "function returning" () type operators have higher precedence than "pointer to" *, and this leads to some fairly straightforward rules for decoding.
Always start with the variable name:
foo is ...
and always end with the basic type:
foo is ... int
The "filling in the middle" part is usually the trickier part, but it can be summarize with this rule:
"go right when you can, go left when you must"
Working your way out from the variable name, honor the precedence rules and consume derived-type tokens to the right as far as possible without bumping into a grouping parenthesis. Then go left to the matching paren.
A simple example
We'll start with a simple example:
long **foo[7];
We'll approach this systematically, focusing on just one or two small part as we develop the description in English. As we do it, we'll show the focus of our attention in red, and strike out the parts we've finished with.
- long **foo [7];
- Start with the variable name and end with the basic type:
- foo is ... long
long**foo[7];- At this point, the variable name is touching two derived types: "array of 7" and "pointer to", and the rule is to go right when you can, so in this case we consume the "array of 7"
- foo is array of 7 ... long
long**foo[7];- Now we've gone as far right as possible, so the innermost part is only touching the "pointer to" - consume it.
- foo is array of 7 pointer to ... long
long**foo[7];- The innermost part is now only touching a "pointer to", so consume it also.
- foo is array of 7 pointer to pointer to long
This completes the declaration!
A hairy example
To really test our skills, we'll try a very complex declaration that very well may never appear in real life (indeed: we're hard-pressed to think of how this could actually be used). But it shows that the rules scale to very complex declarations.
- char *(*(**foo [][8])())[];
- All declaration start out this way: "variable name is .... basictype"
- foo is ... char
char*(*(**foo[] [8])())[];- The innermost part touches "array of" and "pointer to" - go right.
- foo is array of ... char
char*(*(**foo[][8])())[];- It's common in a declaration to alternate right and left, but this is not the rule: the rule is to go as far right as we can, and here we find that the innermost part still touches "array of" and "pointer to". Again, go right.
- foo is array of array of 8 ... char
char*(*(**foo[][8])())[];- Now we've hit parenthesis used for grouping, and this halts our march to the right. So we have to backtrack to collect all the parts to the left (but only as far as the paren). This consumes the "pointer to":
- foo is array of array of 8 pointer to ... char
char*(*(**foo[][8])())[];- Again we are backtracking to the left, so we consume the next "pointer to":
- foo is array of array of 8 pointer to pointer to ... char
char*(*(**foo[][8])())[];- After consuming the "pointer to" in the previous step, this finished off the entire parenthesized subexpression, so we "consume" the parens too. This leaves the innermost part touching "function returning" on the right, and "pointer to" on the left - go right:
- foo is array of array of 8 pointer to pointer to function returning ... char
char*(*(**foo[][8])())[];- Again we hit grouping parenthesis, so backtrack to the left:
- foo is array of array of 8 pointer to pointer to function returning pointer to ... char
char*(*(**foo[][8])())[];- Consuming the grouping parentheses, we then find that the innermost part is touching "array of" on the right, and "pointer to" on the left. Go right:
- foo is array of array of 8 pointer to pointer to function returning pointer to array of ... char
char*(*(**foo[][8])())[];- Finally we're left with only "pointer to" on the left: consume it to finish the declaration.
- foo is array of array of 8 pointer to pointer to function returning pointer to array of pointer to char
We have no idea how this variable is useful, but at least we can describe the type correctly.
Abstract Declarators
The C standard describes an "abstract declarator", which is used when a type needs to be described but not associated with a variable name. These occur in two places -- casts, and as arguments to sizeof -- and they can look intimidating:
int (*(*)())()
To the obvious question of "where does one start?", the answer is "find where the variable name would go, then treat it like a normal declaration". There is only one place where a variable name could possibly go, and locating it is actually straightforward. Using the syntax rules, we know that:
- to the right of all the "pointer to" derived type tokens
- to the left of all "array of" derived type tokens
- to the left of all "function returning" derived type tokens
- inside all the grouping parentheses
Looking at the example, we see that the rightmost "pointer to" sets one boundary, and the leftmost "function returning" sets another one:
int (*(*• ) •())()
The red • indicators show the only two places that could possibly hold the variable name, but the leftmost one is the only one that fits the "inside the grouping parens" rule. This gives us our declaration as:
int (*(*foo)())()
which our "normal" rules describe as:
foo is a pointer to function returning pointer to function returning int
Semantic restrictions/notes
Not all combinations of derived types are allowed, and it's possible to create a declaration that perfectly follows the syntax rules but is nevertheless not legal in C (e.g., syntactically valid but semantically invalid). We'll touch on them here.
- Can't have arrays of functions
- Use "array of pointer to function returning..." instead.
- Functions can't return functions
- Use "function returning pointer to function returning..." instead.
- Functions can't return arrays
- Use "function returning pointer to array of..." instead.
- In arrays, only the leftmost [] can be undimensioned
- C supports multi-dimensional arrays (e.g., char foo[1][2][3][4]), though in practice this often suggests poor data structuring. Nevertheless, when there is more than one array dimension, only the leftmost one is allowed to be empty. char foo[] and char foo[][5] are legal, but char foo[5][] is not.
- "void" type is restricted
- Since void is a special pseudo-type, a variable with this basic type is only legal with a final derived type of "pointer to" or "function returning". It's not legal to have "array of void" or to declare a variable of just type "void" without any derived types.
void *foo; // legal void foo(); // legal void foo; // not legal void foo[]; // not legal
Adding calling-convention types
On the Windows platform, it's common to decorate a function declaration with an indication of its calling convention. These tell the compiler which mechanism should be used to call the function in question, and the method used to call the function must be the same one which the function expects. They look like:
extern int __cdecl main(int argc, char **argv);
extern BOOL __stdcall DrvQueryDriverInfo(DWORD dwMode, PVOID pBuffer,
DWORD cbBuf, PDWORD pcbNeeded);
These decorations are very common in Win32 development, and are straightforward enough to understand. More information can be found in Unixwiz.net Tech Tip: Using Win32 calling conventions
Where it gets somewhat more tricky is when the calling convention must be incorporated into a pointer (including via a typedef), because the tag doesn't seem to fit into the normal scheme of things. These are often used (for instance) when dealing with the LoadLibrary() and GetProcAddress() API calls to call a function from a freshly-loaded DLL.
We commonly see this with typedefs:
typedef BOOL (__stdcall *PFNDRVQUERYDRIVERINFO)(
DWORD dwMode,
PVOID pBuffer,
DWORD cbBuf,
PDWORD pcbNeeded
);
...
/* get the function address from the DLL */
pfnDrvQueryDriverInfo = (PFNDRVRQUERYDRIVERINFO)
GetProcAddress(hDll, "DrvQueryDriverInfo")
The calling convention is an attribute of the function, not the pointer, so in the usual reading puts it after the pointer but inside the grouping parenthesis:
BOOL (__stdcall *foo)(...);
is read as:
foo is a pointer
to a __stdcall function
returning BOOL.
source url:http://www.unixwiz.net/techtips/reading-cdecl.html