• centos6.x 配置bond


    centos6.x 配置bond

    摘要: centos6.x下使用双网卡配置bond0, centos6 bond配置不需要在/etc/modprobe 中定义bond 直接在网卡中定义BONDING_OPTS 即可,例如bond0: BONDING_OPTS="mode=0 miimon=100"

    物理网卡eth0 eth1绑定为bond0

    1 物理网卡配置

    ifcfg-eth0

    DEVICE=eth0
    ONBOOT=yes
    BOOTPROTO=none
    MASTER=bond0
    SLAVE=yes
    

      

    ifcfg-eth1

    DEVICE=eth1
    ONBOOT=yes
    BOOTPROTO=none
    MASTER=bond0
    SLAVE=yes
    

      

    2 bond0网卡配置

    ifcfg-bond0

    DEVICE=bond0
    ONBOOT=yes
    BOOTPROTO=none
    IPADDR=xx.xx.xx.xx
    NETMASK=xx.xx.xx.xx
    GATEWAY=xx.xx.xx.xx
    DNS1=xx.xx.xx.xx
    BONDING_OPTS="mode=0 miimon=100"
    

      

    重启网卡

    service network restart
    

      

    3 查看bond0网卡状态

    [root@localhost network-scripts]# cat /proc/net/bonding/bond0
    EthernetChannelBondingDriver: v3.7.1(April27,2011)
    BondingMode: load balancing (round-robin)
    MII Status: up
    MII PollingInterval(ms):100
    UpDelay(ms):0
    DownDelay(ms):0
    SlaveInterface: eth1
    MII Status: up
    Speed:1000Mbps
    Duplex: full
    LinkFailureCount:0
    Permanent HW addr:00:0c:29:a1:34:eb
    Slave queue ID:0
    SlaveInterface: eth2
    MII Status: up
    Speed:1000Mbps
    Duplex: full
    LinkFailureCount:0
    Permanent HW addr:00:0c:29:a1:34:e1
    Slave queue ID:0
    

    Tips: 日志可以使用tailf /var/log/messages实时查看

  • 相关阅读:
    聊一聊Java泛型的擦除
    微信退款通知信息解密
    Spring Boot 初识
    shiro初识
    Redis 初探
    Java Json库的选取准则
    JAVA 几款Json library的比较
    FUSE简介
    Lab 2 源码分析
    Lab2
  • 原文地址:https://www.cnblogs.com/wglee/p/6807229.html
Copyright © 2020-2023  润新知