Aerospike系列：5：安装AMC

1：需要安装的包，如果缺少，请安装。

python (2.6+)
gcc
python-devel

安装相应的模块

sudo pip install markupsafe
sudo pip install paramiko
sudo pip install ecdsa
sudo pip install pycrypto

　　

2：下载rpm包

wget http://www.aerospike.com/artifacts/aerospike-amc-community/3.6.0/aerospike-amc-community-3.6.0-el5.x86_64.rpm

3：安装aerospike-amc-community-3.6.0-el5.x86_64.rpm

rpm -ivh aerospike-amc-community-3.6.0-el5.x86_64.rpm

　　

详情可以参考这里：http://www.aerospike.com/docs/amc/install/linux/el6/

4：操作指南

Starting the AMC server
To start the AMC:

sudo /etc/init.d/amc start
To stop the AMC server:

sudo /etc/init.d/amc stop
To restart the AMC server:

sudo /etc/init.d/amc restart
To see whether or not the AMC server is up:

sudo /etc/init.d/amc status

配置过程中有任何问题都可以查看错误日志：/var/log/amc/error.log

　　

5：默认的gunicorn_config内容

[root@localhost ~]# cat /etc/amc/config/gunicorn_config.py
bind = "0.0.0.0:8081"
pidfile = "/tmp/amc.pid"
loglevel = "info"
errorlog = "/var/log/amc/error.log"
workers = 1
proc_name = "amc"
chdir = "/opt/amc/server"
timeout = 150
worker_class = "eventlet"

可以编辑bind之后再重启AMC服务。例如改为：192.168.91.132:8081

　　

社区版可以参考这里：http://www.aerospike.com/docs/amc/user_guide/community/

商业版可以参考这里：http://www.aerospike.com/docs/amc/user_guide/enterprise/

 6：在两个服务都启动成功后就可以连接AMC了

[root@localhost bin]# ls
aerospike  asd  bin  etc  share  var
[root@localhost bin]# ./aerospike status
info: process running
[root@localhost bin]# /etc/init.d/amc status
Retrieving AMC status....
AMC is running.
[root@localhost bin]# 

浏览器输入：

输入192.168.91.132连接即可。

如果提示：

请检查主机上的3000和8081端口的监听服务是否正常。

 详情参考：http://www.aerospike.com/docs/amc/user_guide/community/dashboard.html