• ipv6 dhcp network relay 配置说明


    配置>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    config dhcp 'lan' option interface 'lan' # 绑定接口 option start '100' # 不再使用 option limit '150' option force '1' option leasetime '720m' # option ignore '0' # Specifies whether dnsmasq should ignore this pool if set to 1 option ra_management '1' # DHCPv6模式 RA management mode : no M-Flag but A-Flag (0), both M and A flags (1), M flag but not A flag (2) option ra_mininterval '10' # 最小RA间隔 Minimum time interval between RAs (in seconds) option ra_maxinterval '15' # 最大RA间隔 Maximum time interval between RAs (in seconds) option ra 'relay' # 路由通告 Specifies whether Router Advertisements should be enabled (server), relayed (relay) or disabled (disabled option dhcpv6 'server' # DHCPv6服务 Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled option ndp 'relay' # NDP代理 Specifies whether NDP should be relayed (relay) or disabled (disabled list dhcp_option '43,192.168.1.3' # 43 表示供应商指定信息
        
    list dhcp_option '3,192.168.1.3' # 3 默认路由
       list dhcp_option '6,192.168.1.3' # 6 默认dns
    list range '192.168.1.20 192.168.1.30' # dhcp地址范围, 用空格分开

    openwrt 官方文档: --> https://openwrt.org/docs/guide-user/base-system/dhcp 

    保存>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    save_dhcp_server
    /etc/init.d/network reload >/dev/null 2>/dev/null;
    /etc/init.d/dnsmasq restart
    /etc/init.d/dhcpd stop;sleep 1;/etc/init.d/dhcpd start;/etc/init.d/odhcpd restart
    dhcrelay配置>>>>>>>>>>>>>>>>>>>>>>>>>>>>


    config dhcrelay 'ipv4'
       option dhcpserver '10.10.10.254'               # v4目标服务器
      option enabled '1'                             # 在接口上启用DHCPv4中继 
      option relay_mode 'forward'                    # 代理选项 What to do about packets that already have a relay option
      option upstream_interfaces 'lan'               # 监听上行口
      option downstream_interfaces 'yy'              # 监听下行口

    config dhcrelay 'ipv6'
      option dhcpserver '2001:db8:1::1'              #v6 目标服务器 
      option enabled '1'                             # 启用开关
      option upper 'wan'                             # 监听上行口
      list lower 'yy'                                # 监听下行口


    /etc/init.d/dhcrelay4 restart ;/etc/init.d/dhcrelay6 restart

     静态路由

    config route6 'ww'
            option name 'ww'                       # 配置名称             
            option metric '12'                    # metric
            option mtu '1500'                     # MTU 
            option target '1.1.1.1'               # 目的地址
            option gateway '2.2.2.2'              # IPv6 网关
            option type 'broadcast'               # 路由类型 
            option table 'main'                   # 路由表
            option onlink '1'                     # 路由在线
            option interface 'lan'                # 接口

    os.execute("/etc/init.d/network reload;")
  • 相关阅读:
    Python学习第二天
    Python学习第一天
    linux下使用命令修改IP地址
    Java消息队列
    转:《什么是敏捷软件测试》
    测试流程优化
    MacOS安装使用Kettle
    用OneNote写博客的方法
    Matlab给三维点云添加高斯噪声和随机噪声
    如何高效完成英文文献翻译
  • 原文地址:https://www.cnblogs.com/xiaohuamao/p/12978911.html
Copyright © 2020-2023  润新知